Gyration Cyberview2000 User manual

Smart PTZ Camera
User manual
Cyberview2000

1. Camera*1
2. Support bracket kit*1
3. Power adapter*1
4. Mounting screw kit*1
5. USB charging cable*1
6. Operation instruction*1
01
Packing list

Product appearance
Lens Microphone
Indicator light
USB Type-C Port
02
Micro-SD card slot
Reset button

Quick start
The wireless smart camera supports DC power supply.
The wireless smart battery camera supports Android and iOS App.
For your best experience, please scan the QR code below with your
mobile phone, install the app, and follow the instruction to
complete the user registration.
Sign in to App，connect to Wi-Fi and add the device according to
the prompts (please bring the device close to the router when
configuring).
1. Download and install the App
2. Add the device
Scan QR code or go to the link to download and install
the App：https://www.cyberviewplus.com/download/
Android
Download
Download
App Store
03

Bind the camera
1) Click the "Add Now" button in the app, press and hold the camera
switch button for 3 seconds to turn on the camera, and the app will
automatically search for devices that are on and not bound. Select
the device you want to bind in the search results for the next step.
2) Enter the name and password of the Wi-Fi network you want the
camera to connect to. To ensure longdistance connection, the
camera only supports 2.4GHz WiFi network with stronger wall
penetration capability and does not support Wi-Fi with enterprise
level authentication.
04

3) After a while, the camera will play a sound indicating that the
connection is successful. At this point, please set a name for the
camera on the app and select the location where you want to place
the camera. Click Finish to complete the pairing.
Please make sure that the Wi-Fi meets the requirements, click Next
after completion, and the app can try to connect the camera to the
Wi-Fi.
05

Install the camera
(1) Select a good spot for your camera
Select a good spot for your camera, please install the camera in a
position where its view is not blocked and ensure that it is within
the coverage of the WiFi network.
(2) Install the bracket
Fix the camera to the desired location. You can directly place the
camera on a flat surface or fix the bracket to the wall or ceiling by
screws, and then screw the camera to the fixed base.
06

07

Unbinding Device
If this device has been connected to other Wi-Fi or has been bound
by other users, you need to unbind the device before rebinding.
Device unbinding method: After the device is powered on and
selfchecked, press and hold the reset button of the device for 5
seconds, the device will be reset and unbound.
08
USB Type-C Port

3) For the members you need to share, find "Add a Friend's Camera"
on the "User" page to enter the scanning page.
2) Click "Invite",and a QR code will be generated for sharing.
Share the camera
1) Find the camera you want to share on the App homepage or camera
setting page. Click the share button and enter the sharing page.
09