Guardzilla 360 Outdoor User manual

FACTORY RE-SETTING AND
POWER CYCLING
YOUR GUARDZILLA CAMERA
______________________________________________________________
Guardzilla 360 Outdoor
This guide describes how to:
1) Factory reset your camera; and 2) Power cycle your camera.
Power cycling your camera will retain all your settings. It’s a good first step if you are experiencing issues
with your camera. A factory reset of your camera will remove all of your camera’s settings and will require
you to set up your camera all over again.
______________________________________________________________
FACTORY RE-SETTING YOUR CAMERA
1Make sure that your camera is on. IF the status LED light on the top of the camera is off, press the
power button to activate the camera.
.2Locate the power button on the side of the camera.
.3Press down and hold the power button while watching the LED light on the top of the camera until it
begins to blink red and blue, then release the button. Your camera will now go through the factory reset
process. In a few seconds the camera will announce that “Guardzilla 360 is initialized”. Your camera is
reset and can now be added back onto your network (see STEP 4 below), if desired.

.4To add your camera back onto your new network follow these steps:
STEP 1. On the upper right hand corner of your Guardzilla app’s home screen press the blue plus (+) sign.
STEP 2. A carousel of product images will appear. Swipe your finger on the product images until the
360oOutdoor Live Video Security Camera image and title appears, then select Next and follow the
directions for adding a camera back to your system. See “Adding a Camera” in the Customer Support
area of the Guardzilla.com website for detailed directions.
POWER CYCLING/ YOUR CAMERA
To re-start/power cycle your Guardzilla 360 Outdoor camera push the power button in and hold for 3
seconds, then release. Wait a couple of seconds then press the power button again to turn the camera back
on. Wait for the camera to re-start, then resume normal operations.