guide craft Kiddie Rocker G6400 User manual

For ages 3 and up. Adult assembly required.
! WARNING
Small parts and sharp points may be present
prior to assembly.
Care Instructions
To clean your product, use mild soap and
water on a damp cloth. Do not use window
cleaners or cleaning abrasives as they will
scratch the surface and could damage the
protective coating.
Customer Service
For questions regarding this product, or to
receive replacement or missing parts,
contact Customer Service at [phone].
Please have the model number and part
number(s) located in this Assembly
Instruction sheet available for reference.
Limited Warranty
All Guidecraft products are warranted to
the original purchaser at the time of
purchase and for a period of one (1)
year thereafter. In order to provide you
with timely assistance, please
thoroughly inspect your product for
missing or defective parts immediately
after opening the carton. To receive
replacement or missing parts under this
warranty, contact Customer Service.
You will also need your sales receipt or
other proof of purchase.
G6400, 6406
Kiddie Rocker Chair Set
Assembly Instructions
A(8)
E
3"
(84mm)
Guidecraft • 55509 Highway 19 West, Winthrop, MN 55396 • [phone] • www.guidecraft.com
Hardware and Parts
2.2"
(55mm)
B(8) C(8)
D(8)
1.2"
(33mm)

Kiddie Rocker Table Assembly
Kiddie Rocker Assembly
D
DD
D
D
D
D
STEP 1 STEP 2
STEP 3
Ensure the holes in the fabric
cover line up with the holes
in the metal frame after the
cover is attached. If the holes
do not line up, you may have
installed the cover upside
down.
BURN HOLES IN COVER
Please note:The holes in the
cover are burned at the
edges to prevent fraying.
They are not a product flaw.

Kiddie Rocker Assembly
A
A
C
C
C
C
A
A
B
B
BB
STEP 1
STEP 2
STEP 3