Vivo DESK-M55TB User manual

Crank 55” x 24” Height Adjustable Desk
Follow along step-by-step with our video walk through by scanning
the QR code with your mobile device or by following the product
link: vivo-us.com/products/desk-m55tb
Instruction Manual
SKU: DESK-M55TB
ASSEMBLY VIDEO AVAILABLE:
[email protected]om www.vivo-us.com 309-278-5303

Contact Us First!
PERSONABLE CUSTOMER SUPPORT
Our friendly product support team is here to help!
DO NOT RETURN ITEM
We’re Here for You!
Missing a Part?
Our customer-minded support team is here for YOU,
Monday-Friday 7am-7pm CST.
We oer immediate assistance with rapid response times
from customer service agents and product techncians to
help you every step of the way!
Monday-Friday
Chat Us:
www.vivo-us.com
Give us a Call:
309-278-5303
Email Us:
[email protected]om
If any parts are received damaged / defective OR you are
missing a part, please reach out to us within 30 days of
product delivery to have it replaced at no cost.
We are happy to replace parts to ensure you have a fully
functioning product
7AM - 7PM

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a qualied
technician. Check carefully to make sure there are no missing
or defective parts. Improper installation may cause damage or
serious injury. Do not use this product for any purpose that is
not explicitly specied in this manual. Do not exceed weight capacity. We
cannot be liable for damage or injury caused by improper mounting, incorrect
assembly or inappropriate use.
PRE-ASSEMBLY | BEFORE YOU BEGIN
Product Warranty
Returns | Product Didn’t Work Out?
For the most up to date details on your product’s warranty, please visit
the product’s listing on our website or reach out to customer support.
vivo-us.com/products/desk-m55tb
We oer a hassle-free 30 day return on all products. Contact customer
support at 309-278-5303 or [email protected]om. Please note: For items
ordered in error or no longer needed, the return shipping charges will
be at the buyer’s expense.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS
REQUIRED.
WEIGHT CAPACITY
DO NOT EXCEED WEIGHT CAPACITY. Failure to do so may result in serious injury.
88lbs
(40kg)
!
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC
SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
• DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
• DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
• NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR
SELLER TO REPLACE DAMAGED PARTS.
• NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE
MADE CONTACT WITH LIQUIDS.
• ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
• OUTDOOR USE IS PROHIBITED.
ELECTRICAL WARNING :

4
PACKAGE CONTENTS
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
A (x2)
Liing
Column
B(x1)
Sync Rod C(x1)
Upper
Crossbar
D (x1)
Lower
Crossbar
S-A (x4)
M6x12mm Screw
S-B (x4)
M6x35mm Screw
S-C (x4)
M5x60mm Screw
Please consult the parts list below and ensure you have everything you need to assemble
your product. If parts are missing or damaged, please contact us.
Phillips Screwdriver
|
TOOLS NEEDED:
DIFFICULTY LEVEL
E (x1)
Desktop
F (x1)
Crank
S-D (x9)
Pad
S-E (x6)
M6 Washer
T-A (x1)
Allen Wrench
Drill Level

5
STEP 1: Install Sync Rod
ASSEMBLY STEPS
Stand up Liing Columns (A) and insert Sync Rod (B) into the socket on each column. Use
Crank (F) to align columns if needed.
STEP 2: Assemble Upper Crossbar
Assemble Upper Crossbar (C) to the top of the columns using the M5x60mm Screws (S-C) and
Lower Crossbar (D) to the back using M6x12mm Screws (S-A). Tighten all screws using Allen
Wrench (T-A).
T-A
A
Liing Column
B
Sync Rod
F
Crank
C
Upper
Crossbar
D
Lower
Crossbar
S-A
M6x12mm Screw
S-C
M5x60mm Screw
T-A
Allen Wrench

6
STEP 3: Place Pads
Remove adhesive backing from Pads (S-D) and place them on top of the assembled frame.
STEP 4: Mount the Desktop
Place Desktop (E) on top of the frame. Secure using the M6x35mm Screws (S-B) with M6
Washers (S-E), and tighten with a Phillips screwdriver.
S-D
Pad
S-B
M6x35mm Screw
E
Desktop
S-E
M6 Washer

7
STEP 5: Leveling the Frame
Insert Crank (F) into the hex socket of the liing column.
Figure 1: Turn the crank to raise or lower
the desk.
Figure 2: Store the crank in the rear of
the desk support bracket on the column as
shown.
Figure 3: Turn the foot pads to adjust the
desk level.
Figure 4: Use a bubble level to ensure the
desk is sitting perfectly level.
F
Crank

8
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
Do not exceed desk weight limit. Keep area of vertical motion free of
obstacles.
Keep weight on desk balanced for
correct operation and longer life of
components.
Leave enough slack in cables to
allow for full range of vertical
motion.

9

10
3
CHECK OUT OTHER GREAT PRODUCTS FROM
EXPLORE MORE AT VIVO-US.COM
We oer a wide array of home & oice products
to fit your needs. From height adjustable desks to
monitor mounts to keyboard trays and more!
MONITOR
MOUNTS
SPEAKER MOUNTS
& STANDS
From single monitor
mounts to hex mount,
gromment or clamp-ons,
we’ve got a mounting
solution for your setup.
Whether you’re mounting
a soundbar or surround
sound system, we’ve got
a mounting solution to fit
your needs
CABLE
MANAGEMENT
From single monitor
mounts to hex mount,
gromment or clamp-ons,
we’ve got a mounting
solution for your setup.