Hama 220810 User manual

00
220810
TV WALL BRACKET
GOperating Instructions

Contents
1. Explanationofwarning symbols and notes ..........................3
2. Package contents.............................................4
3. Additionally required tools ......................................4
4. Safety instructions ............................................5
5. Application and specifications ...................................5
6. Preparation and assembly ......................................6
6.1 Mounting on the wall.........................................7
6.1.1 Preparing the intended mounting surface ........................7
6.1.2 Attaching the wall bracket....................................8
6.2 Mounting on the TV set .......................................9
6.2.1 Mounting the VESA plate on the back of the TV set ................10
6.3 Mounting the TV on the wall bracket ............................11
7. Adjustment&maintenance ....................................12
8. Setting options..............................................12
9. Technical data ..............................................13
10. Warranty disclaimer .........................................14
11. Service and support .........................................14
12. Warranty conditions.........................................14

GOperatingInstructions
Thank you for choosing aHama product.
Take your time and read the followinginstructions and information completely. Please keep these instructions
in asafe place for futurereference. If you sellthe device, pass on the illustrated quickstart guide and the safety
instructions in printed form tothe new owner.
1. Explanation of warning symbols and notes
Warning
This symbol is used toindicate safety instructionsortodrawyourattention to specichazardsand risks.
Note
This symbol is used toindicate additionalinformation or important notes.

2. Package contents
•TV wallbracket
•VESA arms (2x)
•Spirit level
•Mounting kit
•Safety instructions, illustrated quick start guide
Mounting kit
A1 6x50(x4) D1 M8x12 (x4)
A2
Ø8x50 (x4)
D2 M8x20(x4)
A3 M6 (x4) D3 M8x30(x4)
B1 M6 (x4) D4 M8x50(x4)*
B2 Ø8x10 (x4) E1 M4x12(x4)
B3 Ø8x20(x4) E2 M4x20(x4)
C1 M6x12 (x4) F1 (x1)
C2 M6x20(x4)
*M8x50 +Ø8x5 =M8x45
Note
Please check the mountingkit for completeness beforeinstalling the bracket andensure thatthereare no
faulty or damaged parts.
3. Additionally required tools
8mm 10
Note
Never installthe bracket alone. Seek assistanceand help!

4. Safety instructions
Warning
•Given the multitude of terminaldevices and wallstructuresavailable on the market,the suppliedmounting
kit is unable to cover every option.
•It occasionally happens thatthe screws for attaching the device to the bracket aretoo long.
•Please note that the supplied wall plugs arefor use with solid, hollow andboardconstructionmaterials
only.
•Read the operatinginstructionsfor your terminal device beforeattempting to mount it. The instructions
provide information about thetype and measurements of suitable fastening materials.
•If the supplied mounting kit does not contain suitable fastening materialsfor mounting the terminal device,
purchase these from aspecialised dealer.
•Never apply force during assembly.This candamage your device or the holder.
•If in doubt, have this productinstalled by aqualied technician -donot attempt to installityourself!
•Do not mount the productabove locations where persons might sit or stand.
•Once you have mounted the productand theattached load, checkthattheyare suciently secureand safe
to use.
•Youshould repeat this checkatregularintervals(at least every threemonths).
•Ensurethat the product does not exceed its maximum permitted carryingcapacityand thatnoload exceeding
the maximum permitted dimensionsisattached.
•Make sure that the productisloaded symmetrically.
•Maintain the necessary safety clearancearoundthe attached load (depending on themodel).
•In the event of damage tothe product,remove the attached load and stop using the product.
•Do not attach anyadditional objectstothe product.
5. Application andspecifications
•The bracket is used for mounting at screens in private, non-commercialhouseholds.
•The bracket is intended only for use inside buildings.
•Use the bracket only for theintended purpose.

6. Preparation and assembly
Note
•Never installthe bracket alone. Seek assistance and help!
•Different end devices havedifferentconnections for cablingand otherdevices.Beforecommencing the
installation, check whether the necessary connections can stillbereached aftermounting.
•Depending on theproductand mountingmethod, you may not need allparts of the mounting kit. It is
thereforepossible that unneeded screws and other smallparts willbeleftovereven aftercorrect mounting.
Keep these in asafe placetogether withthese operating instructions foruse for later reference (saleofthe
product, movinghouse, relocation of the bracket, new TV,etc.).
Warning
•Be awarethat the brackets areonly suitable forwallmounting.
•Before installation,check thatthe wall you have chosen is suitable for the weighttobemounted. Also
make sure that thereare no electric, water, gas or other lines running through the wall at the mounting
site.
Note -Fischer plugs
The Fischer plugs supplied areapproved for the following building materials:
•Concrete
•Plasterboardand gypsum breboard
•Vertical perforated brick
•Lightweight concrete hollow block
•Hollow brick andconcrete ceilings
•Perforated sand-lime brick
•Solid sand-lime brick
•Natural stone
•Aerated concrete
•Chipboard
•Solid plaster boards
•Lightweight concrete solid block
•Solid brick

8mm
6.1 Mounting on the wall
6.1.1 Preparing the intended mounting surface
Get support and help from other people for the following assemblysteps.
8mm
60 mm
Ø8mm
•First use the bracket as atemplateand re-measureifnecessary to ensure thatthe position is correct. Use a
spirit level to checkthe horizontaland verticalalignment of the bracket on the wall.Now mark the holeson
the wall.
•To attach the wallbracket tothe wall,you need adrilland adrilling attachment with adiameterof8mm.
Make sure that the drilling attachment is suitable for the intended wall. Thedepth of the holeshould be
60mm .
•To ensureasecurehold, vacuum outthe drillholes with avacuum nozzlesothatthe drillhole is free of drill
dust. Now insert the plug [A2] intothe drillhole so that it is ush with the hole.

6.1.2 Attachingthe wall bracket
A2
A3
A1
F1
10
•Attach the wallbracket tothe wall as shown above usingthe enclosed mounting material ([A2] plug, [A3] M6
washer,[A1] 6x50 mm screwand the [F1]spirit level).

6.2 Mounting on the TV set
Note
•Given the multitude of terminaldevices structures available on the market,wecannot describe allpossible
mounting options here.
•Please ensurethat the bracket lays at and evenly on the back of the television.
•Use the enclosed spacer to even out any unevenness on the backofthe television.
•Ensurethat allscrews have the proper lengthand can be mounted untiltheyare hand-tight.

6.2.1 Mounting the VESAplateonthe back of the TV set
B1
B2, B3
C1,C2,
D1,D2,
D3,D4,
E1, E2
Curved TV back
C2, D2, D4,E2B1B2
++
D3, D4 B3
+
M8x50M8x45 (D4)Ø8x5
+=
Flat TV back
C1,D1, D4,E1B1
+
Youdonot need a
washerfor theD-screws
•Mount the VESA armsthe backofyour TV set.
•Note the combination of screw,washer and spacer listed above for your at or curved TV.

6.3 Mounting the TV onthe wall bracket
Get support and help from other people for the following assemblystep.
•Hang the TV set withthe mounted VESAarms on thewallbracket as shown above.
•Turn the screws, as shown above, on bothsupporting arms tosecurethe bracket in place.

7. Adjustment&maintenance
Note
Never adjust the bracketalone. Seek assistance and help!
Note -tiltable /full-motionbrackets
•Ensurethat no electricalcables arecrushed or damaged during installation or adjustment.
•During adjustment, ensurethat the product is loadedsymmetricallyand that the maximum permittedcarrying
capacity is not exceeded.
•Check the strength and operational safety of the bracket and the load attached to it at regular intervals (at
least quarterly).
•Clean only with water or conventional householdcleaners.
8. Setting options
-12°
Tilting
•To adjust the tilt angle, open the fasteningscrewsatthe side, set the required tilt,and then securethe screws
in placeagain.

9. Technical data
Maximum load: 35 kg
Screen diagonal:
81.0 -165.0 cm (US: 32" -65")
Depth: 2.8 cm
Tilt: -12°(depending on the device)
Dimensions of thewallmounting plate: 9.6 x42.0 cm
Mount:
Compliant with VESA standard:
100x100
200x200
200x300
300x200
300x300
400x400

10. Warranty disclaimer
Hama GmbH &CoKGassumes noliability and provides no warranty for damage resulting from improper
installation/mounting, improper use of the product or from failuretoobserve the operating instructions and/or
safety notes.
11. Service andsupport
Please contact HamaProduct Consultingifyou have any questions about this product.
Hotline: [phone] (German/English)
Further support information can be found here: www.hama.com
12. Warranty conditions
Forthis product, HAMA GmbH&CoKGgrantsyou an extended manufacturer's warranty for freedom from
defects, usability,workmanship and thedurability of the materials used foraperiodof10years. Excluded from
the guarantee is the compatibilityofthe product with futurestandards of furtherdeveloped hardware.
Within the specied period, Hama GmbH &CoKGwillremedy ajustied warranty claim at itsown discretion,
free of charge, either by repair or replacement.
The warranty period beginsonthe dateofpurchaseofthis product andisvalid throughout the EU.
The warranty grantedisinaddition to and doesnot affect your statutoryrights. Damage caused by improper
use, normalwear and tear, exposure to chemicals or force majeure, as wellastampering or repairs by you or
thirdparties, areexcluded from thewarranty.
Furthermore, accessories thatare not part of the basic equipment of the product (promotional parts) are
excluded from the warranty.
In the event of awarrantyclaim,please contactusatHamaGmbH &CoKG, DresdnerStr.9,86653 Monheim,
Germany, enclosing proof of purchase. Youare also welcometocontactusatwww.hama.de or by phone on
+49(0)9091/502-0.