Guide ThermoPro TP8 User manual

User Manual
1
ThermoProTM TP8 IR Thermal Camera
User Manual
Wuhan Guide Infrared Technology Co., Ltd.
No. 26 Shucheng Rd, Hongshan District, Wuhan 430070 P. R. China
Telephone: [phone]
Facsimile: [phone]
Email: [e-mail]
Internet: www.guide-infared.com
© Wuhan Guide Infrared Technology Co., Ltd., 2006
Publication No: ThermoProTM TP8 UM 008

User Manual
2
The Quality Management System of Wuhan Guide Infrared Technology Co., Ltd. is approved
to ISO9001:2000 for the design and manufacture, stockholding, in-house repair and site
servicing of non-contact temperature measuring instrumentation.
Wuhan Guide Infrared Technology Co., Ltd. reserves the right to make changes and
improvements on any of the products described in this manual without prior notice.
ThermoProTM TP8 IR Thermal Camera complies with current European
directives relating to electromagnetic compatibility and safety. (EMC
directive 89/336/EEC; Low voltage directive 73/23/EEC)
Copyright
© Wuhan Guide Infrared Technology Co., Ltd, 2006. All rights reserved worldwide. No parts of
the products may be reproduced, transmitted, transcribed or translated into any language or
computer language in any form or by any means, electronic, magnetic, optical, manual or
otherwise, without the prior written permission of Wuhan Guide Infrared Technology Co., Ltd.
This manual must not, in whole or part, be copied, photocopied, reproduced, translated or
transmitted to any electronic medium or machine readable form without prior consent, in
writing, from Wuhan Guide Infrared Technology Co., Ltd.

User Manual
3
Table of the Contents
Table of the Contents ................................................................................................................3
Introduction ...............................................................................................................................4
Precautions ...............................................................................................................................4
Maintenance..............................................................................................................................5
Calibration and Repair Philosophy............................................................................................6
Technical Support......................................................................................................................6
Feedback to Us .........................................................................................................................6
System Overview ......................................................................................................................7
System Configuration................................................................................................................7
Technical Specification..............................................................................................................8
System Features .....................................................................................................................12
Parts Described.......................................................................................................................14
Attaching and Detaching the LCD Screen ..............................................................................20
Inserting / Removing the SD Memory Card ............................................................................21
Inserting/ Replacing the Battery..............................................................................................22
Battery Charging .....................................................................................................................23
Introduction to Buttons & Joystick...........................................................................................25
Quick Start Guide....................................................................................................................28
Using the Camera ...................................................................................................................28
Using the Bluetooth Wireless Headset....................................................................................74
Video Output ...........................................................................................................................75
Transferring Data from the Camera to PC ..............................................................................76
Installing the Camera USB Driver to PC .................................................................................77
Controlling the Camera through RS232 Communication Protocol..........................................83
Troubleshooting ......................................................................................................................92
Emissivity ................................................................................................................................93
Typical Emissivity Values ........................................................................................................95

User Manual
4
Introduction
This publication provides the necessary information required to safely operate the
ThermoProTM TP8 IR Thermal Camera
It is important to fully check all equipment with which you have been supplied
The equipment should be used, maintained and serviced by suitably trained personnel,
capable of carefully following the procedures and guidelines given in this User Manual
All User Manuals and leaflets should be read thoroughly before proceeding with operation of
the equipment
It is also advisable that all User Manuals and Instruction Leaflets supplied are kept readily
available, for reference when the equipment is in general use
Precautions
The following precautions must be adhered to at all times and must be considered in addition to
any advised precautions issued at the relevant worksite or work area
•Keep the THERMOPROTM TP8 IR Thermal Camera steady during operation
•Do not use the THERMOPROTM TP8 IR Thermal Camera in temperature exceeding
its working and storage temperature ranges
•Do not direct the THERMOPROTM TP8 IR Thermal Camera at very high intensity
radiation sources such as the sun, carbon dioxide lasers or arc welders etc
•Do not expose the THERMOPROTM TP8 IR Thermal Camera to dust and moisture.
When operating the unit near water, ensure that the unit is adequately guarded
against splashes. Always replace the lens cap when the unit is not in operation
•When the THERMOPROTM TP8 IR Thermal Camera is not in use or is to be
transported, ensure that the unit and its accessories are stored in the protective
carry case

User Manual
5
•Do not jam the holes or loudspeaker on the camera body
•Do not re-switch on the camera until 15 seconds later after switching it off
•Do not throw, knock or vibrate intensely the camera and its components in order to
keep them from damage
•Do not attempt to open the camera body, as this action will void the warranty
•Keep the SD memory card for the exclusive use of the camera
The THERMOPROTM TP8 IR Thermal Camera utilizes a Lithium Ion (Li-Ion) rechargeable
battery pack. The following safety precautions must be adhered to at all times to ensure the
safe use of this equipment
•Do not disassemble or attempt to open the battery under any circumstances
•Do not expose the battery to fire or high temperatures
•Do not short circuit the battery
•Do keep the battery off moisture or water
•Charging of the battery should only be carried out using the recommended or
supplied charging device
Maintenance
To ensure that the THERMOPROTM TP8 IR Thermal Camera is kept in good working condition
and remains fully operational, the following guidelines should be adhered to at all times
Non-optical surfaces
The non-optical surfaces of the camera can be cleaned when required, with a soft cloth
dampened with water and a mild detergent
Optical surfaces
The optical surfaces of the camera lens should only be cleaned when visibly dirty. Care should
be taken to avoid touching the exposed lens surface, as skin acid left behind from fingerprints
can be damaging to coatings and lens substrates. Use only a proprietary lens cleaning tissue

User Manual
6
Calibration and Repair Philosophy
To ensure the accuracy and reliability of the THERMOPROTM TP8 IR Thermal Camera, it is
highly recommended that the instrument be calibrated at 12 monthly intervals
Calibration or repair for the instrument can be obtained by either contacting the address/
telephone number on the cover of this User Manual, or by email to the following addresses:
[email protected]
Caution
The THERMOPROTM TP8 IR Thermal Camera does not incorporate any user serviceable parts.
Never attempt to disassemble or modify the camera. Opening the unit invalidates the warranty
Technical Support
Technical support for your Wuhan Guide Thermal Imaging System can be obtained by either
contacting the address / telephone number on the cover of this User Manual or by email to the
following address: [email protected]
Feedback to Us
We have tested and verified the information in this manual to the best of our abilities. Yet as
we are committed to continuous development and progress, you might find features of the
product have been changed since the time of printing. You are appreciated to let us know
about any error you find, and your suggestions for further editions by either contacting the
address/telephone number on the cover of this User Manual or by email to the following
address: [email protected]

User Manual
7
System Overview
THERMOPROTM TP8, the most intelligent, innovative and integrated IR thermal imaging
system in the world
Improved on the most advanced IR package available now, integrating multiple technologies
never used in the industry, THERMOPROTM TP8 is another ingenious solution Wuhan Guide
provides for professional IR thermographers around the world.
In a rugged, compact and durable magnalium casing, THERMOPROTM TP8 offers a wide
assortment of unexpected features that enable thermographers to work with unprecedented
efficiency and productivity.
Exceeding all the existing IR radiometric cameras, it sets another new standard of the
first-class products for the whole industry.
System Configuration
Please ensure that the following items have been correctly supplied:
•IR Camera with visual camera, laser locator
•35mm IR lens
•3.5” VGA LCD Screen, 0.6” OLED viewfinder, touch pen
•2GB SD card & card reader
•Bluetooth wireless headset
•Two rechargeable Li-ion batteries
•Battery charger
•AC Adapter & cable
•VGA cable
•USB extension cable
•RS232 communication & TV video cable

User Manual
8
•RS232 communication protocol
•USB driver
•Guide IrAnalyser®Software
•User manual
•Carry case & strap
Options
•Remote control handle
•Tele lens
•Wide angle lens
•Extended temperature range
Technical Specification
Imaging Performance
THERMAL
Detector type: Uncooled FPA microbolometer (384× 288 pixels,
35μm)
Spectral Range: 8-14μm
Thermal Sensitivity: 0.08°Сat 30°С(Frame averaging algorithm)
Field of View/ Focus: 22°× 16°/ 35mm
Focus: Automatic or motorized
Electronic Zoom: ×1 to ×10 continuous zoom
VISUAL
Built-in Digital Video: CMOS Sensor, 1280× 1024 pixels, 215 colors

User Manual
9
Image Presentation
External Display: 3.5″high resolution color VGA LCD, 640× 480 pixels
Viewfinder 0.6″built-in high resolution color OLED, 640× 480
pixels
Video Output: VGA/PAL/ NTSC switchable
Man-Machine Communication
Touch Screen: Present and receive operator’s commands given by
touch
Auto Speech Recognition System: Automatically recognize and react to operators’ voice
commands
Remote Control Handle (optional) Respond as per operators’ operation
Joystick & Buttons: Respond as per operators’ operation
Menu: Microsoft®Windows style
Measurement
Temperature Range: Filter 1: -20 °С- +250°С;
Filter 2: 100°С- +800°С(up to +2000°Сoptional)
Accuracy: Filter 1: ±1°Сor ±1% of reading;
Filter 2: ±2°Сor ±2% of reading
Measurement Modes: Auto hot spot & auto alarm in live/ zoomed image &
video; 8 movable spots, 8 movable & changeable
areas displaying either max, min, or average, vertical
& horizontal line profile, histogram & isotherm in
live/zoomed/frozen/saved image & video
Emissivity Correction: Variable from 0.01 to 1.00 (in 0.01 increment)
Measurement Features: Automatic correction based on distance, relative
humidity, atmospheric transmission and external

User Manual
10
optics
Optics Transmission Correction: Auto, based on signals from sensors
Image Storage
Type: Removable 2GB SD card or built-in flash memory
File Format: JPEG (An individual file consists of infrared image,
visual image, voice annotation and text annotation if
any)
Voice Annotation: Up to 30 seconds per file (More than 30 seconds
optional)
Bluetooth wireless headset
Text Annotation: Selected from preset texts
Live Video Recording & Measurement & Storage
Recording: Thermal video recording to PC via USB2.0
Measurement: The same as image
Storage: In PC, capacity dependent on PC hard disk capacity
Optional Lenses
Field of View/ Focus: 7.7°× 5.8°/ 100mm
45.6°× 35°/ 16mm
Laser Locator
Classification Type: Class 2 semiconductor laser
Power System
Battery Type: Rechargeable Li-ion Camcorder battery, field-
replaceable
Charging System: In camera or in battery charger
Battery Operating Time: Over 2.5 hours continuous operation

User Manual
11
External Power Operation: AC adapter 110/ 220 VAC, 50/ 60Hz
Environmental Specification
Operating Temperature: -20°С- +60°С
Storage Temperature: -20°С- +60°С
Humidity: Operating and storing 10% to 95%, non- condensing
Encapsulation: IP54 IEC 529 housing
Shock: Operational: 25G, IEC 68-2-29
Vibration: Operational: 2G, IEC 68-2-6
Interfaces
USB 2.0: Real-time data transfer to PC & real-time control of
the camera on PC
RS232 communication: Control of camera on PC
Physical Characteristics
Housing: Magnalium
Weight: 0.85kg (excluding battery & LCD); 1.1kg(including
battery & LCD)
Size: 186mm×106mm× 83mm (Standard Model)
Tripod interface: 1/4″- 20

User Manual
12
System Features
Unique Features
•The highest-performance uncooled IR detector (384*288 pixels, 35 microns) offers
performance 45% higher than traditional detectors of 320*240 pixels, 45 microns
•640*480 LCD screen and 640*480 OLED viewfinder enable flexible high-resolution image
presentation
•Easily switchable VGA/ PAL/ NTSC video output simplifies video viewing; simultaneous
video output on VGA LCD screen, OLED viewfinder, a VGA display and a TV display is
available
•Camera can be controlled by touch screen, voice, remote control handle or joystick &
buttons, enabling the camera use in any demanded application
•Intelligent auto speech recognition system and intuitive touch screen free hands or at least
reduce hand operation
•Bluetooth voice recording enhances operators’ safety
•Real-time radiometric thermal video recording and JPEG image storage facilitate further
analysis and report generation
•Ultra large capacity SD memory card and built-in flash memory offer easy in-field storage
•High-speed USB2.0 interface enables real-time data transfer, live video recording and
camera control
•Windows-style man-machine interface & status display screen showing component status
reinforce the user-friendly feature
•Compact & durable magnalium camera casing raises reliability and operation easiness
•Robust on board analysis enhances operators’ efficiency & productivity
•Hot shoe technology enables hot swap of the VGA LCD screen and non-cable-connection
of the VGA LCD screen with camera body

User Manual
13
Imaging performance
•Display 256-level gray and color thermal image on both VGA LCD screen and viewfinder
•Display true color visual image on both VGA LCD screen and OLED viewfinder
•Output both thermal and visual video to other display devices (e.g. VGA display or TV set)
•Transfer live thermal video into PC via USB cable
•Continuously zoom in or out thermal image from x1 to x10
•Auto or motorized focusing of IR lens
Temperature measurement
•Auto calibration ensures high accuracy
•Auto hot-spot tracing and center-cursor temperature measurement pinpoint the problem
•Up to 8 spots can be analyzed simultaneously in live or zoomed or frozen or saved images
•Up to 8 areas can be analyzed simultaneously in live or zoomed or frozen or saved images,
showing respective Max, Min or Average temperature within each area
•Line analysis can be done in live or zoomed or frozen or saved images; line profile can be
switched into horizontal or vertical coordinates system
•Histogram analysis can be done in live or zoomed or frozen or saved images
•Isotherm analysis can be done in live or zoomed or frozen or saved images
Image Storage
•Live images can be frozen to be static images to do multiple-spot analysis, multiple-area
analysis, line analysis and isotherm analysis
•Frozen images, comprising radiometric data, infrared image, visual image, voice
annotation and text annotation, can be saved into 2GB SD card or the built-in flash
memory in standard JPEG format
•Up to 30-second digital clip of voice can be recorded and saved for each image

User Manual
14
•SD card can accommodate 1000 images and the built-in flash memory can store 450
images
•Live thermal video can be recorded onto PC via USB cable. Temperature measurement
and different kinds of analysis can be done on recorded video
Image Playback
•Images saved into SD card or the built-in flash memory can be replayed on the camera
•Temperature measurement and different kinds of analysis can be done on replayed
images
•Voice annotation, text annotation and visual images saved together with thermal images
can be replayed as well
•Recorded thermal video can be replayed on PC
•Images saved in SD card and the built-in flash memory can be downloaded to PC for
further analysis and report generation with software Guide IrAnalyser®
Parts Described
1. VGA LCD touch screen 2. IR lens
3. Visual focusing gear 4. VGA video interface
5.USB2.0interface 6.Batterydoor
7. Buckle for neck strap 8. Viewfinder

User Manual
15

User Manual
16
1. Dioptre adjuster 2. Microphone to record voice annotation
3. F1-F4 function buttons and power button
4. Status display screen for power status, USB, Bluetooth & SD card memory status
5. Joystick 6. Button S, Button C and Button A
7. Bluetooth window
1. RS232/ TV video interface 2. Power interface
1. Laser locator 2. Visual camera

User Manual
17
1. LCD mount
1. Tightening gear 2. Touch pen
3. Contact pins at the LCD screen foot

User Manual
18
RS232 and TV Video cable: Interfaces from the top down are respectively: RS232 interface to
PC, TV Video interface to a TV Video display device, TV Video/RS232 interface to the TV
Video /RS232 interface on camera
VGA cable: Interfaces from the top down are respectively: VGA video interface to the VGA
interface on camera, VGA interface to a VGA display device
USB extension cable: Interfaces from the top down are respectively: Interface to the camera
USB2.0 interface, interface to a USB interface on PC

User Manual
19
AC adapter and cable: Interfaces from the top down are respectively: Interface to be inserted
to the power interface on camera, plug to be connected to a socket or wall outlet
Camera with cables: from the top down and from left to right, the camera is connected with
VGA cable, USB extension cable, AC adapter cable and RS232/ TV video cable.
•If connecting the VGA cable and the video interface of RS232/ TV video cable to
corresponding devices, such as a VGA display device and a TV video display device, you
can view the live video taken by the camera simultaneously on VGA LCD touch screen,
OLED viewfinder, the VGA display device and the TV video display device.
•If connecting the RS232 interface of RS232/ TV video cable to a PC with RS232
communication port, you can view the live video on the video display device and
meanwhile control the camera on PC via RS232 communication protocol.

User Manual
20
•If only connecting the USB extension cable to a PC with USB2.0 interface and running the
corresponding menu commands of Guide IrAnalyser® software (e.g. sub-command
Device Video of command Video under menu File), you can view the live thermal video on
PC, control the camera on PC and also record live thermal video into PC.
•If connecting all the cables above to corresponding devices and execute the corresponding
commands in the Guide IrAnalyser® software (i.e. sub-command Device Video of
command Video under menu File), the camera will switch to USB mode immediately. Now
you can view the live video on PC, control the camera on PC and also record live thermal
video into PC with the help of Guide IrAnalyser® software, but at the meantime, the VGA
LCD touch screen, OLED viewfinder, VGA display device and TV video display device will
display prompt “USB Mode” only.
Rechargeable lithium battery Battery charger Bluetooth wireless headset
Attaching and Detaching the LCD Screen
Attaching the LCD screen:
•Mount the LCD screen to the camera by sliding the LCD screen foot into the mount on top
of the camera. Then rotate the tightening gear clockwise to make the LCD screen locked in
place