Grundig GV 900 SV/1 User manual

VIDEORECORDER
GV 900 SV/1
1
DEUTSCH
FRANÇAIS
ENGLISH
NEDERLANDS
ITALIANO

2
CONTENTS________________________________________________________________________
4 Videorecorder GV 900 SV/1
Special features of your video recorder
Contents of delivery
5 Installation and Safety
6 At a Glance
Front side of the video recorder
Rear side of the video recorder
The remote control
9 Connecting and Preparation
Connecting the aerial, TV set, satellite receiver, and mains cable
Switching the video recorder on and off (energy-saver mode)
Inserting batteries into the remote control
12 Settings
Adjusting the TV set to the video recorder
Channel programming with the automatic tuning system ATS euro plus
15 Playback
Basic playback functions
Additional playback functions
Index search
18 Recording
The three recording options
The video programme system (VPS/PDC)
Instant recording
Assembling recordings with clean joints
Selecting the audio track
Locating certain recordings using the Video Index Search System (VISS)
Programmed recording – by entering the ShowView number
Programmed recording– by entering the data for the desired TV programme
Checking, altering and clearing programmed recording data
Interrupting the recording standby mode of the video recorder
Re-activating the recording standby mode of the video recorder
27 Copying
from a second video recorder or a DVD player
28 Operation with a Satellite Receiver
30 Operation with a Decoder
2

CONTENTS__________________________________________________________________________________
31 Special Settings
Re-sorting TV channels manually
Clearing TV channels from the station table
Changing or entering station names
Channel programming with the manual tuning system or by entering
the channel numbers manually
Skipping TV channels
35 Setting the Time and Date
Updating the time and date automatically
Setting the time and date manually
36 Special Functions
Selecting the »MODE« menu
On-screen display on/off
Continous playback
Selecting the video recorder’s control address
Child lock
38 Remote Control of TV Sets
39 Fixing Faults Yourself
40 Technical Data
41 Help in the Case of a Defect
Grundig After-Sales Points
ENGLISH
3

4
SP/LP
TIMER/ V+
TIMER
ON/OFF
CLEAR
AUDIOMONITOR INDEX DUB
INFO RECORD
TV VIDEO 2
1 2 3
4 5 6
7 8 9
SV 0
OK
OK INFO
8
o
o
P
1
VIDEORECORDER
Special features of your video recorder
Three recording options
– Instant recording, i.e. you select the desired programme on the video recorder
and start recording immediately.
– Programmed recording at a later date with the help of the ShowView numbers.
– Programmed recording at a later date by entering the data for the desired
programme if you do not know the ShowView numbers.
High-speed drive
With this high-speed drive the fast rewind time of, for example, of an E-180
cassette is reduced to about 72 seconds.
GRUNDIG Megalogic
Three Megalogic options are available:
– Transfer of the TV channels to the recorder in the order programmed on the
TV set.
– Automatic selection of the AV programme position on the TV set when starting
playback on the video recorder.
– Instant recording of the currently running TV programme when starting
recording on the video recorder.
ShowView recording
Really easy programming of recordings. Select the desired programme from your
TV guide, enter the ShowView number indicated there, ready.
SAT video control
Socket for the timer control of a Grundig satellite receiver connected.
Contents of delivery
VIDEO RECORDER GV 900 SV/1_____________
1Video recorder GV 900 SV/1
2Remote control
32 batteries 1.5 V–, Mignon type
4RF (aerial) connection cable
5EURO-AV cable
6User manual
1
2 3
4 5
6

In order that you may enjoy this high-quality and comfortable video recorder for
a long time it is very important that you observe the following points when instal-
ling the recorder.
This video recorder is intended for the reception, recording and reproduction of
TV picture and sound signals.
Any other application is expressly prohibited.
If the recorder is exposed to drastic temperature changes, for example when
taking it from a cold to a warm place, connect the recorder to the mains supply
and let it stand at the new place for at least two hours without a cassette loaded.
The recorder is intended for use in dry rooms. If you wish to operate it in the open
air, make absolutely sure that it is protected against moisture (rain, splashes of
water). Do not expose the recorder or the cassette to any moisture.
Place the recorder on a flat and hard surface. Do not place any objects (e.g.
newspapers) on the recorder and no tablecloth or similar below the recorder.
Do not place the recorder in the immediate vicinity of a heat source or in direct
sunlight as this would prevent appropriate cooling. Keep the recorder away from
magnetic fields (e.g. loudspeakers).
Never insert any foreign objects into the cassette compartment. This might
damage the high-value mechanism.
Never open the recorder. Damage caused by unqualified work is not covered by
the manufacturer’s guarantee.
Do not place any object filled with water (vases and similar) on the recorder. The
object might fall over and the liquid spilling into the unit would impair its electrical
safety.
Thunderstorms are a danger for any electrical appliance. Even when switched
off, the recorder might be damaged by lightning striking the mains supply and/or
the aerial lead. During a thunderstorm you must always disconnect the mains and
aerial plugs.
For this video recorder, technology and ecology form a convincing overall idea.
Only ecologically high-grade materials are used. The packing consist of almost
100% recycled paper, its plastic parts have been reduced to a minimum. The
batteries supplied are free of mercury and cadmium. For environmental reasons
no buffer battery is used. To enable a high-grade recycling after use, the number
of plastic parts has consequently been reduced. All large plastic parts are
marked. To facilitate service and for optimum recycling, this device has been
designed in a specially disassembly-friendly and recycling-friendly way.
ENGLISH
5
INSTALLATION AND SAFETY_________________________
OK INFO
8
o
o
P
Krieg im Balkan
°C2h
°C
OK INFO
8
o
o
P
OK INFO
o
o
P
OK INFO
8
o
o
P
OK INFO
8
o
o
P
RF OUT
SORTIEANTENNE
ANTENNA IN
ENTREE ANTENNE
LINE1(I)IN/OUT
SON/VIDEO(L1/I)
LINE2(II)IN/DECODER
CANAL PLUS/L2(II)

6
Front side of the video recorder
AT A GLANCE________________________________________________________________
OK INFO
8
o
o
P
AASwitches the video recorder off.
NNEjects the cassette.
››OK Calls up data, confirms and saves settings.
››INFO Displays the menu, switches back to the TV picture.
**PSelects programmes downwards.
ÜÜPSelects programmes upwards.
●Starts recording.
rr During playback: reverse picture search;
after stop: fast rewind.
I I Pause during recording, freeze-frame during playback.
eStarts playback.
ee During playback: forward picture search;
after stop: fast forward wind.
■Switches the video recorder on;
ends all tape mechanism functions.

ENGLISH
7
RF OUT
SORTIE ANTENNE
ANTENNA IN
ENTREE ANTENNE
LINE1(I)IN/OUT
SON/VIDEO(L1/I)
LINE2(II)IN/DECODER
CANAL PLUS/L2(II)
ÜÜMains cable to mains supply socket.
}}SAT control socket for satellite receiver.
LINE 2 (II) IN/DECODER Euro/AV connector for external device.
LINE 1(I) IN/OUT Euro/AV connector for TV set.
ANTENNA IN Input socket for domestic aerial.
RF OUT RF output socket for aerial cable connection
with TV set.
Rear side of the video recorder
AT A GLANCE_____________________________________________________________________________

8
AT A GLANCE_____________________________________________________________________________
The remote control
On this page you will find a brief description of the important remote control
functions. Refer to the corresponding chapters of this manual for more infor-
mation on operation.
Direct the remote control at the video recorder.
88Switches the video recorder off (standby).
1 … 0 Numeric buttons for various entries ,
the » 0« button selects the »
A I «, » A 2 «programme
positions.
SV Initiates programmed recording with ShowView.
TIMER/V+
I I Pause in recording mode, freeze-frame in playback mode.
rr Reverse picture search during playback,
fast rewind after stop.
eStarts playback.
ee Forward picture search during playback,
fast forward after stop.
■Switches the video recorder on; ends all tape mechanism func-
tions and switches the video recorder to stop.
i INFO Switches to the menu and back to the TV picture.
● RECORD Starts recording.
CCDDSelect channels, » +« up, » –« down;
select various functions in the menus.
OK Calls up, confirms and stores data.
FFEEFinetuning;
select various functions in the menus.
TIMER Activates and de-activates programmed recording.
ON/OFF
SP/LP No function.
CLEAR Clears data, activates entries, resets the playing time display to
»
0:00:00 «.
MONITOR Switches the picture screen between TV picture and video recor-
der picture (monitor mode).
AUDIO No function.
INDEX Activates the INDEX search function.
DUB No function.
VIDEO 2 Switches to the video control address 2.
TV Swiches to TV control mode.
See page 38 for the possible functions.
SP/LP
TIMER/V+
TIMER
ON/OFF
CLEAR
AUDIOMONITOR INDEX DUB
INFO RECORD
TV VIDEO 2
1 2 3
4 5 6
789
SV 0
OK

ENGLISH
9
Notes:
If the TV set is equipped with the Megalogic function, the video recorder and
the TV set must be connected via the EURO-AV cable supplied, see point 3.
If you wish to connect a satellite receiver equipped with a SAT control socket to
the video recorder, this must be done before carrying out the settings. Start
with step 2of the example.
Connecting the aerial, TV set, satellite receiver and
mains cable
1Connect the aerial cable from the domestic aerial with the aerial socket
»ANTENNA IN« of the video recorder.
2Connect the aerial cable supplied with the »RF OUT« socket of the video
recorder and the aerial socket of the TV set.
3If the TV set is equipped with one or several EURO-AV sockets:
connect the EURO-AV cable supplied with the »LINE1(I) IN/OUT« socket
of the video recorder and the AV 1 socket of the TV set.
– The advantage of this connection is a better picture and sound quality
during playback.
CONNECTING AND PREPARATION _______
RF OUT
SORTIE ANTENNE
ANTENNA IN
ENTREE ANTENNE
LINE1(I)IN/OUT
SON/ VIDEO(L1/I)
LINE2(II)IN/DECODER
CANAL PLUS/ L2(II)
RF OUT
SORTIE ANTENNE
ANTENNA IN
ENTREE ANTENNE
LINE1(I)IN/OUT
SON/ VIDEO(L1/I)
LINE2(II)IN/DECODER
CANAL PLUS/ L2(II)
TV R
SAT
AV1 AV2
R
L
RF OUT
SORTIE ANTENNE
ANTENNA IN
ENTREE ANTENNE
LINE1(
I
)IN/OUT
SON/ VIDEO(L1/
I
)
LINE2(
II
)IN/DECODER
CANAL PLUS/ L2(
II
)
EURO AV VCREURO AV DECODEREURO AV TV
INPUT-SAT
220-240 V ~
50-60 Hz
TV
VIDEO CONTROL
1
3
4A
4B
4C
4D
4E
5
2

10
4If a satellite receiver equipped with a SAT control socket is connected to the
video recorder:
connect the »LINE 2 (II) IN/DECODER« socket of the video recorder and
the VCR socket of the satellite receiver via a commercially available EURO-AV
cable (connection 4A).
Connect the »}}« socket of the video recorder and the »VIDEO CONTROL«
socket (control line) of the satellite receiver via a commercially available Cinch
cable (connection 4B).
Connect the domestic aerial with the () aerial socket of the satellite receiver.
Connect the aerial cable from the satellite aerial with the corresponding aerial
socket (INPUT-SAT) of the satellite receiver (connection 4C).
Connect the »ANTENNA IN« socket of the video recorder with the cor-
responding socket (TV) of the satellite receiver via a commercially available
aerial cable (connection 4D).
Connect the EURO-AV socket (TV) of the satellite receiver with the AV2 socket
of the TV set via a commercially available EURO-AV cable (connection 4E).
Note:
It is possible to connect alternatevily a PAY-TV decoder to the »LINE 2 (II)
IN/DECODER« socket.
If a satellite receiver is already connected to this socket, use the decoder socket
on the satellite receiver for the connection of the decoder.
5Connect the mains cable with the mains supply socket.
– The video recorder is now in standby.
Attention:
The video recorder is isolated from the mains only when the mains cable is
disconnected from the mains supply socket.
CONNECTING AND PREPARATION_______________________________________
RF OUT
SORTIE ANTENNE
ANTENNA IN
ENTREE ANTENNE
LINE1(I)IN/OUT
SON/ VIDEO(L1/I)
LINE2(II)IN/DECODER
CANAL PLUS/ L2(II)

ENGLISH
11
Switching the video recorder on and off
(energy-saver mode)
1Switch the video recorder on with the »■« button.
2Switch the video recorder to standby with the »88« button.
– The video recorder is now in standby and the time is visible in the
display.
3Switch off with the »88« button.
– The video recorder is now switched off and the time indication goes out. The
power consumption falls below 2 W.
Note:
The video recorder cannot be switched off if recordings are programmed.
Inserting batteries into the remote control
1Press the catch and remove the cover from the battery compartment.
2Insert the batteries (Mignon type, e.g. UM-3 or AA, 2 x1.5 V). Observe the
polarity marks on the bottom of the battery compartment.
Note:
If your recorder no longer responds correctly to the remote control com-
mands, the batteries may be exhausted. Exhausted batteries must be remo-
ved.
The manufacturer cannot be held responsible for damage resulting from
battery leakage.
Environmental protection
The remote control batteries, even those containing no heavy metals, do not
belong in the household waste. Used batteries can be disposed of for recyc-
ling at most specialized dealers without paying a fee.
CONNECTING AND PREPARATION_______________________________________

12
SETTINGS____________________________________________________________________________
Adjusting the TV set to the video recorder
This adjustment is not necessary if the video recorder and the TV set are con-
nected with a EURO-AV cable.
Preparation
Switch the TV set on.
Select the »AV« programme position for video playback via the aerial socket.
Consult also the user manual of your TV set.
Note:
The video recorder must be in standby mode (not in the energy-saver mode).
Adjustment
1On the TV set in the UHF range between channel 21 and channel 69, search
for a “free“ channel on which no TV programme is received (only picture and
sound noise).
– Many TV sets display the channel number.
2Store the “free” channel number on the TV set.
– For this consult the user manual of the TV set.
3Press and hold down for about three seconds the »INFO« button on the video
recorder.
– »
CH 36 RF «, for example, is displayed on the video recorder.
4Using the »**PÜÜ« buttons, tune through the channels on the video recorder
until the picture from the recorder appears on the picture screen of the TV set.
5If the picture quality of the “recorder picture” is good, store the setting with the
»OK « button.
– The video recorder switches to standby.
Note:
If the quality of the “recorder picture” is poor, or the picture quality of one or
more TV programmes on the TV set gets worse, you must search a different
“free” channel on the TV set. For this, repeat the steps 1 to 5.

ENGLISH
13
SETTINGS ____________________________________________________________________________________
Channel programming with the automatic tuning
system ATS euro plus
The recorder has a built-in receiver. It can therefore receive and record television
programmes independently of the TV set.
For this, you must programme the TV channels on the video recorder.
When carrying out this function, the time is automatically updated, provided a TV
programme with teletext is received on programme position 1.
If the time has not been set automatically, it must be set manually as described in
the chapter “Setting the Time and Date” on page 35.
84 programme positions are available which can be assigned as desired to TV
channels received via the aerial, the cable system or a satellite receiver.
If a TV set equipped with the Megalogic functions is connnected to the video
recorder, the TV channels programmed on the TV set are automatically trans-
ferred to the video recorder when carrying out channel programming.
If a satellite receiver equipped with a SAT control socket is connected to the video
recorder, the channels programmed on the satellite receiver are transferred to the
station table of the video recorder.
Preparation
Switch the TV set on.
Select the »AV« programme position for video playback on the TV set.
Programming
1Press the » ■« button.
– The »AUTO INSTALLATION« table appears on the picture screen of the
TV set.
Help:
If the »AUTO INSTALLATION« table does not appear, press the » qP« and
»INFO« buttons on the video recorder at the same time until the table
appears.
2Initiate programming with the »OK« button.
– The »SPRACHE« (LANGUAGE) table appears on the picture screen.
3Use the » CCDDFFEE« buttons to select the desired language then confirm
with the »OK« button.
– The »COUNTRY« table appears on the picture screen.
AUTO INSTALLATION
PRESS OK KEY TO START.
AUTOMATISCHE EINSTELLUNG
ZUM START DIE OK-TASTE
DRÜCKEN.
OK :EINGABE INFO:ENDE
SPRACHE
ENGLISH ESPAÑOL
DEUTSCH SVENSKA
FRANÇAIS NEDERLANDS
ITALIANO PORTUGUESE
w q r e:WÄHLEN
OK :EINGABE INFO:ENDE

14
SETTINGS ____________________________________________________________________________________
4Select the country (place of installation) using the » CCDDFFEE« buttons.
If the country you require is not given in the table, select the »OTHERS« line.
Confirm your selection with the » OK « button.
5 A table asking you whether the aerial cable or the EURO-AV cable has been
connected to the video recorder appears.
Press »OK« to go to the next setting.
6The »SAT RECEIVER« table appears on the picture screen.
If no satellite receiver equipped with a SAT control socket is connected to the
video recorder, select the » SAT CONTROL OFF « setting using the »FF« or
»EE« button then continue with step 7.
If a satellite receiver equipped with a SAT control socket is connected, use the
»FF« or » EE« button to select the » SAT CONTROL ON « setting.
– A table asking you to connect the satellite to the video recorder appears on
the picture screen.
7 Press the »OK« button to start the automatic tuning system.
– The recorder searches all channel numbers for TV stations, then sorts and
stores them. This can take several minutes.
– When the search is completed, the table »MOVE« appears on the
picture screen.
Note:
You can sort the found TV channels to suit your taste.
If the order of the TV channels is already to your taste, continue with step 10 .
8Use the » CCDDFFEE« buttons to select the channel you wish to move then
mark it with the » OK « button.
9Use the » CCDDFFEE« buttons to move the marked channel to the desired
programme position then confirm with the »OK« button.
If you wish to sort further TV channels, repeat the steps 8 and 9 .
10 End the setting with the » i INFO« button.
Note:
Further settings such as manual channel search, changing the order of the
channels at a later date, clearing TV channels from the station table, or
assigning station names are described from page 31.
COUNTRY
A I
B N
DK P
FIN E
D S
NL CH
OTHERS
w q r e:SELECT
OK :ENTER INFO:EXIT
SAT RECEIVER
SAT CONTROL ON OFF
r e :CHANGE
OK :ENTER INFO:EXIT
1 C 02
AUTOMATIC SORTING.
PLEASE WAIT.
. . . . . . . . . . . . . . . . . . . . . . .
INFO:EXIT
MOVE 1/5
1ARD 17C23 13
2ZDF 18C24 14
3RTL1 19C31 15
4RTL2 10C47 16
5SAT1 11 17
6PRO7 12 18
w q r e:SELECT
OK :ENTER INFO:EXIT

ENGLISH
15
PLAYBACK_________________________________________________________________________
Basic playback functions
Preparation
Switch the TV set on.
Select the »AV« programme position for video playback on the TV set.
Insert a recorded cassette with its window up into the cassette compartment until it
is automatically pulled in.
– The cassette symbol »z« appears in the display of the recorder.
1Start playback with the » e« button.
– The tape length indication and briefly after this the remaining playing time
indication appear on the picture screen.
Note:
If the video recorder is connected to a TV set equipped with the Megalogic
functions, the TV set switches on from standby and selects the »AV« pro-
gramme position automatically after starting playback.
2Use the »II« button to switch to *Freeze-frame/Pause.
Press repeatedly to advance the freeze-frame step by step.
3Press the »rr«button during playback to select the reverse picture search
function.
Press the »ee«button during playback to select the forward picture search
function.
Press repeatedly to select different playback speeds.
4End playback with the »■« button.
5Select fast rewind with the »rr«, fast forward wind with the »ee« button.
6Press the »
.
« button on the video recorder to eject the cassette.
Notes:
If a cassette which is not erase-protected is inserted into the video recorder,
plaback is started automatically.
You can change the video recorder’s display mode with the »OK« button:
tape length, remaining playing time (»R«), and time of day.
Pressing the »CLEAR« button resets the tape length indication to»
0:00:00 «.
* Freeze-frame picture with disturbance lines.
OK INFO
8
o
o
P
SP/LP
TIMER/ V+
TIMER
ON/OFF
CLEAR
AUDIOMONITOR INDEX DUB
INFO RECORD
TV VIDEO 2
31 2
64 5
97 8
0SV
OK

16
Additional playback functions
Double playback speed
1Press the » e« button during playback.
2Press the » e« button once again to return to normal playback.
Slow motion
1During freeze-frame (playback-pause): press the » III « button a longer time.
– Brief display on the video recorder: » SLOW«
2Press the » e« button to return to normal playback.
Advancing freeze-frames step by step
1During freeze-frame (playback-pause): repeatedly press the » II « button.
– Brief display on the video recorder: » STILL«
2Press the » e« button to return to normal playback.
Improving the picture of a freeze-frame
If the picture jitters or appears uneven during the freeze-frame function, it can be
optimized:
1During the freeze-frame function (playback-pause), use the » CC« or » DD«
button to adjust the picture to suit your personal taste.
2Press the » e« button to return to normal playback.
Correcting picture interference (track adjustment)
1During playback, use the » CC« or » DD« button to adjust the picture to suit
your personal taste.
– This setting is maintained until the cassette is removed.
2If you press the » **PÜÜ« buttons on the video recorder at the same time, the
»AUTOTRACKING« function is activated.
Automatic picture improvement (ACC Plus)
„Cassettes recorded on another video recorder may have a poor picture and/or
sound quality. This is not a fault of your recorder!
1Press the »OK« button on the video recorder during playback. The automatic
picture improvement function (ACC Plus) optimizes the picture.
Note:
The freeze-frame and picture search functions are automatically switched off
after a certain time.
PLAYBACK __________________________________________________________________________________
P
o
o
OK

ENGLISH
17
PLAYBACK __________________________________________________________________________________
Playing back NTSC colour recordings
When playing back NTSC recordings, the recorder switches automatically to this
system.
Note:
During NTSC playback, no freeze-frame function is possible.
Index search
This search system enables the automatic return to the tape position » 0:00:00 «.
Preparation
Switch the TV set on.
Select the »AV« programme position for video playback on the TV set.
Insert the desired cassette.
Control
1Start playback with the »e« button.
2Select the tape indication with the » OK« button.
3At the desired tape position, press the » CLEAR« button to reset the tape indi-
cation to » 0:00:00 «.
4To return to the marked tape position, press the » INDEX « button and then
the » 0« button.
– The tape is rewound to the marked position (index).

18
RECORDING____________________________________________________________________
The three recording options
With your video recorder you may record programmes in three different ways:
1Right away, that is you select the desired programme on the video recorder
then start recording.
2At a later time using the ShowView number.
3At a later time by entering the data of the desired TV programme if you do not
know the ShowView numbers.
For the recording modes 2 and 3, you can enter the recording data for
eight different broadcasts over a period of one year or for dayly or weekly
recordings at the same time. Your favourite broadcasts will automatically be
recorded via the Video Programme System (VPS) which is controlled by the TV
broadcasters.
The video programme system (VPS/PDC)
If your programmed recordings are controlled via this system, the desired
programme will always completely be recorded.
Notes on the video programme system
Many TV stations broadcast an additional programme-related (VPS/PDC) signal
which indicates the start and duration of each individual TV programme. It is
therefore important when programming the recorder to enter the switch-on and
switch-off times to the exact minute.
If TV programmes are altered or moved, special VPS/PDC times are indicated in
the programme guides. They must be entered instead of the normal starting times.
TV programmes without VPS/PDC signal
With TV stations that do not transmit a VPS/PDC signal, recording is only started
by the switch-on time and only ended by the switch-off time.
This does not depend on whether the VPS/PDC signal is confirmed or cleared
when programming recordings.
Programming several TV programmes on one day
If you wish to record several TV programmes on one day, you must decide which
one is to be recorded completely if there is a risk of alterations to timing.
TV programmes from a satellite receiver with aerial
positioner
When programming recordings of TV programmes from different satellites, the
VPS signal is to be programmed for one aerial position only as otherwise the
motor of the aerial positioner could be overloaded.

ENGLISH
19
RECORDING _______________________________________________________________________________
Instant recording
Preparation
Switch the TV set on.
Select the »AV« programme position for video playback on the TV set.
Insert a cassette with sufficient playing time and intact erase tab (cassette not
erase-protected) into the cassette compartment until it is fully pulled in.
– The cassette symbol » z« appears in the recorder’s display.
Control
1Before starting recording, select the desired channel with the »CCDD« or
»**PÜÜ« or »0…9« buttons.
Note:
If a TV set equipped with the Megalogic functions is connected to the recorder,
the TV programme currently visible on the picture screen can be recorded by
pressing the »●RECORD« button. In this case it is not necessary to select the
programme position on the video recorder.
2Start recording by a longer pressure on the »●RECORD« button.
Press repeatedly to enter a switch-off time in steps of 10 minutes.
3Select recording-pause with the »II« button.
4End the recording with the »■« button.
5Fast rewind with the »rr«, fast forward wind with the »ee« button.
6Press the »
.
« button on the video recorder to eject the cassette.
Note:
The tape length indicator can be set to » 0:00:00 « by pressing the
»CLEAR« button.
OK INFO
8
o
o
P
SP/LP
TIMER/ V+
TIMER
ON/OFF
CLEAR
AUDIOMONITOR INDEX DUB
INFO RECORD
TV VIDEO 2
31 2
64 5
97 8
0SV
OK

20
RECORDING _______________________________________________________________________________
Assembling recordings with clean joints
With this function you will have no disturbing transitions between the individual
recordings during playback.
1During playback, locate the end of the picture scene at which you wish to join
the new recording. Press the »II« button at this tape position.
2Switch the recorder to recording-pause using the »●RECORD« button.
3Enter the desired programme position number with one or two digits using the
»0 ... 9« buttons then start the new recording with the »●RECORD« button.
4End the recording with the »■« button.
Locating certain recordings using the Video Index
Search System (VISS)
With this system you may find the beginning of every recording in a precise and
fast way. The “marks” required for this are automatically placed at the beginning
of each recording.
Preparation
Switch the TV set on.
Select the »AV« programme position for video playback on the TV set.
Insert a cassette.
Control
1Press the » INDEX « button.
2Repeatedly press the » rr « or » ee« button to enter the index number of
the desired recording (max. 19).
– The tape is wound to the selected recording and playback is started there.