HaloCigs TRACER User manual

TRACER
SUB-OHM TANK
v.2

INTRODUCTION
Thank you for purchasing the TRACER tank. Please read this
manual carefully before using to ensure optimal performance.
This high performance tank is the perfect combination of style
and functionality. Along with a four-port adjustable airow
valve and a 4 ml capacity, the TRACER tank houses a sub-ohm
coil head wrapped in organic cotton. Loading the TRACER tank
is quick and easy with its specially designed anti-leak, top-ll
feature.
The remarkably ecient TRACER tank is constructed of the
nest quality materials, ensuring a long lifespan and the purest
possible vaping experience.

TANK COMPONENTS
TANK BREAKDOWN
Mouthpiece
Cap
Chamber Coil Head
Airow
Control
Base
FILLING YOUR TANK
When to Rell Tanks
TRACER tanks perform best when lled with at least 2 ml
of e-liquid continuously. This ensures the heating element
remains moist during use, and will extend the overall life of
the coil head. It is recommended that tanks be relled once the
e-liquid level drops below the top of the coil head.
How to Rell Tanks
The TRACER tank can be lled without the need to remove it
from the battery. To ll, ensure the tank is oriented with the
mouthpiece facing upright. With your thumb and index nger
directly underneath the grooves of the mouthpiece, gently twist

FILLING YOUR TANK
counter-clockwise to unscrew the TRACER tank’s cap. Once the
cap is removed, carefully pour e-liquid into either of the two bean
shaped openings.
NOTE: Be sure not to ll the center hole of the chamber as the
e-liquid will ow directly out of the tank.
The chamber should be lled ¾ of the way up. Once lled,
reattach the TRACER tank’s cap by lining up the threads and
slowly twisting clockwise until snuggly fastened. After allowing
60 seconds for the e-liquid to soak into the coil head, your
TRACER tank is ready for use.
FILLING YOUR TANK
Unscrew
Cap Fill Chamber Reattach Cap

TANK FEATURES
Adjustable Airow
The TRACER tank is equipped with an
adjustable airow system. A wider air
hole creates a “looser” draw that results
in cooler vapor. A narrow hole creates
a “tighter” draw with warmer vapor.
Generally, larger airow is better for
lung inhales, while smaller airow is
best suited for mouth inhales. To adjust
airow, twist the ring on the base of the
hardware left or right to change the size
of the air hole.
TANK FEATURES
Top-Fill Design
The TRACER tank comes equipped with a convenient top-
ll design, making it simple to ll with e-liquid. This highly
ecient design results in a cleaner overall lling process,
eliminating the need to detach the TRACER tank from the
battery while lling.
Interchangeable Mouthpiece
The TRACER tank comes standard with both a stainless
steel and glass mouthpiece. These components are
interchangeable based on personal preference and will not
aect the overall performance of the TRACER tank.

COIL HEAD REPLACEMENT
chamber. Once the base is removed,
the coil head will be exposed. Unscrew
and remove the old coil head from the
base by turning counter-clockwise.
Dispose of the old coil head, ensuring
it is kept out of reach of children and
pets. Attach a new coil head to the
base by lining up the threads and
turning clockwise until snug. Fill as
needed and allow 60 seconds for
e-liquid to soak into the coil head
before resuming use.
COIL HEAD REPLACEMENT
When to Replace the Coil Head
The TRACER tank is designed with a replaceable center coil
head. If you consistently experience a burnt taste when vaping
or your TRACER tank is no longer producing adequate vapor, it
may be time to replace the coil head. It is also recommended to
change the coil head when switching e-liquid to prevent carry
over of avor.
How to Replace the Coil Head
To replace the TRACER coil head, rst unscrew the entire
tank from the battery. Once the tank is removed, hold the
tank mouthpiece side down and unscrew the base from the

TANK CLEANING
the base by turning counter-clockwise. Dispose of the coil head
or store in a safe place for future usage. Remove the cap with
mouthpiece and rinse all components (except for the coil head)
under warm water until all remaining e-liquid is extracted. You
may use a cotton swab to clear away any lingering e-liquid.
Components to Clean Do Not Clean
TANK CLEANING
When to Clean Tanks
Your TRACER tank should be cleaned on a regular basis to
remove any residue that may collect inside the chamber. It is
also highly recommended to clean the tank when switching
between e-liquids to ensure there is no carry over of avor.
How to Clean Tanks
In order to thoroughly clean the tank, each individual
component should be disassembled. First, unscrew the entire
tank from the battery. Once removed, hold the TRACER tank
with the mouthpiece side down and unscrew the base from
the chamber by turning counter-clockwise. Dispose of any
remaining e-liquid. Unscrew and remove the coil head from Mouthpiece BaseCap Chamber Coil Head

WARNINGS
Storage: The TRACER tank should be kept out of reach of children
and pets and stored safely in a dry environment.
Improper Usage: The use of any third-party accessories may lead
to malfunction and/or damage of this product.
Guarantee: The TRACER oers a 30-day satisfaction guarantee.
However, e-liquids and coil assemblies are consumable items and
will not be refunded.
Warranty: Claims for products damaged by improper usage will
not be accepted. This includes, but is not limited to, the use of
third-party hardware and/or improper handling.

Nicopure Labs, LLC.
5909 NW 18th Drive | Gainesville, FL 32653
nicopure.com