Hall Research Technologies SP-DVI-2A User manual

CUSTOMER
SUPPORT
INFORMATION
Order toll-free in the U.S. 800-959-6439
FREE technical support, Call 714-641-6607 or fax [phone]
Mail order: Hall Research, 1163 Warner Ave., Tustin, CA 92780
Web site: www.hallresearch.com • E-mail: info@ hallresearch.com
Models SP-DVI-2A and SP-DVI-4A
2 & 4 Port DVI Video Splitter/Extender
SP-DVI-2A/4A User’s Manual
UMA1064 Rev. A

2 and 4 Port DVI Switch
1
Trademarks Used In this Manual
Hall Research Technologies and logo are trademarks of Hall Research
Technologies, Inc. Any other trademarks mentioned in this manual are
acknowledged to be the property of the trademark owners.
Federal Communications Commission Statement
This equipment generates; uses and radiates radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. It has been tested and found to comply
with the limits for a Class A computing device, pursuant to Part 15 of the FCC
rules. Harmful interference when operated in a commercial environment.
Operation of this equipment in a residential area may cause interference, in
which case the user, at his own expense, will be required to take whatever
measures are necessary to correct the interference.
European Union Declaration of Conformity
This product has been tested and shown to comply with the
requirements of the European EMC directive 89/336/EEC
1.0 General
Thank you for purchasing this Hall Research DVI Video Splitter/Extender. The
splitter allows routing of a single DVI equipped device (such as PC) to multiple
DVI displays (such as plasma or LCD screens). The Splitters support single-
link, DVI-I (integrated Analog and/or Digital) video signals at resolutions of up
to 1600x1200. The DVI Splitters feature front panel LED indicator for power on
state, plus they can be used to extend the DVI output to 10 meters (33 ft).
2.0 Features
•Clear & sharp image at resolution up to 1600x1200 (including 1080i).
•Supports both digital and analog DVI signals (DVI-I), allowing you to
connect a DVI-I equipped PC to monitors that have DVI-I or legacy
monitors with VGA inputs only (In this case HD15 to DVI cable will
be necessary)
•Can be cascaded (2-levels deep) for more outputs
•Installs in minutes
•Compliant with the specification of DVI 1.0
•1U rack design for 4-channel version (Model SP-DVI-4A)

SW-DVI-2A/4A User's Manual
2
3.0 Installation
1. Your package includes the Splitter box, a power supply and this Manual
(the 4 port Splitter also includes rack-mount kit). You need to purchase an
input cable for connection to your video source and possible output
extension cables to go to your monitors. Hall Research sells high quality
DVI cables and adapters at various lengths.
2. Make sure the PC, the Splitter, and the monitors are all turned off
3. Plug the monitor’s cables into the DVI OUT ports of the Splitter (Note that
at least one monitor needs to be connected to the output 1 of the Splitter)
4. Plug a male-to-male extension cable from PC’s DVI port to the Splitter
5. Plug the supplied power adapter to the unit (The green LED on the front
panel turns on)
6. Turn on the monitors.
7. Turn on the PC.
4.0 Cascade Operation
For more outputs you can connect output #1 of the Splitter to the input of a
Slave Splitter. It is recommended to keep cascading to only 2-levels deep.

2 and 4 Port DVI Switch
3
5.0 Troubleshooting
Cable Length Limitations
The splitter can accept up to 5 meters of cable on its input and 10 meters on its
output for a total of 15 meters (50 feet total). At long distances if you start to
experience video degradation, you should turn the refresh rate and/or resolution
of the video signal lower.
HDCP (Content Protection) Problems in Home-theatre A/V applications
The Splitter is designed to work with PC’s with DVI outputs. It may or may not
work fine with A/V equipment that has integrated DVI connectors. Hall
Research does not guarantee compatibility with HDCP encoded video sources
on the market. Please contact HRT for information on HDMI (new standard for
home-theatre digital A/V connections) capable equipment.
If you are convinced that the unit is defective …
Do not open or try to repair the unit yourself. There are no customer serviceable
items in the unit and you will void your warranty by doing so.
5.1 Contacting Hall Research and Shipping/Packaging
Contact HRT Support at 714-641-6607 or via email or web. Before you do,
make a record of the history of the problem. We will be able to provide more
efficient and accurate assistance if you have a complete description. If you need
to ship your converter for repair, make sure to get a Return Material
Authorization (RMA) number first.

SW-DVI-2A/4A User's Manual
4
6.0 Specifications
Standards DVI-I Single Link, Compliant with DDWG DVI 1.0 Standard
Resolutions PC resolutions up to 1600x1200 @ 60 Hz & HDTV to 1080i
Temperature Operating: 32 to 122°F (0 to 50°C);
Storage: –40 to +185°F (–40 to +85°C)
Enclosure Steel
MTBF 90,000 hours (calculated estimate)
Power From utility-power (mains) outlet, through included external
power supply.
2-Port: Output Voltage: 12 vDC Center-Positive 600 ma maximum
4-Port: Output Voltage: 12 vDC Center-Positive 1.25 A maximum
Size 2-Port: 6" (153mm) x 3" (76mm) x 1.8" (46mm)
(w x d x h) 4-Port: 10.6" (269mm) x 4.1" (105mm) x 1.8" (46mm)
Shipping 2-Port: 1.5 pounds
Weight 4-Port: 2.7 pounds

Order toll-free in the U.S. 800-959-6439
FREE technical support, Call 714-641-6607 or fax [phone]
Mail order: Hall Research, 1163 Warner Ave., Tustin, CA 92780
Web site: www.hallresearch.com • E-mail: info@ hallresearch.com
CUSTOMER
SUPPORT
INFORMATION
© Copyright 2010. Hall Research Inc.
All rights reserved