Guide TN Series User manual

1
GB CN DE FR RU
Thank you for choosing our product. Please thoroughly go through user
manual before operation and keep it well for future reference. All photos
here are for reference only. and specifications are subject to the physical
product.
V1.0 202106
Quickstart Guide
TN Series Thermal Imaging Cameras

- CONTENT -
GB TN Series Thermal Imaging Cameras
Quickstart Guide.................................................. 1-19
CN TN系列热成像仪快速操作指南.............................. 21-35
DE TN-Serie Wärmebildkameras
Kurzbedienungsanleitung ................................. 37-57
FR Manuel d'utilisation rapide de
la caméra thermique série TN............................ 59-79
RU Тепловизоры серии TN
Инструкция по быстрой эксплуатации ......... 81-102

1
GB CN DE FR RU
- IMPORTANT -
Thank you for purchasing this product. Please read this
Guide first and keep it properly for future reference. We hope
this product will meet your expectations.
This Guide is a general guide for a series of products, which
means that the product you receive may dier from the
description in the Guide. The actual product you receive
shall prevail.
This Guide is prepared to introduce our products to the users.
We will try our best to ensure the accuracy of the Guide, but
the completeness of the Guide still cannot be guaranteed,
because our products have been continuously upgraded. We
reserve the right to modify at any time without prior notice.
- FCC WARNING -
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,and (2)
this device must accept any interference received, including
interference that may cause undesired operation.

2
GB CN DE FR RU
- IMPORTANT -
DANGER
1) Please follow the method described in this Guide
for charging the cell, and follow the charging
procedures and precautions. Improper charging
may cause overheating, damage and even
personal injury.
2) Do not attempt to open or disassemble the cell
at any time.If any liquid touches the eyes in case
of cell leakage, please rinse with clean water
immediately and seek medical care.
WARNING
1) Please keep the device as stable as possible to
avoid violent shaking.
2) Do not use or store the device in an environment
with the temperature higher than the permitted
level.
3) Do not direct the device directly to high-intensity
heat radiation source, such as the sun, laser, spot
welding machine, etc..
4) Do not block the holes on the device.
5) Do not knock, throw or vibrate the device and
accessories to avoid damage.

3
GB CN DE FR RU
6) Do not disassemble the unit by yourself, which
may cause damage to the device and loss of
warranty rights.
7) Do not use soluble or similar liquid on the device
and cables, which may cause damage to the
device.
8) Please do not use the device in an environment
with the temperature higher than the permitted
level, which may cause damage to the device.
9) Please observe the following rules when wiping
this device:
· Non-optical surface: if necessary, use a clean
and soft cloth to wipe the non-optical surface
of the thermal imaging camera.
· Optical surface: avoid soiling the optical
surface of the lens when using the thermal
imaging camera, and especially avoid
touching the lens with your hand, because
the optical coating on the glass surface may
be corroded due to sweat on the hands. When
the optical lens surface is contaminated, use
a professional lens cloth to carefully clean it.
10) Do not put the cell in a high temperature
environment or near high-temperature objects.

4
GB CN DE FR RU
11) Do not short-circuit the positive and negative
terminals of the cell;
12) Do not place the cell in a humid environment or
the water.
NOTES
1) Do not expose the device to dust or moisture.
When used in an environment with water, avoid
splashing water on the device. The lens shall be
covered when the device is not in use;
2) When this device is not used, please place the
device and all accessories in the special packing
box.

5
GB CN DE FR RU
- LIST OF PARTS -
Options：
TYPE-C CABLE
MICRO HDMI CABLEPOWER ADAPTER
PLUG
REMOTE CONTROL
18650 CHARGER 18650 BATTERY
X2 (INCLUDING
BATTERY BOX)
SHOULDER STRAP
BAG (INCLUDING
SHOULDER STRAP)
MICRO USB CABLE

6
GB CN DE FR RU
- PRODUCT COMPONENTS -
This Guide is applicable to many models of this series, and
only one model is shown in the figure.
FOCUS KNOB
VISUAL
ADJUSTMENT
VISUAL
ADJUSTMENT
PUPIL
DISTANCE
ADJUSTMENT
MENU BUTTON
CELL COVER
LOWER
BUTTON
RANGING
BUTTON
SHUTTER
BUTTON
POWER
BUTTON
UPPER
BUTTON
RANGING
MODULE
INFRARED
LENS
PUPIL
DISTANCE
ADJUSTMENT

7
GB CN DE FR RU
1. FOCUS RING
After the thermal imaging camera is turned on, it shall
be aimed at the target. When the distance between the
observation target changes, the image may be blurred.
Therefore, it is necessary to turn the lens focus ring to
refocus until the target image is clear.
2. LENS COVER
Please cover the lens to protect the lens when the
product is not in use!
3. USB TYPE-C PORT
The external port can be connected with the external
power supply to supply power to the product.
The output of the external power supply is 5V2A.
4. MICRO HDMI
Through the video cable of the external port, the external
power supply and the external screen can be connected
at the same time, and the image of the thermal imaging
camera can be output to the external monitor for display.

8
GB CN DE FR RU
CELL COVER
TYPE-C PORT
MICRO
HDMI
PORT
5. CELL COVER
Open the cell cover as shown and insert the cell.
NOTE: please insert the cell in the direction shown in
the figure, and do not push the cell forcibly.

9
GB CN DE FR RU
- QUICKSTART INSTRUCTIONS -
Button Current
device status Press Long Press
Power
button
Power on Compensation Display o/o
Power o / Power on
Display o Display on Display on
Shutter
button
Menu bar not
shown Take photos Video recording
Menu bar
display / /
Ranging
button
Menu bar not
shown / Turn on the
distance
function
Menu bar
display / Turn on the
distance
function
Menu
button
Menu bar not
shown Open shortcut menu Open Main Menu
Menu bar
display
Enter the lower
menu, or confirm
the options
Exit menu
without saving
settings
Upper
button
Menu bar not
shown Switch scene mode Zoom in
Menu bar
display Menu options move up /
Lower
button
Menu bar not
shown Switch to color palettes Zoom out
Menu bar
display Menu option moves down /

10
GB CN DE FR RU
【BUTTON DESCRIPTION】
BUTTON DESCRIPTION
1. POWER BUTTON
POWER ON:
Long press and hold the power button until the startup
picture appears in the eyepiece, then the device can be
turned on successfully.
POWER OFF:
a. Manual power-o: long press and hold the power
button, the power-o progress bar will be displayed,
and the power-o succeeds after the progress bar is
finished.
b. Automatic power-o: in the set automatic power-o
time, without any button operation, the automatic
power-o.
DISPLAY OFF:
Press and hold the power button, the progress bar of
power-o will be displayed. Before the progress bar is
finished, the power-o will be canceled and the Display
o mode will be entered.
DISPLAY ON:
In Display o mode, press any button to wake the screen.
COMPENSATION:
When it is turned on and the menu is out of the state,

11
GB CN DE FR RU
short-press the power on/o button to complete the
corresponding compensation action (except automatic
compensation).
2. PHOTOGRAPHING CONSTRUCTION
TAKE PHOTOS
When it is turned on and in the state where the menu
is not recalled, short-press, take a photo and freeze the
frame for 300ms to restore the real-time image.
VIDEO RECORDING
When it is turned on and in the state where the menu
is not called, long press and hold the photographing
button to start recording, and then long press and hold
the recording again to finish recording.
During the video recording, short-press to take photos
and freeze for 300ms to restore the real-time picture.
3. RANGING BUTTON
Press and hold the distance measuring button to enter
single distance measuring mode, press again to enter
continuous distance measuring mode, and press again
to exit distance measuring.
4. UPPER BUTTON
SWITCH SCENE MODE
Short-press to switch to Natural/Highlight/Enhance.

12
GB CN DE FR RU
ZOOM IN
Press and hold the upper button to enlarge the real-time
picture.
5. LOWER BUTTON
SWITCHING COLOR PALETTES
Short-press the button, to switch between white hot,
black hot, adjustable red hot, green hot, blue hot, iron
red.
ZOOM OUT
Long press button, can be changed from zoom in to
zoom out the real-time picture.
6. MENU BUTTON
SHORTCUT MENU
When it is powered on and the menu is not recalled,
short-press the Menu button, and the shortcut menu
option will appear.
MAIN MENU
When it is powered on and the menu is not recalled,
press and hold the menu button to display the main
menu option.
CONFIRM AND BACK/EXIT
When it is powered on and in the menu recall state, short-
press the Menu button to confirm the current selection
and return to the previous menu; Press and hold the

13
GB CN DE FR RU
menu button to return to or exit the menu without saving
the current settings.
【FUNCTION DESCRIPTION】
1. SHORTCUT MENU
· PIP: There are top left, top middle, and top right
positions to choose from.
· Screen BRI: Screen BRI level can be adjusted, 1-10
levels can be adjusted.
· Hot track: a white cross cursor is displayed when it is
turned on to trace the highest temperature point in
the full image.
· Super energy-saving: After being turned on, ARM
switches to low power consumption mode, OLED
brightness is fixed to 20% without adjustment, WIFI,
Bluetooth, ranging, GPS, compass and accelerometer
cannot be turned on, if it is currently turned on, the
above functions are deactivated.
2. MAIN MENU
· Image quality enhancement: image quality can be
adjusted by turning on.
· Scene Mode: Three scene modes, Natural/
Enhanced/Highlight, can be set.
· Color palette: can be adjusted between white hot,
black hot, adjustable red hot, green hot, blue hot

14
GB CN DE FR RU
and iron red.
· Brightness: detector brightness can be adjusted with
1-10 levels.
NOTE: The adjusted brightness value will be saved
in the current scene mode.
· Contrast: Adjustable for 1-10 levels.
NOTE: The adjusted contrast value will be saved in
the current scene mode.
· Compensation mode: automatic compensation/
scene compensation/shutter compensation can be
set.
· WiFi:
The WIFI can be used to transmit real-time video
to the mobile phone after the mobile phone client
is connected to the device, and the device can be
operated through the APP to access the photos/
videos of the device, photos/videos can be played,
shared, deleted, etc.
NOTE: Search and download 'TargetIR' APP in the
mobile phone APP store, open the APP, find the WiFi
name 'Binocular-TI-xxxx' in the settings of mobile
phone WiFi, and enter the password '12345678 ',
remote operation after successful connection.
· GPS: After GPS is turned on, the GPS information of

15
GB CN DE FR RU
the location of the device can be obtained.
· Compass: After opening and zeroing, current
orientation information can be displayed.
· Accelerometer: When turned on, it can indicate the
correction of the grip angle of the current device,
and when the device has an angle deviation, it will
give a homing prompt.
· Auto Stand-by: the Auto Stand-by time can be set to
5/10/15 min. If there is no operation within the set
time, the sleep state will be entered.
· Automatic power-o: The automatic power-o
time can be set to 15/30/60 minutes. If there is no
button operation at the set time, the power-o will
be entered, and the power-o will be completed.
· Working indicator lamp: The switch that controls the
working indicator lamp.
· Time format: selectable between 12H/24H.
· Date format: Optional from YYYY-MM-DD/MM-DD-
YYYY/DD-MM-YYYY.
· Time setting: enter the time adjustment port, you
can adjust the device time and date.
· Watermark Settings: can be selected in Time Only/
Date Only/Date Only and Time/O when turned on.
· Language setting: Available in Chinese/English/

16
GB CN DE FR RU
Russian/German/French.
· Memory card formatting: you can select formatting
memory card, select 'yes', memory card formatting,
select 'no', cancel the operation.
· Restore default: You can choose whether to
restore the default values. Select 'Yes' to restore all
parameters to factory settings; Select 'No' to cancel
the operation.
· Remote control: When it is turned on, it will search
for a Bluetooth remote control. After the connection
is successful, it can use the Bluetooth remote control
to control all functions of the button on the device
(except the power-o function).
NOTE: It shall be used together with optional
accessories.
· Laser indication: the display of red/yellow/green
laser indication icon can be toggled.
· Indication calibration: The coordinates of the three
laser Indicator icons can be set separately.
· About: Check the current device in the
APP,ARM,MCU,FPGA version number and MAC
address.
· Power display: When the thermal imaging camera
is turned on and the cell power level changes, the

17
GB CN DE FR RU
power indicator will be displayed on the lower
left corner of the screen, and the part with power
indicator on will display the remaining power of the
cell.
· After the power-on screen to enter the real-time
picture, the screen will display the icon corresponding
to the above power level.
NOTE: When the power is low, please replace the
cell in time!