Halex Titan BTX User manual

Titan BTX Electronic Dartboard _ 1
Titan BTX
ELECTRONIC DARTBOARD
with Deluxe Game Room Wood Cabinet
Owner’s Manual
And Game Instructions
#64476

Titan BTX Electronic Dartboard _ 2
LIMITED-1 YEAR WARRANTY
This Halex product is warranted to be free from defects in workmanship or
materials at the time of purchase for a period of 1 (one) year.
Should any evidence of defects appear within the limited warranty period
after the date of purchase, Regent Sports will either send replacement
parts or advise another course of action. A list of replaceable parts can be
found on the parts order page of this manual. Parts not listed on this order
form are not replaceable. This warranty covers normal consumer use and
does not cover failures, which result from alterations, accidents, misuse,
abuse, or neglect.
For prompt warranty service and special offers, please register your Halex
product by visiting our website at www.regent-halex.com or send in the
warranty registration card provided. Please be sure to visit our website to
order additional parts not covered under the warranty, as well as on-line
instruction manuals and new product information.
A purchase receipt or other proof of date of purchase will be required
before warranty service is performed. Requests for warranty service can
be provided by e-mailing the Customer Service Department at
[email protected] or by calling customer service at:
877-516-9707 (Toll-Free)
10:30AM to 6:30 PM, EST. (Dec. through Feb.)
10:30 AM to 5:00 PM, EST. (March through November)
Or send request in writing to:
Regent Sports Corporation
45 Ranick Road
Hauppauge, NY 11788
Attn: Halex Customer Service
This warranty gives you specific legal rights and you may have other
rights, which vary, from state to state.
Unpacking the Game
Unpack your new dartboard carefully, making sure all parts are included. The following
components are included in this set:
•1 Electronic Dartboard •Owner’s Manual
•24 Darts (unassembled) •Deluxe Wood Cabinet
•A/C Adapter •Soft tip replacement pack
If you are missing a part or have any questions, please call our Customer Service
Department between 10:30 AM and 7:00 PM, EST. at 877-516-9707 (Toll-Free).

Titan BTX Electronic Dartboard _ 3
Setup / Mounting Instructions
Choose a location to hang the dartboard where there is about 10 feet of open space in front
of the board. The “toe-line” should be 7’ 9 1/4” from the face of the dartboard. Since this
dartboard is powered with an AC adapter, you may want to mount it close to an electric
outlet for convenience.
Mount the dart board into the screw receivers of the cabinet using the screws provided.
The mounting brackets on this cabinet set are 16” apart so it can be mounted securely on
wall studs in your home. Locate a wall stud and place a mark 84.5” from the floor. Measure
16” from your first mark (staying level with the first mark) and place the second mark on the
wall, which should be over another wall stud (refer to diagram on next page).
Screw 2 mounting screws in the center of the studs using the marks you made as guides.
Be sure the screws are level to ensure an accurate playing surface. If not mounting into
studs, be sure to use drywall anchors or other securing hardware appropriate to the wall you
are using. This dartboard cabinet is heavy and it is highly recommended that you mount it
to wall studs.
Mount the cabinet on the wall by lining up the hang brackets on the back of the cabinet with
the screws (see diagram below). It may be necessary to adjust the screws until the board
fits snugly against the wall.
Å16” Æ
Hang Brackets
Screw Receivers

Titan BTX Electronic Dartboard _ 4
Mounting Instructions (continued)
Center of bullseye should be 5’ 8” from the ground.
Plug the A/C adapter into the wall outlet and into the jack at the bottom right of the
dartboard and you’re ready to play.
X X
84.5”
Wall Studs
7’ 9 ¼”
Toe
Line
5’ 8” from Floor
to center of
Bullseye
Dartboard

Titan BTX Electronic Dartboard _ 5
Dartboard Functions
POWER switch - Located on the lower right corner on the side of the dartboard. Be sure
the AC Adapter is plugged into the jack on the right side of the dartboard. Press the
POWER switch to turn game on or off.
GAME GUARD button – Press to activate Game Guard Feature
BOUNCE OUT button - Decide before play if you want to count darts that do not remain in
board (“bounce-outs”) or not. If not, simply press the BOUNCE OUT button immediately
after a bounce out occurs to deduct the score that registers
DART-OUT/SCORE button - The dart-out feature is active only during the “01” games
(301, 401, etc.). When a player’s score falls below 160, he/she can press the DART OUT
button to get a suggestion from the dartboard as to the 3 darts needed to finish the game.
Note: doubles and triples are indicated with 2 and 3 dashes to the left of the number
respectively. The SCORE feature allows player to access score not current on display.
SOUND button – Press continually to set desired volume level or mute.
DOUBLE/MISS button - This button is used to activate the Double In/Double Out and
Master Out options for the “01” games. This function is only active when selecting 301,
401, etc. games. The MISS feature is active during play of any game. Press button to
register a “missed” dart. Player can press when dart lands outside target area so computer
registers a thrown dart.
CYBERMATCH button – Press to activate Cybermatch feature where you can play against
the computer. Press continually to cycle through the 5 different skill levels.
PLAYER/PAGE button - This button is used at the start of each game to select the number
of players you want to play the game. In addition, this button allows players to see other
player scores of not on active display. This dartboard keeps track of scores for up to 16
players.
SELECT button - Press to select various difficulty settings for games. Many games contain
several difficulty options that can be accessed by pressing this button. Refer to Game
Menu on page 23 for complete list of games.
GAME button - Press to page through the on-screen game menu and select game.
QuickPick buttons – These four game buttons launch you directly into the indicated games
START/HOLD button - This multi-function button is used to:
•START the game when all options have been selected.
•HOLD to put dartboard in HOLD status between rounds to allow player to
remove darts from the target area.
RESET button – Press to clear display and reset dartboard to opening sound.

Titan BTX Electronic Dartboard _ 6
This dartboard utilizes the Halex exclusive state-of-the-art SofTech target playing
surface. The SofTech surface plays and feels just like the natural bristle sisal of a
traditional dartboard with the added benefit of electronic scoring. Our SofTech
target provides a smooth quiet dart playing experience - the way the sport was
meant to be played! With this Silent Shot™ Feature, there are no more
unpleasant crashing sounds from darts making impact on plastic targets. SofTech
boards perform like no other electronic dartboard. There are no small holes in the
SofTech target surface, darts have the maximum amount of surface area to strike
upon. This minimizes the chances of deflected darts and bounce outs. We hope
that you find your darting experience more enjoyable with SofTech.
Please note that SofTech dartboards are intended for use with
Soft Tip Darts Only!Because of the durable SofTech surface, players have the
option to use heavier darts than used on standard electronic dartboards. (Halex
standard electronic dartboards recommend use of darts less than 18 grams.)
However, SofTech dartboards can be used with darts up to 22 grams for more
realistic play.
Use of Steel tip darts can permanently damage the dartboard’s target web and
other dart board components and will void your warranty. Please look for our line
of BristleTech™ products that allow for steel tip electronic dart play.
All SofTech dartboards come with unique spare SofTech style tips. Although any
type of Soft tip will work with SoftTech dartboards, it is highly recommended that
SofTech dart tips be used for maximum performance. SofTech tips are available
directly from Regent Sports and can be found on the spare part list at the back of
this manual.

Titan BTX Electronic Dartboard _ 7
Electronic Dartboard Operation
1. Press the POWER switch to ON position ( | ) to activate dartboard. A short musical
introduction is played as the display goes through power-up test.
Press GAME button until desired game is displayed
– or press any of the QuickPick buttons.
2. Press DOUBLE button (optional) to select starting and/or ending on doubles or
Master Out (used only in 301 - 901 games). This is explained in the game rules
section.
3. Press PLAYER button to select the number of players (1, 2, ... 16). The
default setting is 2 players.
Or select CyberMatch option by pressing CYBERMATCH button.
4. Press START/HOLD button (red) to activate game and begin play.
5. Throw darts
•When all 3 darts have been thrown, a voice command will indicate “Remove
Darts” and the score will flash. The darts can now be removed without
affecting the electronic scoring. When all darts are removed from the
playing surface press the START button to go to next player. Voice
command will indicate which player is up. Also, the player indicator lights
will illuminate to show which player’s turn it is.
Display Protective Film
This electronic dartboard may have a clear film over the entire display area and over the
button area to prevent scratching during shipping. It is recommended that you remove this
film so display is easier to read. To remove, simply lift edge, peel off, and discard.
Game Guard Feature
After the START button has been pressed and play has begun, the GAME GUARD feature
can be activated. When the button is pressed, all of the keys will ‘lock’. When Game Guard
is active, a misguided dart hitting a button will not affecting your game. To deactivate the
Game Guard, simply press the button again and the keys will unlock.

Titan BTX Electronic Dartboard _ 8
CyberMatch Feature
This exciting feature allows single player to play against the computer at one of five different
levels of skill! Only 1 player can compete against the CyberMatch competitor at a
time. The CyberMatch feature adds a level of competition to normally routine practice
sessions.
To activate the CyberMatch opponent:
1. Select the Game you wish to play
2. Press CYBERMATCH button
Select CyberMatch opponent skill level by pressing the CYBERMATCH button
continually (voice command will indicate level):
Level 1 (C1) Professional
Level 2 (C2) Expert
Level 3 (C3) Advanced
Level 4 (C4) Intermediate
Level 5 (C5) Beginner
3. Press START to begin play
When play begins:
The ‘human’ player throws first. After 3 darts are thrown, go to the board to take darts
out and press START to change to the next player (CyberMatch). Watch as the
CyberMatch opponent’s dart scores are registered on the display. The dartboard will
indicate the segment the CyberMatch opponent is throwing for in the Active Score
Display (the ATTEMPT LED will light). Then the Active Score Display will indicate the
segment that the CyberMatch opponent actually scored (the RESULT LED will light).
After the CyberMatch opponent completes his round, the board will automatically
reset for the “human” player. Play continues until one player wins. Good luck!
QuickPick Game Buttons
These buttons launch you directly into the game indicated below the button. With the large
selection of available games included in this dartboard, these buttons are a convenient way
to jump directly into a game. The default setting is for 2 players.
Cybermatch
Skill Levels

Titan BTX Electronic Dartboard _ 9
Caring for your Electronic Dartboard
1. Never use metal tipped darts on this dartboard. Metal tipped darts will seriously
damage the circuitry and electronic operation of this dartboard.
2. Do not use excessive force when throwing darts. Throwing darts too hard will
cause frequent tip breakage and cause excess wear on the board.
3. Turn darts clockwise as you pull them from the board. This makes it easier to
remove darts and extends the life of the tips.
4. If you need to replace your AC adapter, use only a genuine Halex AC adapter
(available directly from Halex) for this dartboard. Use of a non-Halex AC adapter
may cause electrical shock, fire, and damage to the electronic circuits and will void your
warranty
5. Do not spill liquids on the dartboard. Do not use spray cleaners, cleaners that
contain ammonia or other harsh chemicals, as they may cause damage.
External Speaker Jack
This dartboard is equipped to handle external speakers for premium sound. The line-out
jack is located on the right side of the dartboard to the right of the LED display. Only
speakers with power booster will work with this dartboard. If the speakers operate on their
own power (run on AC power or batteries), they will be compatible.

Titan BTX Electronic Dartboard _ 10
Game Rules
The Titan BTX electronic dartboard is loaded with games and options. The rules for each
game are detailed below in the order they appear on the LED display when paging through
the games. An illustration of the LED displays is indicated next to the game description for
your reference. Please note the characters may appear slightly different than illustrated
here.
301
This popular tournament and pub game is played by subtracting each dart from the starting
total until the player reaches exactly 0 (zero). If a player goes past zero it is considered a
“Bust” and the score returns to where it was at the start of that round. For example, if a
player needs a 32 to finish the game and he/she hits a 20, 8, and 10 (totals 38), the score
goes back to 32 for the next round.
In playing the game, the double in / double out option can be chosen (double out is the most
widely used option). Simply press the “DOUBLE” button to change this setting. LED
indicators will display your current setting:
•Double In - A double must be hit before points are subtracted from the total.
In other words, a player’s scoring does not begin until a double is hit.
•Double Out - A double must be hit to end the game. This means that an
even number is necessary to finish the game.
•Double In and Double Out - A double is required to start and end scoring
of the game by each player.
•Master Out - A double or triple is required to finish the game.
Dart-Out Feature (“01” games only)
This electronic dartboard has a special “Dart Out” feature. When a player requires less
than 160 to reach zero, the estimate feature becomes active. The player can press the
DART OUT button to view the darts necessary to throw to finish the game (reach zero
exactly). Doubles and triples are indicated with 2 or 3 lines to the left of each number
respectively.
Adjustable Difficulty Settings for 301 include 401, 501, 601, 701, 801, and 901. To
change to these more difficult settings, simply press the SELECT button. Each option is
played exactly as outlined for 301 with the exception of the starting total; 401 has starting
total of 401 points; 501 has starting total of 501 points and so on up to 901.