Hame 434T User manual

Model: 434T
User Manual
02-May-2013

Table of Contents
Chapter I Product Introduction..........................................................................................................3
1.1 Product appearance and LED indicators................................................................................................3
Chapter II Product Installation..........................................................................................................4
2.1 ireless network connection- take indows Xp for example Power 434T.......................................4
2.2 Login User management Interface (UI)................................................................................................6
2.3 i-Fi password modification.................................................................................................................7
2.4 Default factory setting............................................................................................................................9
Chapter III Internet access mode setting ..............................................................................................10
3.13G..........................................................................................................................................................10
3.1.1 Insert the SIM card............................................................................................................................10
3.1.2 Connect to a PC...............................................................................................................................10
3.1.3 Connect to a telephone set...............................................................................................................11
3.2 ADSL ..................................................................................................................................................11
3.3 DHCP(Hotel)..................................................................................................................................11
3.4 STATIC IP(Campus)............................................................................................................................11
3.5 IFI Hotspot.......................................................................................................................................12
Chapter Software feature Ⅴ..............................................................................................13
5.1 Internet settings....................................................................................................................................14
5.1.1 AN .........................................................................................................................................14
5.1.1.1 STATIC Mode................................................................................................................15
5.1.1.2 DHCP Mode...................................................................................................................15
5.1.1.3 PPPOE (ADSL) Mode...................................................................................................16
5.1.1.4 3G Mode........................................................................................................................18
5.1.1.5 IFI...............................................................................................................................19
5.1.2 LAN..........................................................................................................................................20
5.1.3 Static Routing............................................................................................................................20
5.1.4 DHCP clients.............................................................................................................................21
5.2 ireless Network Settings...................................................................................................................22
5.2.1 IFI Settings............................................................................................................................22
5.3 Firewall ...............................................................................................................................................25
5.3.1 Content Filter............................................................................................................................25
5.3.2 Address Filter ...........................................................................................................................26
5.3.3 Virtual Server............................................................................................................................28
5.3.4 System Security........................................................................................................................31
5.3.5 DMZ Settings............................................................................................................................31
5.4 Admin...................................................................................................................................................31
5.4.1 Status ........................................................................................................................................32
5.4.2 Management..............................................................................................................................33
5.4.3 Upload.......................................................................................................................................35
2

5.4.4 Settings......................................................................................................................................36
Chapter V FTP.................................................................................................................................37
5.5 FTP: files download and upload................................................................................................37
...........................................................................................................................................................37
Chapter I Product Introduction
1.1 Product appearance and L D indicators
3

Chapter II Product Installation
2.1 Wireless network connection- take Windows Xp for example Power 434T
(1)Select “wireless network connection” on “Network Connection” property of the
4

computer desktop. See as below,make the In ternet protocol to “ ob ta in IP address
automat ical ly ” .
(2)The icon “ ” comes on the r ight bottom of computer desktop ,press r ight
but ton of mouse then se lect “ V iew Avai lable Wire less Networks ” in the prompt
session.
Select SSID:3GRouter_xxxx f rom the wire less network connect ion l i s t ,cl ick
“connect” button,
5

(3)When“Connected”,i t means connect ion success.
2.2 Login User management Interface (UI)
(1) Open Web browser input “http ://192.168.169.1 ” in Address bar and press
“ Enter ” .
6

(2) In the following pop-up window input User name: admin;Password: admin and click
“Login”.
2.3 Wi-Fi password modification
(1)Connect your PC to 434T via WiFi ,in the WEB browser input :192.168.169.1,cl ick
“W IF I ” i con,input password:admin,enter into WIFI management set t ing
7

(2)Select the encrypt ion mode in “ Security Mode”,and set WIFI key.
8

(3)After set t ing,cl ick “Apply ” but ton,then 434T wi l l restar t ,connect your PC to
434T again.
2.4 Default factory setting
When you reset 434T it will be factory status. default IP :192.168.169.1 ,password :
admin, Internet access mode: Smart SSID:3Grouter_xxxx。
① Power 434T,then 434T start and blue l ight f lash (3s/t imes).
② Press ” WPS ” but ton unt i l 5—10s,then re lease,i f status ind icator l ight i s blue
9

f lash( 1s/t imes),i t means “ r eset ” success,then 434T wi l l res tar t .
Chapter III Internet access mode setting
3.1 3G
3.1.1 Insert the SIM card
Warning Before inserting or removing the SIM card, you must disconnect the device
from the power adapter.
If you are required to enter the PIN code,enter the correct one. If you fail to enter
the correct PIN or PU code, the network-related functions are unavailable. The SIM
card is supplied by the service provider. For details, contact your service provider.
Insert the card into the slot completely as shown in the following figure.
To remove the card press the card gently. Now the card will pop up automatically.
3.1.2 Connect to a PC
If the indicator of the Ethernet interface connecting with a network cable is on the
connection is successful. The Ethernet cable cannot be longer than 100 meters (328 feet).
To achieve better effect use the shielded cable.
10

3.1.3 Connect to a telephone set
The communication quality of the telephone set can be interfered by the wireless signal.
Place the telephone set one meter away from the device.
3.2 ADSL
(1)Power 434T put ADSL LAN cable into 434T WAN port (No.1).
(2)Connect your PC to 434T via WIFI in the Web browser input IP :192.168.169.1 then
input admin password: admin a session re jected (as below) ,th is t ime you can
input your ADSL account info then cl ick “ OK ” 。Ps:i f your ISP require bound MAC
address you need to input corresponding MAC.
3.3 DHCP(Hotel)
(1)Power 434T connect the cable in hote l or modem LAN to 434T WAN port .
(2)Connect your PC to 434T v ia WIFI
3.4 STATIC IP(Campus)
(1)Power 434T connect LAN from modem to 434T WAN port.
(2)Connect your PC to 434T via WIFI in the Web browser input: 192.168.169.1
password: admin,cl ick “ Ne twork set t ing—WAN ” ,set WAN mode:STATIC IP
(3)Input IP address and gateway info from ISP under the STATIC IP mode Webpage. Then
click “Apply” button.
11

(4)When 434T status indicator light is blue(always) it means connection success and
internet available.
3.5 WIFI Hotspot
(1)Power 434T connect your PC to 434T via WIFI
(2)In Web browser input: 192.168.169.1 password: admin click “Network setting-
WAN” make WAN mode be “WIFI”.
(3)In WIFI Hotspot setting Webpage click “Get Aplist in the air” select SSID you know. If
the wireless network is encryption please input WIFI password then click “Apply”
button. If WIFI hotspot is bound MAC please start MAC clone and input bound MAC
address.
(4)When the status indicator light is blue(always) it means dail number success and
internet available.
12

Chapter Ⅴ Software feature
Login GUI of 434T,you can make some set t ings.
13

:Check and conf igue the basic info of wire less network
:Login the status Webpage,check the in ternet access mode connect ion and net
f low ect .
:When ADSL i s current access mode,you can input account and password f rom your
operator .
:When put t ing 3G USB Modem according to SIM and current network requ i rement you
can input PIN and APN f rom your operator
5.1 Internet settings
5.1.1 WAN
There are five online methods (STATIC DHCP PPPOE (ADSL) 3G. WIFI in WAN mode.
14

5.1.1.1 STATIC Mode
The superior equipment is router or others; you need to enter fixed IP address provided by
ISP.
IP address: Static IP address provided the ISP.
Subnet mask: Provided by ISP.
Default Gateway:Fi l l in the gateway address as provided by the ISP.
Primary DNS Server:Fi l l in the DNS server as prov ided by the ISP. Different
areas have dif fe rent DNS addresses.
Secondary DNS Server :Fi l l in the DNS server as prov ided by the ISP.
Dif ferent areas have dif ferent DNS addresses.
5.1.1.2 DHCP Mode
The superior equipment is router; you can acquire IP address from ISP and access internet
without filling any content.
Obtain IP and DNS information relating to the extranet ports from the DHCP server and make
15

sure that the extranet ports connect to DHCP server. You can choose not to fill in the
Hostname.
5.1.1.3 PPPO (ADSL) Mode
Superior equipment is modem or optical fibre; you need to enter user name and password
appointed by ISP.
16

User Name: Fill in the Internet access account as provided by the ISP. Please place
enquiries on the ISP in case of any queries.
Password: Fill in the password as provided by the ISP. Please place enquiries on
the ISP in case of any queries.
Operation modes: Divided into “Keep Alive” connection “Manual” connection and
“On Demand” connection.
Manual :se lcet th is opt ion you need to dai l no manual ly when the in te rnet
connect ion i s shut-down.
On Demand: when the network visit is required from LAN ,i t wi l l connect
automat ica l l y 。 I f there is no any network requ i red with in set t ing
t ime( le isure) ,i t wi l l disconnect automat ica l l y (no disp lay disconnect in
17

status webpage) 。 This mode is sui tab le for the user who pay according to the
in ternet us ing t ime and save the cost .
5.1.1.4 3G Mode
Use 3G wireless data card
3G Run Type: ⑴、Under the “ Keep Al ive ” mode the router wi l l dia l up
automat ica l ly and get connected to the In te rnet when 3G equipment is plugged in .
⑵、Under the “Manua l ” mode the access in ternet th rough dia l-up wi l l not be
launched unt i l the user c l icks “ Connect ion ” on the status page. ⑶、Under the
“On-Demand ” mode the system wi l l be connected to the network automat ical ly in
case of WAN access requests. I f there are no network access requests with in the
speci f ic per iod ( id le t ime) the system wi l l disconnect to the network
automat ica l ly . This connect ion mode could effect ive ly save network access fees for
users that select to make payment by the t ime actua l ly consumed.
18

PIN settings: If your SIM/USIM/UIM card has a PIN code you shall select “Use PIN”
and fill in the PIN code in the following Input Box otherwise you shall select “Unused
PIN”.
APN :I f you se lect “ Au tomat ic APN ” then informat ion such as “ APN
In format ion ” “ D ia l Number ” “ User ” and “ Password ” sha l l be f i l led by the
router automat ica l ly . I f you se lect “Manual APN ” then you have to f i l l in such
In ternet access informat ion by yoursel f .
DNS type: If you select “Automatic DNS” the router will use the DNS obtained by 3G
dial-up. If the “Manual DNS” is selected the router will use the DNS information entered
by the user.
Net Backup: If you slect “3g back” means 434T supports failover when 3g
disconnect it will dial no through ADSL/DHCP for internet prepare.
5.1.1.5 WIFI
Make WIFI as in ternet access mode you can grasp the near WIFI hotspot for WIFI repeater .
Click “ Get Aplist from air”
Input WIFI key
MAC Clone :I f in ternet access mode i s ADSL i t maybe need bound MAC address
19

5.1.2 LAN
IP address: Set up IP addresses for Intranet ports
Subnet mask: Set up masks for the Intranet.
MAC address: Indicated physical addresses of the Intranet ports.
DHCP type: Select “Server” to open DHCP services and then the host in the Intranet
could obtain IPs dynamically.
Start IP address- nd IP address: IPs obtained by the host in the Intranet via DHCP
mode is included in this range.
5.1.3 Static Routing
This function may be used when it is required to add a specific routing for a certain host.
The proper use of static routing could reduce routing issues alleviate the overload of routing
data flows and enhance the transmission speed for the data packets. A routing item may be
identified by setting targeted IP address subnet mask and gateway address among which
the targeted IP address and the subnet mask are used to identify a target network/host.
Afterwards the router transmits the data packets to the designated target network/host via
the gateway.
20
Table of contents