GuardTronic GTWAE7-4D User manual

Home security alarm system GTWAE7-4D
Instruction
Brief introduction
GTWAE7-4D ( LX-HS06) is a set of entirely new English home security alarm
system, it uses advanced MCU control and SMD technology. it innovate multiple
trade new technique. It has integration high, relia ility good, technology
advanced, function mightiness and operation simple etc. feature. It used a road
in ank, organ, enterprise, army, villa Dom, and small zone housing network
alarm.
Technical parameter
Main controller:
Power:12VDC(power adapter convert)
Stand y power: DC12V(chargea le attery)
Working frequency: 433MHz
Remote control distance:≥30m
Static current: 150mA
Battery group waiting time: 90min
Factory setting:
System password:000000 System delay:0sec
User password: 1234 Alert: 300sec
Code: 0000 Dial times: 3
Report: no report Vi rant ring times: 8
Sensor emitter LX-AL8:
Working power: DC9V(cascading attery) Static current: 30μA
Sense distance: 12m Sense angle:110°
Installing height:2m
emote controller: Working power: DC12V (alkaline attery)
Door magnetism (LX-DM1): Working power: DC12V (alkaline attery)
Siren: power DC12V, current: <800mA
Basis configuration
Option unit
Smoke alarm GTWAE7-4D (LX98-RF、LX728-RF) 、wired sensor（glass reak LX-AL5、PIR LX-AL6, PIR &glass reak LX-AL7, dou le
detectors PIR LX-AL11）、wired or wireless PIR LX-AL9!
Function
4+8 arm zone
LX-HS06 has 4 wired arm zones and 8 wireless arm zones.
English display
Its operation and setting all e displayed y English and operation is more convenient and shortcut.
Function mightiness
Possessing multiple programma le function setting, operation and setting is simple, stand y power for 24 hours.
One key operation
You need only press [AWAY] or [HOME] key to set arm/stay, you can also use remote controller to arm/disarm. Under any
state disarming need only pressing user password.
Numeral speech
Inner set numeral speech ware, and has 8 section numeral speeches. During operation, it prompt:” System arm”, “system
disarm”; during alarming, it can identify detector automatically and transmit alarm info to receiving alarm telephone, like
“ fire alarm”, “ gas alarm”, “ security alarm”, “help alarm”.
Password popedom
It has [system password] and [user password], the two passwords can e set after entering alarm system ut respective
function popedom is different, that is convenient for manager and operator to control alarm system religiously.
controlle
r
（
DC12V storage attery group
include
）
1pcs
Power adapter
(
Input
230VAC,output 12VDC,current 1000mA)
1pcs
4
-
key remote controller
（
attery
include
）
2pcs
single
-
key remote controller
（
attery
include
）
1pcs
Sensor emitterLX
-
AL8
（
attery
include
）
1pcs
Door
magnetismLX
-
DM1
（
attery
include
）
2pcs
Siren
1pcs
Telephone line
1pcs

Long-distance remote control
The alarm can e controlled y keypad and remote controller, y telephone line, it can e long-distance controlled, and
fulfill arm/disarm/monitor hearing function.
Intelligent study.
Wireless detector study is very simple. The study time need no 1sec.
Connection line
1. connect phone line: connect controller to worka le phone path. NOTE: if not connect phone line, controller will give"path
trou le"prompt.
2. Connect power adapter: the adapter requires: input 230VAC, output 12VDC, and current 1000mA. During AC power is on,
stand y attery will e charged automatically. When AC power cut off, the product works y stand y attery entirely.
3. conncetion terminal:
·power output terminal[terminal 1（+）、2（-）]
output DC12V power, can power supply for LX-AL6.
·siren terminal[terminal 3（-）、4（+）]
siren power:DC12V, current:800mA
·detector signal terminal[terminal5（6，7，8）、GND(2,3)]
controller has ４wired arm zone:［５－GND］is 01 zone；［６－GND］is02 zone；［７－GND］is 03 zone；［８－GND］is 04 zone.
Function setting
·
··
· enter programming
The controller’s system password is [000000], all settings and
modifying of the controller must e done via system password. The user
password is [1234].
Attention: the system password is the highest grade; only via it you
can modify the user password and all specification of the controller. So
when you modify the system password, you must remem er the new
password firmly.
After connection line right, switch on power, the POWER led light;
when the controller is in arm state or guard st, the ARM led light. LCD
display the controller’s state(“Arm St” or “Guard St” or “Disarm St”)，that indicate it is normal.
Attention: when LCD display “Arm St” or “Guard St”, if you need to program, you need to input user password to disarm
controller, when LCD display “Disarm St”, you can start to program.
When controller is in disarm state (disarm st), press the SET key on keypad, LCD display <input level> and remind you input
the system password, press # key to enter the main menu.
POWER
ARM
A B C
0 #
8 TUV
9 WXYZ
4 GHI
5 JKL 6 MNO
3 DEF
2 ABC
1
AWAY
HOME
SET
MEDICAL FIRE HELP
7 PQRS
Disarm St
Input level
******
1.Sys 2.Zone
3.Setup 4.Study
siren
controller inner PCB
phone line
13ON PULSELED OFF
-4
-6
0
4
2
-2
TAMPER
+
_
RELAY
LX-AL6 inner PCB
_12VDC+
power output
power adapter
TAMPER RELAY

1.Level
2.Code
3.Report
4.Delay
01
02
03
04
05
…
12
1. Instant
2. Delay (zone)
3. 24 HR
4.Bypass
1. Alert
2. Home
3. Call
4. Del home
1. Tele 1
2. Tele 2
3. Tele 3
4. Tele 4
·
··
· function menu
Arm state
1. Sys
2. Zone
Disarm state
3. Setup
4. Study
Guard state
NOTE: when programming, the [*] key is for returning to previous menu, and [#] key is for confirming.
•
••
• system setting1.sys
—Password modifying 1. level
1> modify system password<sys level>
enter menu 1.level→1.sys level→LCD display “input sys level”, input 6- it password and press # key to confirm. The system
save only the last password, please remem er new password firmly!
2> modify user password<user level>
enter menu 1.level→2. user level→LCD display “input user level”, input 4- it password and press # key to confirm. The system
save only the last password, please remem er new password firmly!
—code setting<center network code> 2. code no the setting temporarily.
—report setting3.report
Enter menu 3. report→LCD display:
Selecting 1 is report to center, selecting 2 is no report.
1.Arm report
2.No report
1.Smoke
2.Gas
3.Panic
1.Tel
2.Dial
3.Vi rant ring
1.Remote
2.Arm zone
3.Del
Wired
Wireless
1.Sys level
2.User level
Input sys level
******
Input user level
****
1． Arm report
2． No report
1.level 2. code
3.report 4.delay
1.Sys 2.Zone
3.Setup 4.Study
Press 1

Attention: when need saving telephone expense or the alarm needn’t e network, you can not set it.
—delay <system delay> 4.delay
Enter menu 4. relay→LCD display:
After inputting press # key to confirm.** is delay time for away home when arming, it can set to 00~99sec.
·
··
· arm zone setting 2.zone
Enter menu 2. zone→LCD display:
** is 01~12 arm zone, after inputting press # key to confirm, and then according to your need select [instant], [delay], [24 hours],
[ ypass] arm zone type.
When select [1.instant]，after it receive signal, the controller will dial and alarm immediately, and the corresponding alarm
information is “security alarm”;
When select [2.delay]，after it receive signal, the controller dial and alarm after some time, and the corresponding alarm
information is “security alarm”;
after select[ 3.24Hr], according to your need select [1.smoke]，[2.gas]，[3.panic]，the corresponding alarm information are"fire
alarm″，"gas alarm″，"help alarm″separately.
When select [ 4. ypass], the arm zone do not work.
·
··
· setting 3.setup
—siren alarm time setting1. alert
enter menu 1.alert→LCD display:
After inputting press # key to confirm,*** is siren’s alarm delay, can set to 000~999sec, factory set to 300sec.
—guard setting2. home
enter menu 2.home→LCD display:
After inputting press # key to confirm,** is the arm zone NO. guarded. When host is at home, after home arm, the system will
ignore the guarded detector (for example: PIR sensor). So host can move freely indoor and not arising alarming.
—telephone setting
enter menu3.call→1.tel→LCD display:
1 group is network center num er, when no network, you can not set the num er;
2,3,4 group is speech alarm telephone num er. If you need to delete the num er, only set the num er to [0]. select the telephone
group No.(1-4),LCD display:
Input delay
**
Input arm zone:
**
1.instant 2.delay
3.24Hr 4.bypass
1.Smoke 2.gas
3. Panic
Set alarm time
***
Set arm zone NO.
**
1.tel 2.tel
3.tel 4.tel
Input tel NO.
*************
1.Sys 2.Zone
3.Setup 4.Study
Press 2
2.Zone
1.Sys 2.Zone
3.Setup 4.Study
Press 3
1.alert 2.home
3.call 4.del home

*************is telephone num er, it can set to 3~13 its telephone num er.
—dialing setting
enter menu3.call→2.dial→LCD display:
press # key to confirm ,** is dial times. Factory set is 3 times; network center is not limited y it until center telephone receiving
alarm.
—vi rant ring setting
enter menu3.call→3. vi rant ring →LCD display:
press # key to confirm , ** is long-distance controlling vi rant ring times, can set to 01~99 times, factory set is 8 times.
—delete home4.del home
Delete guarded arm zone, if use the stay function next time, you need reset it.
• study 4.study
—study wireless(1.remote, 2.arm zone)
Setting: ** + #
Attention: ** is remote controller NO. or arm zone NO., remote controller [1~4], and arm zone [05~12]. Select the remote
controller NO. Or arm zone NO. needing study, and press # key to confirm, when LCD display“e studying”,trigger remote
controller or detector once, and then study next one.
—delete wireless(3.del)
Delete wireless remote controller or wireless detectors.
Function operation
•
••
• arm, disarm
Arm: press the [Away arm] key or the [AWAY] key on keypad, controller give “system arm”
prompt sound and LCD displays “arm st”;
Disarm: press the [Disarm] key or press user password on keypad, controller give “system
disarm” prompt sound and LCD displays “disarm st”;
Home Arm: press the [Home arm] or press [HOME] key on keypad, controller give “system
arm” prompt sound and LCD displays “guard st”.
•
••
• help alarm
Remote control: press the [help alarm] key on remote controller,
controller dial and then the siren alarm, controller give “help
alarm” alarm info.
Keypad operation: press and hold MEDICAL/FIRE/HELP key for 3sec( “DI-DIDI” prompt sound will e
heard), controller dial and then the siren alarm, controller separately give” medical alarm, “ fire
alarm” “ help alarm” alarm info.
•
••
• keypad operation
AWAY: AWAY arm key
HOME: HOME arm key
SET: programming setting, [*]: return to the previous menu when programming.
[#]: Programming confirm key. Key is useless.
•
••
• speech receiving alarm
When alarm telephone is called, pick up telephone hear alarm info. And then press “#” key to confirm and ring off, the controller
stop dialing the telephone num er; Otherwise it dial alarm telephone according to dial times pre-set.
•
••
• long-distance control
By long-distance telephone or hand call dial the telephone connected with controller. After vi rant ring for the times preset and
telephone prompt “ input password, press 1 to arm, press 2 to disarm”, input operation password, press # key, enter long-distance
control: press 1 to arm, press 2 to disarm, press 3 to monitor hearing, press 4 to ring off.
help alarm
disarm
home arm
away arm
Set dial times
**
Input ring times
**
1.Sys 2.Zone
3.Setup 4.Study
1.remote 2.arm zone
3.del
Press 4
help alarm

Installing
1．Untighten the screw to open the unit (see fig.1);
2．Pull in wires through the out-line hole on ottom cover and then connect wire to terminals on PCB according to connection
line diagram.
3．Fixing the ottom cover on needed position( see fig.2)
4．Link up front cover and tighten the screws(see fig.3)
Sensor emitter X-A 8
—
——
—Jumper setting (like right figure)
·Sense once to emit: after sensing once,
the sensor emit signal
·Sense twice to emit: after sensing twice,
the sensor emit signal , This setting
enhance its preventing false-alarm and
preventing-pet function.
Note: the emit interval time is at least
15sec.that means: sense to make it emit,
after at least 15sec sense it a ain, it will emit a ain.
—
——
—Test
·press the arm key of remote controller or main controller, set the controller to arm.
·set the jumper on needed position;
·install 9V attery, and install the unit on selected position;
·turn on power switch to switch on power, after 60s the sensor enter sta le working state;
·according to the studying wireless method select study arm zone(2.arm zone) to study LX-AL8;
·move along the tangent of the lens, the sense LED light and then it emit signal to controller, the emission LED light. the siren give
alarm and the controller dial.
—
——
—Attention
· Low- attery LED: When attery energy is elow 7V, the low- attery LED will flash once a second and remind you replace attery.
· Avoid installing the unit on metal ase;
· Avoid installing the unit where sun shine or temperature change o viously, for example: air conditioning, heater etc.
Door magnetism X-DM1
· Install magnetism and emitter on upright position of door lock, the distance etween them is 3mm~5mm and triangle on emitter
aim at triangle on magnetism(like right figure);
·install DC12V attery into emitter and then close the attery lid;
·according to the studying wireless method select study arm zone(2.arm zone) to study LX-DM1;
·press the arm key of remote controller or main controller, set the controller to arm.
·Open door, the emitter is triggered and its LED light, then emit signal to controller, the siren
alarm and the controller dial；
·tamper design: Under the condition that the triangle on emitter aim at triangle on magnetism,
when the attery lid is removed, it will emit signal to controller.
·Attention:
1 ．
．．
． Avoid installing the unit on metal ase;
2 ．
．．
． The magnetism should e on the left of the emitter
(like following figure)
Warnning: No slide all numerals of the DIP switch to ON position simultaneously when coding!
Incorrect position
Correct position
D o o r
D o o r fra m e
D o o r lo c k
AUTO
DIPswitch SenseLED
Powerswitch
PIR
Jumper
AUTO / 1 AUTO / 1
1
Emit LED
Sense
onceto
emit
Sense
twiceto
emit
Low-batteryLED
78
160
out-line hole
Fig. 1
Fig. 2
Fig. 3