Grundig Vanto GLED1907HD User manual

VANTO HD LED LCD TV
GLED1907HD
GLED2207HD
Gold Technical Support Line: 1902 215 259
(Charges will apply at $2.95 per minute)

- 1 -
Introduction
Thank you for buying this Grundig product, which is designed to give you
many years of trouble-free service.
You may already be familiar with using a similar unit, but please take time to
read these instructions. They are designed to familiarise you with the unit‟s
many features and to ensure you get the very best from your purchase.
Safety is important
Your safety and the safety of others is important.
Therefore, please ensure you read the “Safety Instructions” before you
operate this unit.
Warranty
In the unlikely event that your product fails to work normally, please call the
below free phone number to discuss the problem with one of our qualified
service engineers.
Australia.
Grundig Warranty: 1800 509 394
New Zealand
Grundig Warranty: 0800 450 259

- 2 -
Contents
Introduction ………………………………….................1
Safety Instructions……………………………………... 3
Unpacking ………………………………………........... 5
Wall Mount Bracket Installation Guidelines ……..… 6
View of TV.............………..…………………………... 7
LED LCD TV Functions ………..……………………… 8
Remote Control …………………..............................9
Remote Control Function …………………...............10
Installation and Connection ……………..................12
TV Screen Operation......................................................13
TV Channel Menu and Adjustments...…........................15
USB Operation Instruction ….…………………………… 25
Troubleshooting ..….…………………………….............. 28
Notes …………….……………………………….……. 29
Specifications ….………………………………………..... 31
Display Modes .…………………………………………....33
Warranty.........................................................................34

- 3 -
Safety Instructions
1. Do not use this television near water.
2. Clean with a dry cloth only.
3. Do not block any ventilation openings. Install in accordance with the
manufacturers instructions.
4. Do not install near any heat sources such as radiators, heat registers,
stoves, or other devices (including amplifiers) that produce heat.
5. Protect the power cord from being walked on or pinched particularly at the
wall socket or TV AC Input.
6. Only use attachments/accessories specified in this manual.
7. Unplug this television during lightning storms or when unused for long
periods of time.
8. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as
damage to the power-supply cord or plug,liquid has been spilled or objects
that have fallen into the television, the television has been exposed to rain or
moisture, the unit stops operating normally, or has been dropped.
9. The television should not be exposed to dripping or splashing water and no
objects filled with liquids, such as vases, should be placed on the television.
10. Beaware, if the television is to be built into a compartment or similar enclosed space,
heat build-up can occur and can reduce the service life of your television and
can be dangerous. Make sure you leave plenty of space around the unit.

- 4 -
Installation Notes
This TV can be connected to AC 100-240 Volts,50/60 Hz power source.
Never connect straight to a DC supply or any other power supply.
Locate the TV in the room where the light does not directley strike the screen.
Total darkness or a reflection on the picture screen can cause eyestrain.
Soft and indirect lighting is recommended for comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Avoid excessively warm locations to prevent possible damage to the
cabinet or premature component failure.
Do not cover the ventilation openings when using the TV.
Additional Safety Notes
Never tamper with any components inside the TV, or any other
adjustmentsnot mentioned in this manual.
To clean up dust, water-dropsor smudges from the screen or cabinet,use
a dry soft cloth. Also make sure you disconnectthe TV when you are cleaning
the unit.
During thunder and lighting, unplug the power cord and antennato
prevent damage to your TV.
All repairs to this TV should only be performed by qualified technician.
WARNING:
To prevent fire or shock hazard, do not expose this unit to rain or moisture.
Do not remove cover, no user serviceable parts inside, refer servicing to
qualified service personnel.

- 5 -
Unpacking
___________________________________________
Please make sure that the following items are included with yourLED
LCD TV. If any item is missing, please contact the warranty line.
LED LCD TV
Remote Control
Operation Manual
DC Adaptor
Power Cord
RCA Cable
/
M D A
GA
D V
L ST
S B I LE

- 6 -
Wall Mount Bracket Installation
____________________________________________
1. Place the LED LCD TV on a solid surface. Place soft material over
the front of the screen to avoid any damage or marks.
2. Remove the 4 screws (①②③④) from the bottom of unit and
detatch the stand (Refer to Picture 1).
(Picture 1)
3. Using the plastic cover that came with the LED LCD TV, screw in the
4screws to fix the plastic cover on the bottom of the unit (Refer Picture 2).
(Picture 2)
4. You will need to use 4 screws to attach the TV to a wall mount bracket.
There are 4 VESA holes on the back of the unit (Refer Picture 3).
(Picture 3)
12
34

- 7 -
View of the TV
Front view
Back view
2 1
3
4
5
6
7
8
9
10
23 24
11
12 14 161718 22
21
20 1913 15

- 8 -
2. Remote Sensor
Receives remote signals from the
remote control.
1. Power Indicator
In Power On Mode the indicator will
turn to blue. In Standby mode the
indicator will be red.
3. Power Button
Press the Power Button to turn the
TV to Power On mode or
Standby mode.
7. VOL- Button
The VOL- Button allows you to
decrease the volume level.
6. VOL+ Button
The VOL+ Button allows you to
increase the volume level.
5. CH- Button
The CH- Button allows you to scan
backwards through the channel
guide in TV mode
4. CH+ Button
The CH+ Button allows you to scan
forwards through the channel guide
in TV mode
8. MENU Button
Press the MENU Button to enter the
Main Menu
9. SOURCE Button
Press the SOURCE Button to change
the viewing mode/input source.
The HDMI Input allows you to connect
your HDMI Cable. The RF IN allows you to connect the external aerial.
11.DC Input
The DC Input is where you connect
your 12V Power Supply
10.HDMI Input
12.VGA Input
The VGA Input allows you to connect
your TV to your PC.
The PC Audio Input is required for sound
when you connect the TV to your PC.
15. YPbPr Input Jack
17.Video Input Jack
(for AV source)
16. YPbPr Input Jack
18.YPbPr Input Jack
19.R2, L2 Audio Input Jack
( for AV,S-Video source )
20.R1, L1 Audio Input Jack N
(for YPbPr source)
21.R2, L2 Audio Input Jack
( for AV,S-Video source )
22.
23. S-Video Input Jack
24. RF IN
R1, L1 Audio Input Jack
(for YPbPr source)
13.PC Audio Input
14. Coaxial Output
This is a SPDIF/PCM output only jack.
Use the Coaxial Output to connect your
surround sound system.
LED LCD TV Functions

- 9 -
Remote Control
TV/RADIO EPG FREEZE FAV
MEDIA
HOLD
REPEAT
VGA
DTV
LIST
SUBTITLE
1
4
3
6
10
12
17
16
15
2
5
7
8
11
14
13
9
18
24 27
25 26
28 31
29 30
32 35
33 34
19
21 22
20
23
SOURCE