Haiwell G-Box User manual

Xiamen Haiwell tehnology Co., Ltd. en.haiwell.com
4G Industrial Router G-BOX User Manual
Haiwell G-Box User Manual
4G Industrial Router

www.haiwell.com Haiwell G-BOX User Manual
2 /5
Contents
1. Product Model List and External Dimension............................................................................................................................................. 3
2. Indicator Light Instruction............................................................................................................................................................................. 3
3. Product Specifications.................................................................................................................................................................................. 3
4. Power Specifications and Environmental Specifications.........................................................................................................................3
5. 4G Industrial Router Application Example................................................................................................................................................. 4
5.1 4G Industrial Router and equipment (HMI) direct connection.....................................................................................................4
5.2 4G Industrial Router connected to the switches........................................................................................................................... 4
6. Precautions for the use of 4G Industrial Routers..................................................................................................................................... 5

www.haiwell.com Haiwell G-BOX User Manual
3 /5
1. Product Model List and External Dimension
Model
Power (24VDC)
External Dimension
G-Box
0.2A
83mm×70.8mm×24.65mm
1. 4G Indicator light
4. SMA Antenna interface
2. 3G/2G Indicator light
5. LAN interface
3. SIM card slot
6. 24v Power interface
2. Indicator Light Instruction
①LAN port indicator light:orange light, normally on - not established with the equipment; communication flashing - no
communication with the equipment; green light, normally on - normal power supply;normally off - abnormal power supply.
②Network indicator light: 4G indicator light two-tone indicator light (red and green); 3G/2G indicator light monochrome indicator (blue).
Network state
4G indicator light
3G/2GIndicator light
The device is registered to 4G, and the data connection has been established
Green light normally on
The device is registered to 4G, but the data connection is not established
Flashing green
There is a SIM card, but not registered on the network
Red light normally on
Inserting a blank card or without a card
Flashing red
The device is registered to 3G/2G, and the data connection has been established
Blue light normally on
The device is registered to 3G/2G, and the data connection is not established
Flashing blue
3. Product Specifications
Project
Specifications
Shell
Aluminum alloy profile
Interface
LAN port (10MB/100MB), SIM port, SMA antenna interface
Indicator light
2 LED lights
Authentication
RoHS、Weee
Network type
4G Industrial Router, support - LTE TDD: B38/39/40 / FDD - 41 LTE: B1/3/8/5 UMTS: B1/5/8 td-scdma: B34 /
GSM: 39 B3/8 Cat4
TCP/IP protocol
IPV4/IPV6
4. Power Specifications and Environmental Specifications
Project
Environmental specifications
Temperature
Working temperature: -20～+70ºC storage temperature: -40～+85ºC humidity: ≤95% (no condensation).
Power dissipation
Standby power consumption: the maximum power consumption is about 50mA@24V DC; working power
consumption: the maximum power consumption is about 200mA@24V DC

www.haiwell.com Haiwell G-BOX User Manual
4 /5
5. 4G Industrial Router Application Example
5.1 4G Industrial Router and equipment (HMI) direct connection
①The device inserts a SIM card with a flow function (such as China Mobile, China Unicom, Telecom Phone Number Card or IoT
Card), and the SIM card has the copper core facing up;
②Put the SIM card into the SIM card interface as shown above, then press the SIM card inward gently with a small screwdriver
and hear the sound of "click" , indicating that the SIM card has been stuck tight. If you need to take out the SIM card, just
Press the SIM card inward with a small screwdriver and the SIM card will pop up;
③Screw the matching antenna at the RF identification port of the device.
④Provide 24V DC regulated power supply to the device, and connect the LAN port of the G-BOX with the device, such as the
LAN port of the HMI, with a network cable;
⑤If G-BOX and HMI are powered on, HMI can be accessed remotely by setting the network of HMI to DHCP (automatic
acquisition of IP).
5.2 4G Industrial Router connected to the switches
①The device inserts a SIM card with a flow function (such as China Mobile, China Unicom, Telecom Phone Number Card or IoT
Card), and the SIM card has the copper core facing up;
②Put the SIM card into the SIM card interface as shown above, then press the SIM card inward gently with a small screwdriver
and hear the sound of "click" , indicating that the SIM card has been stuck tight. If you need to take out the SIM card, just
Press the SIM card inward with a small screwdriver and the SIM card will pop up;
③Screw the matching antenna at the RF identification port of the device.
④Provide 24V DC regulated power supply to the device, connect the LAN port of the G-BOX to the LAN port of the switch with
a network cable, and connect the LAN port of all devices to the LAN port of the switch;
⑤After all devices are powered on, enter basic setting of HMI and set the HMI network to DHCP (automatically obtain
IP) to achieve remote access to the HMI. Similarly, the network settings of other devices can be changed to DHCP
to access the Internet.
Ethernet

www.haiwell.com Haiwell G-BOX User Manual
5 /5
6. Precautions for the use of 4G Industrial Routers
①If the HMI is connected to a 4G Industrial Router, the HMI cannot connect to the cloud setting using DHCP?
Answer: change the dynamic IP to static IP in the network state setting of HMI. The static IP will retain the dynamic IP
parameters. just setting the DNS114.114.114.114 or 8.8.8.8 in the static IP to solve this situation.
②How long does it take to establish a data connection after the 4G Industrial Router is powered on?
Answer: At the beginning of power-on, the 4G red light flashes for about 10s, then the green light flashes. After 30s, the green
light is normally on, indicating that the data communication link is normal.
Thanks for choosing Haiwell products, If you have any questions about our products or services, please let us know!
Haiwell website: www.haiwell.com Copyright © 2005 Xiamen Haiwell Technology Co.,Ltd.