Haier HWM90-9188 User manual

HWM90-9188
HWM90-9188DD

Names of the parts
Meaning and description of the symbols
Warning sign
Forbidding sign
Contents marked with that symbol are related to the safety of the product and
the personal safety of the users. Please operate in strict conformity to the
contents, otherwise it may cause damage of the machine or injure the personal
safety of the user.
Contents marked with that symbol are actions forbidden to perform. Performing
of those actions may result in damage of the machine or injure the personal
safety of the user.
Please understand the shapes of the washing machine and accessories may be different
from the sketch
 figures in this manual due to product improvement.

Out tub cover
Detergent box
Handle
Top lid component
Filter frame
Lint filter
Inner tub
Pulsater
Cabinet
Adjustable leg
Adjustable leg film
Base frame
Power cord
Drain hose
Back cover
Water inlet valve
Water absorption
(2 pieces)
Fixed leg
(2 pieces)
(2 pieces)
Control pannel
Bleach Inlet
Panel
Hook
Screw cover
Cover Lock

Safety precautions
Benzene
2


Back
Front
Bottom plate
Soft laying cloth


Back
Front
Screw
Bottom plate
Soft laying cloth
1. Place the washing machine
on the soft laying cloth, the
face is towards the upper.
2. Insert the bottom cover into
the slots of the bottom cover,
and then tighten it with screw.
Adjust the installation position
If the floor is uneven, adjust the adjustable feet of the
washing machine to level position.
Uplift the feet slightly and turn the feet to level position.
The distance between the washing machine and wall:
at least 20 mm.
Max. tilt angle on the supporting face: 2°.
20mm
20mm
High Low

$$ %
P

Place the washing machine on
the laying cloth, take out the
drainage pipe along the groove
the bottom of the washing
machine and then embed it in the
opposite direction.

6

7

8



Bleach Inlet



3DJH

 

Cover lock function
During running process, the top lid lock is still locking if the power off or power plug is pulled out and shall not open the top lid.
If the washing process is over, please confirm the light of top lid lock is go out before pull the power plug out.
Remark:
In order to protect the Washing Machine, please don't try to open the top lid while the light of the top lid is lighting.
+S

Program

For the MEMORY and STANDARD programs,the washing machine can detect the laundries
automatically,and the water level will set to one of 2,4,6,8.If put in wet laundries, it maybe set to
waterlevel 8.You shall set waterlevel by yourself.

* EXWWRQ 5<,1*' 
H
1.5
For the DELICATE,BLANKET programs,push the RINSE botton, choose or cancel rinse process,
but can't change the rinse time.
For the DELICATE,BLANKET programs,push the WASH botton, choose or cancel wash process,
but can't change the wash time.
For the DELICATE programs,push the SOAK botton, choose or cancel soak process, but can't
change the soak time.
For the DELICATE,BLANKET programs,push the SPIN botton, choose or cancel spin process, but
can't change the spin time.
If you first slect program then select “AIR DRY”,it can be reserved.
if you select “AIR DRY” only after press power ON.

and memory
The soak procedure can work in cooperation with automatic programs like MEMORY ,HEAVY,ECONOMY
,STANDARD and DELICATE .There is intermittent pulsator stiming during soak.
During speedy and tub dry programs, push the soak, wash ,rinse,spin button, the machine have no
reaction.

3DJH
16 hours later, finish wash
3DJH


The machine will beep to indicate the
end of the cycle then automatically cut
the power off.

Dismantle Install
Thinner
Petrol
Alcohol
16

Trouble shooting Answer to question
(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns
sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special
maintenance department or after-sale service department of our company. Do not repair it by yourself.
It is to avoid splashing during water inlet.
The pulsator pauses during water inlet in wash
and rinse.

Phenomena The reason How to settle
Water level sensor is abnormal? Please contact with after-sales
service department.
Cover lock fails to lock? Switch off the power, switch on again.
The digitron displays “E6”,buzzing
The digitron displays “E8”,buzzing

6SHFLILFDWLRQ
Rated voltage frequency
ډ
Rated Washing/spinning capacity
Dimensions(mm)
Weight
Inlet pressure
Water level/Waterquantity(L)
220V-240V~ 50Hz
ډ
9.0kg/9.0kg
0.03MPa-1.0MPa
L 610mm W 620mm H995mm
HWM90-9188：44kg HWM90-9188DD：45kg
1/22,2/30,3/40,4/49,5/58,6/67,7/75,8/88
6GXZ4U'