Haier XQSB60-JN User manual

This manual is for
Please read this manual
carefully before using.
Retain it for future reference.
XQSB60-JN
User's manual
Environment-friendly double-driver
automatic washing machine
0030806318B

Names of the parts..................................................1
Safety precautions ................................................2
Installation and adjustment ..............................4
Install the water inlet hose....................................6
Preparation before washing................................................8
The musts in washing ...........................................8
Usage of the detergent ....................................9
Put in laundries..............................................9
Close the top lid..................................................................9
Use the operation buttons .................................10
Finish washing ...................................................16
Disposal after washing .........................................17
Trouble shooting *Answer to question..............................18
Packing list ...............................................19
Specification..............................................................19
Contents

Names of the parts
Top lid handle
Adjustable leg film
Water absorption
cushion
Drain hose
Back cover
Water inlet valve
Inner cover component
Detergent box
Control panel
Outer tub cover
Balance ring
Inner tub
Lint filter(2 pieces)
Front control board
Cabinet
Cabinet base
Fixed leg (3 pieces)
Adjustable leg
Softener inlet
Front door
Pulsator
Handle(2 pieces)
Top lid component
Decorative board
Attachment block
(2 pieces)
Liquid bleacher
inlet
1
Meaning and description of the symbols
Warning sign
Forbidden sign
Contents marked with that symbol are related to the
safety of the product and the personal safety of the
users. Please operate in strict conformity to the contents,
otherwise it may cause damage of the machine or
injure the personal safety of the user.
Contents marked with that symbol are actions forbidden
to perform. Performing of those actions may result
in damage of the machine or injure the personal
safety of the user.

2
Do not wash water-proof laundry like the raincoat,
bike covers etc. To avoid abcommon vibrations in
spinning and damages to the laundries.
In common usage of the washing machine, the power
plug shall be ready to be pulled or plugged with hand.
Be sure to pull the plug off and close the water faucet
when occurring power failure, delivering the machine,
setting the machine idle or cleaning the machine. Do
not plug or pull the power plug with wet hand.
Do not use water with temperature higher than 50
Safety precautions
In case the washing machine is installed on ground
with carpet, be careful not to block the ventilation hole
with carpet.
Do not put the machine at damp place like the
bathroom. Never wash it with water. Do not
put wet laundries on the control panel coating.
Do not let the machine share one receptacle with other
electric appliances. If the power plug is damaged, or
the plugging into the receptacle is loose, do not use
the plug any more.
Do not bend,stretch, twist, bind the power cord by force, or reform it.
Do not pressor clamp it with heavy items. If the power cord and power
plug are bad,or the receptacle is loose, be sure to have it replaced by
the technicians ofour special shopor our agent,or the after-salesservice
department to avoidany risk. Keep the prong of the power plugclean. If
dust is foundon the powerplug, please wipeit off withdry cloth.
Please insert the power cord into special receptacle
with rated voltage. Be sure to use single-phase three
pins receptacle. Ensure the earthing prong of the
power receptacle is earthed reliably. Use leakage
protector if possible.
The ventilation
holes at the bottom

3
Safety precautions
Do not put hand into the rotating tub. It is dangerous
even if the rotation speed is slow. Take special care of
the children. Keep children away from the washing
machine to avoid them climbing on.
Do not decompose, repair or alter the machine by
yourself.
Do not put any hot or heavy items (such as the
kettle with hot water) on the washing machine.
Do not wash laundry with volatile materials
(such as thinner, petrol etc.).
Keep the machine away from direct sunlight and
heat source like the heater.
The handicapped or Childrenwithout care shall not
use the machine.
Please keep the lint filter in good
condition, and install it to proper
position during washing. If
the lint filter is lost or damaged,
please contact the local after-sales
service department of our company.
Benzene
To protect your laundries and washing machine,
please take out all of the coins, buttons, sand, hairpin
and other foreign materials before washing.
Please check if the water faucet is open, and if the connection of the water inlet pipe is proper before washing.
Please put down the drain hose before washing.
It is suggested to use foamless washing powder.
Please don't use the washer in the environment below 0 if the washer has been stored below 0 please
be sure to ensure the washer is placed under the room temperature for 24 hours and then use otherwise the
washing effects may be lowered or the washer may be damaged.
Dismantle
Install

4
Please install and adjust the machine according to the requirement of the manual.
It is very important to your security and correct operating the machine.
Installation and adjustment
After opening the package, please lean the washing
machine gently down on soft items (like towel cloth,
blanket, etc.). Install the bottom plate to the bottom
of the machine with four screws by a cross screwdriver,
then lift the machine up gently.
See to the figure:
Install the inner cover component
Install the bottom plate
1.Open the top lid of the washing machine.
2.Put the inner cover component on the outer tub cover,
aiming the inner cover shaft to the installation hole of the
corresponding outer tub cover shaft groove.
3.Firstly insert the inner cover shaft of one side into the
corresponding outer tub cover shaft groove, then push
the another inner cover shaft into the corresponding
outer tub cover shaft groove. Please install to designated
position to guarantee there are no dropping or abcommon
sound in opening and closing of the inner cover, and the
operation shall be smooth. Do not dismount the inner
cover component after washing.
Soft object
Bottom plate
Back
Screw
Front
Inner cover
Inner cover shaft
Outer tub cover
Outer tub cover
shaft groove
Right hand
Left hand

5
Usage the drain hose
The washing machineaway from wallshould be overrun20mm. The largestallowable slope ofthe
shank base ofthe machine is1 .The slanting orrough ground willresult in unstablerunning or
stoppage of themachine. Please adjustit with followingmethods:
Confirm it's horizontal:
Hang the lead line to check if it is
horizontal.
Adjust the adjustableleg:
Adjust the Installation position
1 .Totwist the adjustableleg, please firstlift up the
side of theleg slightly,loosen the adjustablenut,
and twist theleg.
2 . Afteradjustment, fasten thenut.
Fasten
Loosen
High Low
the adjustable nut
the adjustable feet
The drainage shall be smooth with the drain hose.
1.The height of the drain hose shall be less than 10cm,
or the drainage will not be smooth, and cost such long
time that the machine may stop at mid way.
2.Do not step on or press the drain hose.
4.If extra drain hose is needed, please make separate
purchase. The inner diameter of the extra hose shall
not less than 30mm, and the length shall not exceed
1.5m.
5.If the extra hose is too long,cut it either at
A or at B point.
AB
<10cm
A
> 30mm
<1.5m
3. If the drain hose is too long, cut it at mid point. To make
smooth drainage, cut the front end of the hose slantingly.

6
Install the water inlet hose
1. Attach the water inlet hoses to the water faucet. Using pliers, tighten
the coupling. ( As figure 1)
NOTE: Do not over tighten. Damage to the valves can result.
2. Connect the other ends to the water inlet valve .
( As figure 2)
Figure 1
Water absorption cushion
Jointer of the water inlet hose
Jointer of the
water inlet valve
Figure 2

7
1.After using, Closethe water tap.
2. Pull off the water inlethose from thewater tap and washer
Take down the water inlet hose
Check the connection between the jointer of
the water inlet hose and the water tap
1.Swing the hose gently to confirm if it is fastened stable.
2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection
between the jointer of the water inlet hose and the
water faucet, and the installation of the water inlet
hose are firm, so as to prevent dropping from
improper installation position.

8
1 Preparation before washing
Confirm if there's
special requirement
for the laundries.
Clear the pocket.
Take out the coins ,
sand, hairpins etc.
Fasten the buttons
and zippers.
When the pulsator is
running ,the buttons of
the laundries may cause
noise. For the sake of
discretion ,please put
the laundries with
buttons into other
laundries.
Preparation before washing
The quantity of the
laundries shall not
exceed the rated
value. The big
laundries like the
jeans shall be put
in loosely.
Pay attention to followings before washing the laundries
1.Connect the water inlet hose.
2.Confirm that the washing machine is earthed
reliably . Then insert the power plug into the
receptacle. Do not connect the earth terminal
to the gas pipe and tap water pipe.
a. Check if the laundries are applicable for washing with machine.
B. Divide the laundries that are not colorfast from other laundries.
c. Put those laundries difficult to absorb water into water with hand.
d. For those laundries with heavy soil, please first remove the dirt like mud or dust. For the parts with heavy soil,
please apply detergent in advance, which can make it easier to remove the soil.
e. For those laundries that may get lint ball and those with long fur, turn it over before putting in.
f. Do not put those laundries polluted by chemicals directly into the washing machine.
The capacity of washing of the machine refer to the largest weight of the standard laundries under dry
condition that can be washed in one time.
The thickness ,size , type of the cloth will influence the actual washing capacity. It is suitable to put in
reasonable amount of laundries and the laundries can be turned round in washing for one time washing.
Do not select high water level for small quantity of laundries ,so as to avoid splashing of water.
2 The musts in washing
4.The ground inclination or unevenness may cause
the washer operating not steadily or cause noise,
please set level the washer.
It is suggested to use foamless washing powder.