Haier XQB50-10 User manual

Automatic Washing Machine
XQB50-10
SERVICE MANUAL
10 minutes QUICK WASH program,4 water level
Full plastic cabinet, never rusts
Spray current
Features
Special No.: SM XQB50-10-01 Edition: 2006.7.18
Models

Automatic Washing Machine
Model: XQB50-10
1.Contents 1
2..
3. Specifications 3
4. 4
5. 5
6. Net dimension 6
7. 6
8. Parts and functions 10
9. Maintenance service and trouble shooting 11
10. Wiring diagram 17
11. Exploded view 18
12. List of parts 20
Features 2
Safety precautions
Warning and cautions
Installation and accessory parts
Contents

2
Brand new appearance:
The model is novel and nice, with full streamline curving shape to make the whole unit compact
in structure.
Music prompting: It adopts the nationally originated music buzzer, which will prompt
you the current mode during washing with sweet music.
Low vibration and low noise: the low noise retarder clutch, motor and mute drain
motor, and the advanced air damping system can guarantee the washing machine
operating under low vibration and noise.
Automatic power-off function: If the washing machine is not started after the power is
switched on, or the washing is finished, the power will be switched off automatically
after 5 minutes for the sake of safety.
Alarm against breakdown: the washing machine will alarm with abnormal display and
buzzer when the drain hose is not put down, or when top lid is open, or the laundries are
slanting during automatic program or spinning, or when the imbalance can not be revised.
Automatic imbalance-revising function: during spinning, if the laundries are slanting
and bumping the tub, the washing machine will add one rinse automatically to revise the
imbalance.
10-minute quick wash program (suitable for laundries less than 2.0kg): please select
this program to wash laundries with light dirt. This program only costs 10 minutes for
the whole washing procedure from water inlet, wash, rinse to spin.
4-water level selection: This machine offers 4 water level selection with lowest 20L
level. It can offer water levels corresponding laundries from below 1.0kg to 5.0kg. It can
save more water.
Automatic Washing Machine
Model: XQB50-10
Features

3
Automatic Washing Machine
Model: XQB50-10
Model
New Model XQB50-10
Free standing
Built under ×
EAN code 6901570056449
Energy eff iciency class —
Features for use
Wash capac ity kg 5
Spin capacity kg 5
Preset H
Residual dampness %
Contral model
contraller
Normal computerized
Fuzzy c omputerized
Frequency c onvers ion
Service features
Programs
Short cycle
Inlet heating select
Heating selection
Spinning cycle (selector )
Spinning cycle (v ariable)
Start/Pause
Automatic balncing
Aesthetics
Drain type
Door (glass=g / plastic=p)
Adjustable f eet
Desiccation
Air-dry
Dr y in g
Te chnical d ata
Voltage/f requency V/H z
Water cons umtpion L
Wash pow er W
Spin pow er W
Special func tion
Air- Bubble
Feet w heel
Water fall current
Dimensions (measurements)
Height / built under mm
Width mm
Depth / w ith open door mm
Dimensions packed ( measurements packed)
Height mm
Width mm
Depth mm
Net weight kg
Gross weight kg
20'Container load Set s
40 Container load Set s
40HContainer load Set s
<115%
×
×
×
6
F
×
×
×
directly drain (drain down )
_
110v 60Hz
117
380
×
×
250
×
×
×
×
890
520
520
970
586
25
29
80
586
160
160
Specifications

4
Automatic Washing Machine
Model: XQB50-10
Please plug the plug on special 110V AC
receptacle.Please guarantee that the
earthing wire is ear-thed reliably.
The power cord plug should be convenient
to be pluged in or pluged out with hand
while the washing machine runs normally.
Be sure to pull the plug out and close the
water tap when the machine is idle,when
moving the machine,or when cleaning
the machine.Do not use wet hand to ins-
ert or pull out the power plug.
In case the washing machine is installed on ground with
carpet, do not block the ventilation hole with carpet.
Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the
plugging into the receptacle is loose, do not use the plug any more.
Do not wash water-proof laundries like the raincoat,
bike covers etc. to avoid abnormal vibrations in spinning.
Do not use water hotter above 50 C .
Do not put the machine at damp place like
the bathroom. Never wash it with water.
Do Not put wet laundries on the control panel.
soft items
The ventilation holes
at the bottom
earth
Do not bend ,extend,twist,bind by force.Do not press or nip it with weight.
Keep the pin of the power plug clean,if the power plug is polluted with dust,
please wipe with dry cloth carefully.
Safety precautions

Automatic Washing Machine
Model: XQB50-10
Do not decompose, repair or alter the
machine by yourself.
Do not put any hot or heavy items (such
as the kettle with hot water ) on the
washing machine.
Do not wash laundries with volatile
materials (such as thinner, petrol etc.)
The handicapped or children without
care shall not use the machine. Keep the machine away from direct
sunlight and heat source like the heater.
Do not stretch hands into the working
machine. It is dangerous even if the
rotation is slow. Take special care of
the children.Do not let the children
climb the washing machine.
Petrol
Thinner
.
To prevent your laundries and washing
machine from damage,be sure to take
out all of the foreign materials from your
pocket,such as coins,buttons,sand or
hairpins etc.
Before washing,please check if the water
tap is open ,and if the water inlet pipe is
connected properly.
It is suggested to use low-foaming was-
hing powder
To prevent the lint in the tub from blocking
the cascade outlet and influencing the
cascade effect, please keep the lint filter
in good condition, and install it to proper
position during washing.
Warning and cautions

Unit mm
Figure 1
INSTALLATION AND ACCESSORY PARTS
Please install and adjust the washing machine according to the requirement of this manual.
It is important for user's safe and proper using the machine.
The distance of washing machine to wall should be longer than 20mm.The largest
allowed slope of the base of the machine is 2 . The slanting or rough ground will
result in unstable running or stoppage of the machine. Please adjust it with following
methods:
Confirm it's horizontal:
Hang the lead line to confirm if it is horizontal.
<2
Adjust the installation position
Automatic Washing Machine
Model: XQB50-10
Net dimension

Adjust the adjustable foot:
Loosen Fasten
High Low
Adjustable nut
Adjustable foot
1.To twist the adjustable foot, please first lift up the side of the foot slightly, loosen
the adjustable nut, and twist the foot.
2.Fasten the nut after adjustment.
1.Lean the machine down gently with the
front surface facing the ground.
3.Extend the drain hose from the left side.
Push the drain hose into the groove with
hands.
2.Pull out the drain hose from the right side
groove.
Back
Front
Soft item
Use this groove after
direction changing
Push the drain hose
into the groove with
hands at this point
How to change the direction of the drain hose
Automatic Washing Machine
Model: XQB50-10
INSTALLATION AND ACCESSORY PARTS

Automatic Washing Machine
Model: XQB50-10
INSTALLATION AND ACCESSORY PARTS
If the extra hose is too long, cut it either
at point A or B.
<10cm
BA
> 30mm
<1.5m
Usage of the drain hose
The drainage shall be smooth with the drain hose.
1.The height of the drain hose shall be
less than 10cm , or the drainage will
not be smooth enough and cause
incomplete drainage.
2.Do not tramp or press the drain hose.
3.If the drain hose is too long, cut it at mid point.
To make smooth drainage, cut the front end of
the hose slantingly.
4.If extra drain hose is needed , please make
separate purchase. The inner diameter of the
extra hose shall not less than 40mm, and the
length shall not exceed 1.5m.

Automatic Washing Machine
Model: XQB50-10
Water absorption cushion
Nut of the water inlet hose
Jointer of the water inlet valve
Install the water inlet hose
1. Insert a new flat washer into each end of the inlet hoses. Firmly put the
washers in the coupling.
2. Connect the water inlet hoses to the water faucet.
Use the new hose sets supplied with the washer.
Any other old hose sets should not be used.
You may have to use pliers to tighten the coupling.
Do not over tighten because you may cause
damage to the valve.
Note:
3. Connect the other ends to their respective cold and hot water inlet valve
located at the rear of the washer
Check the connection between the water inlet
hose and the water tap
1.Swaying the hose gently to confirm if it is fastened
stable.
2.After installation, open the tap to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection
between the water inlet hose and the water tap,
and the connection between the water inlet hose and
washer are firm, so as to prevent dropping from
improve Installation position.
1.Close the water tap.
2. Pull off the water inlet hose from the water tap
and washer
Take down the water inlet hose
4.Fasten the nut. Swing it gently to confirm if it's suitable.
INSTALLATION AND ACCESSORY PARTS