
EN / 19
wireless connection symbol illuminates
continuously. After completing the initial in-
stallation, you may activate/deactivate it by
pressing on this key. The wireless connec-
tion symbol will flash quickly (at 0.2 second
intervals) until the connection is estab-
lished. When the connection becomes act-
ive, wireless connection symbol flashes
continuously. If the connection cannot be
established for a long period, check your
connection settings and refer to the
“Troubleshooting” section provided in the
user manual. Use HomeWhiz application
for wireless connection. You can find the
installation steps in the application during
installation. You can access the application
by scanning the QR code on the HomeWhiz
label on the appliance. Application is
offered through App Store for IOS devices,
and through Play Store for Android
devices.Visit https://www.homewhiz.com/ ad-
dress for detailed information.
2.Quick Freezing Key
When you press the quick freezing key, the
LED on the key is illuminated and the quick
freezing function will be activated. Freezer
compartment temperature is set to -27
Celsius. Press the key again to cancel the
function. The quick freezing function will be
cancelled automatically. To freeze a large
amount of fresh food, press the quick
freezing key before placing the food in the
freezer compartment.
3. High temperature / fault alert
This indicator will be active when your refri-
gerator cannot perform adequate cooling
or in case of any sensor error. “E” will be
displayed on the freezer compartment tem-
perature indicator and figures such as
1,2,3... will be displayed on the cooler com-
partment temperature indicator. These fig-
ures on the indicator provide information to
the authorized service about the error that
has occurred. Exclamation mark may be
displayed when you load warm food to the
freezer compartment or keep the door open
for a long period of time. This is not a fault,
this warning is removed when the food is
cooled down or when any key is pressed.
4. Energy Saving (Display Off) Indicator
When the doors are not opened and closed
for an extended period of time, the energy
saving mode is automatically enabled and
the energy saving icon lights up. When you
activate the energy saving function, all sym-
bols other than the energy saving symbol
disappear on the screen. When the energy
saving function is active, if you press any
key or open the door of the product, the en-
ergy saving function of the refrigerator is
deactivated and the symbols on the screen
returns to normal. Energy saving function is
an active, factory installed function, it is not
possible to deactivate it.
5. The Freezer Compartment Temperat-
ure Setting Key
In order to set freezer compartment tem-
perature, press on this key. When you press
on this key, the freezer compartment tem-
perature can be set to
-18,-19,-20,-21,-22,-23,-24 Celsius values.
6. Cooler Compartment Off (Vacation)
Function Key
Press on the key for 3 seconds to activate
the vacation function. Vacation mode is ac-
tivated and the LED on the key is illumin-
ated. “- -” will be displayed on the Cooler
Compartment temperature indicator and
the cooler compartment does not actively
perform cooling. When you activate this
function, it is not suitable to store your food
in the cooler compartment. Other compart-
ments will continue to cool according to
their adjusted temperatures. Press the key
for 3 seconds again to cancel this function.