Grundig Atlanta 48 CLX 8586 SP User manual

ENGLISH
2
Detailed instruction manual
You can find the detailed
instructions at www.grundig.
de under “Service”.
2 EU directives
3 About your TV set
3 Intended use
4 Safety
5 Environmental information
6 Packing contents
7 Setting up or hanging
8 Connections
9 Control elements
9 Multi-function switch
10 Inserting batteries into the remote
control
10 Setting up the TV set
10 Adding new TV stations at a later
point
10 Sorting TV stations in the channel list
11 Remote control
12 Favourites lists
12 Zapping function
12 HbbTV
13 Recording from digital TV stations
13 Watching TV with time shift
14 Media player
14 SMART inter@ctive TV 4.0
14 Web browser
15 Product data sheet
16 Licence
16 Network interfaces
16 Cleaning the TV set
16 Abbreviations
Table of Contents
EU directives
This product complies
with the following EU
directives:
1995/5/EC, 2004/108/EC, 2006/95/
EC, 2009/125/EC, 2010/30/EU and
2011/65/EU.
TV’s wireless system can only be used in
the countries below.
AT, BE, BG, CH, CY, CZ, DE, DK, EE, ES, FI,
FR, GB, GR, HU, IE, IS, IT, LI, LT, LU, LV, MT,
NL, NO, PL, PT, RO, SE, SI, SK, TR.

3
ENGLISH
About your TV set
7 With your TV set, you can receive and
watch digital TV programmes over DVB-
S, DVB-T and DVB-C, along with ana-
logue TV.
7 Many features of the TV set require an In-
ternet connection. The TV set is equipped
with WLAN and a LAN port.
7
The TV set can record TV programmes.
For this feature you need a USB storage
device, such as an external hard drive
(not included). Recorded TV programmes
can only be played on the same TV set.
After the TV st is repaired, it is possible
that recorded programmes may no longer
be able to be played back.
7 The twin-triple tuner enables PIP function
so you can view one TV programme in
the main picture and another in an inset
picture.
You can now also view one TV pro-
gramme while recording another pro-
gramme.
7 You can connect various data media, for
example, an external hard drive, a USB
memory stick or a digital camera to the
USB sockets. Using the file browser, you
can then select and play the file formats
you want (for example, MP4, MP3 or
JPEG data).
7 With the Time Shift function, you can eas-
ily stop and resume a programme with
the remote control in a fast and simple
way. Programme is recorded to the exter-
nal data medium.
Intended use
7 The TV set is designed for use in dry
rooms.
7 Use the TV set with the supplied stand or
a suitable VESA bracket.
7 The TV set is primarily intended for the
playback of TV programmes, streaming
content and audio/video material from
external devices. Any other use is strictly
prohibited.
It is not intended as an information
display or for predominant use as a
computer monitor. If a still image or a
non-full-format image is displayed for
an extended period, visible traces may
remain on the screen for some time.
This is not a defect that can be used as
the basis for a warranty claim.

ENGLISH
4
Safety
WARNING
Risk of electrical accident
7 Do not open the TV set. Safety risk may
arise and also the guarantee of the
product can be void if the television set is
opened.
7 The TV set can only be operated with the
power cable or the AC/DC adapter sup-
plied with the product.
7 Do not operate the TV set with a dam-
aged power cord/AC/DC adaptor (if
supplied).
7 If the plug on the TV set has an earthing
contact, only insert the plug into a socket
with an earthing contact.
7 Plug the TV set into the mains socket only
after you have connected the external
devices and the antenna.
7 Protect the TV set from moisture. Do not
place any vessels filled with water (such
as vases) on the TV.
Fire hazard
7 To prevent the spread of fire,
keep candles or other open
flames away from this product
at all times.
7 Do not cover the ventilation slots on the
TV set.
7 Always unplug the power plug and an-
tenna plug during a thunderstorm.
7 Keep candles or other open flames away
from the TV set.
7 Do not expose the batteries to extreme
heat such as sunshine, fire or the like.
7 Only use batteries of the same type
(brand, size, properties). Do not use used
and new batteries together.
WARNING
Injuries caused by falling TV set
Never place the TV set on an unstable sur-
face. The TV set may fall, causing serious
injury, possibly leading to death in isolated
cases.
Observe the following precautions:
7 Only use the manufacturer’s recommend-
ed cabinets or stands.
7 Only use furniture that can safely support
the TV set.
7 Make sure that the TV set does not
protrude beyond the dimensions of the
furniture on which it is resting.
7 Do not place the TV set on tall furniture
(such as kitchen cabinets, bookshelves)
without securely anchoring the furniture
and TV set.
7 Do not place the TV set on fabric or other
materials located between the TV set and
furniture.
7 Instruct children that there is danger as-
sociated with climbing on furniture when
the TV set is to be reached.

5
ENGLISH
NOTICE
Shortened service life due to high
operating temperature
7 Do not place the TV set next to heating
units or in direct sunlight.
7 To ensure adequate ventilation, maintain
clearance of at least 10 cm around the
TV set.
Discolouration of furniture due to
rubber feet
7 Some furniture surfaces may discolour
when they come in contact with rubber.
To protect furniture, you can place a
sheet made of glass or plastic under the
stand. Do not use textile underlays or
mats such as doilies.
Environmental information
7 Do not dispose of batteries in
the household waste. Used
batteries must be returned to
retail stores or public collection points.
You help to protect the environment in this
way.
7 Be sure to dispose of packaging materi-
als for your product separately according
to the guidelines of local authorities so
that they can be recycled in an environ-
mentally safe manner.
7
If you are not using your TV set for a
while, turn it to standby mode. In standby
mode, the TV set uses very little energy
(≤ 0.5 W).
If you do not use the TV set for an ex-
tended period, turn it off with the power
switch or unplug the power cord from
the socket. If you turn off the device or
disconnect it from the power supply, the
switch-on timer and programmed record-
ings will not work.
7 Select a location for the TV set so that
no direct sunlight falls on the screen. This
allows a lower backlight to be selected,
which saves energy.
7 Do not dispose of the product
along with normal household
waste at the end of its service
life. Take it to a recycling centre for
electrical and electronic equipment.

ENGLISH
6
Packing contents
Standart accessory
1. TV
2. Stand
3. Remote control
4. Batteries for remote controls
5. Screws and mounting instructions
for stand
6. Brief Instruction
Optional accessory
Easy-Use Remote Control
Batteries for Easy-Use remote controls
Cleaning cloth
4
2
1
5
3
MAIN
SUB
6

7
ENGLISH
Setting up or hanging
7 Select a location so that no direct sunlight
falls on the screen.
Setting up with stand
7 To mount the stand, refer to the installa-
tion instructions included.
7 Place the TV set on a hard, level surface.
Preparing for mounting on
the VESA bracket
You will need:
7 A pair of scissors,
7 A crosstip screwdriver.
Follow the installation instructions for the
VESA bracket.
1. Place the TV set in the film on a smooth
surface with the screen facing down.
2. Cut open the film on the back side us-
ing the scissors.
3. Connect the required cables to the con-
nectors on the TV set. See the “Connec-
tions” section in this manual.
4. Tie the cables so they do not hang
down onto the floor.
5. Screw the VESA bracket onto the TV set
and mount it according to its installation
instructions.
SCART/ S-VHS / COMPONENT
OpticOut SERVICE
ONLY
LAN
SATELLITE
ANTIN
HDMI4(ARC)HDMI3
USB3
MAIN
SUB
VESA

ENGLISH
8
Connections
SCART / S-VHS / COMPONENT
OpticOut SERVICE
ONLY
LAN
SATELLITE
ANTIN
HDMI4(ARC)HDMI3
USB 3
SCART / S-VHS / COMPONENT
Optic Out SERVICE
ONLY
LAN
SATELLITE
ANT IN
HDMI4 (ARC)HDMI3
USB 3
MAIN
SUB
MAIN
SUB

9
ENGLISH
7 Optic Out: optical audio output
7 LAN: Network connection
7 Service Only: Service only.
7 SCART / S-VHS / COMPONENT:
SCART socket, audio/video input and
output
S-VHS socket, audio/video input for
S-Video camera using a SCART-S-VHS
adapter cable.
Component socket, audio/video input
(YUV signal) using a SCART-YPbPr
adapter cable.
7 USB 3: connect data media for record-
ing programmes, such as an external
hard disk.
7 HDMI4 (ARC): Input for digital audio
and video data with audio return chan-
nel.
7 HDMI3: Input for digital audio and im-
age data.
7 SATELLITE:
MAIN: for satellite antenna. Suitable for
single-cable GSCR system.
SUB: for the second satellite signal
(DVB-S).
7 ANT IN: for antenna cable (terrestrial
antenna or cable connection).
7 U: Headphone jack or line output via
adapter.
7 C I 1, CI2: for CA modules for receiving
encrypted stations.
7 USB 1: connect data media for record-
ing programmes, such as an external
hard disk.
7 USB 2: for data media or keyboard.
7 HDMI1 (MHL): Connect input for digi-
tal audio and video data, mobile devices
with Mobile High-Definition Link here.
7 HDMI2: Input for digital audio and im-
age data.
Control elements
7 O/I: Power switch
Note:
7 There shall not be any obstacle around
Power switch and shall remain readiliy
operable.
7 8/I/M: Multi-function switch
Multi-function switch
Switching on the TV
Press or rock the multi-function switch.
Turning the TV to standby
1. Press the multi-function switch.
2. Rock until “Switch to standby” is
selected.
3. Press.
Adjusting the volume or
changing the station
1. Press the multi-function switch.
2. Rock to select the required function.
3. Press.
4. Rocking now performs the selected
function.

ENGLISH
10
Inserting batteries into the
remote control
1. Open the battery compartment.
2. Insert batteries as marked on the
bottom of the battery compartment
(2 × Micro/R03/AAA).
3. Close the battery compartment.
Setting up the TV set
1. Connect the cables.
2. Insert the power plug into the socket.
3. Switch on the power switch.
4. Switch on the TV set with on the
remote control.
5. Follow the setup wizard on the screen.
Adding new TV stations
at a later point
1. Press .
2. Select »Settings«.
3. Select »Source Setup«.
4. Select »Automatic Channel Search«.
5. Select the antenna type.
6. The next procedure depends on the
selected antenna. Follow the instructions
on the screen.
Sorting TV stations in
the channel list
1. Press .
2. Press .
3. Choose the TV station you want to
move, and highlight it with .
4. Press .
5. Select the »Move« line and confirm
with .
6. Use the navigation keys to move the TV
station to the new position and confirm
with .

11
ENGLISH
Remote control
Cursor Control
Moves the cursor up and
down in the menus.
Moves the cursor left/right
in menus.
Opens channel list;
activates various functions.
Turns on and off the
television set (stand-by).
Signal source
Turns volume on/off
(mute).
Opens 3D menu.
Zapping function;
switches the menus back
one menu level.
Opens the menu.
Opens the Tools menu.
Switches between teletext
and TV modes.
Opens MyApps menu.
Switches on from standby;
selects stations step by step
Adjusts the volume.
Displays information.
Exits menu and
applications.
Opens the channel list.
Opens the electronic TV
guide.
Switches on from standby
mode;
selects channels directly.
Selects the channel list
(»ALL«, »FAV 1« to
»FAV 4«).
Record, playback, pause
or stop (only digital televi-
sion channels);
teletext on half screen.
Opens Netflix applications Opens Media Player
menu.
Functions according to
the screen help, HbbTV.
Next/previous image/
chapter, next/previous
track.
Select subtitle
Select audio channel
PIP function on/off