Hammerhead 950MS User manual

950MS
HAMMERHEAD
CLEANING EQUIPMENT COMPANY
R
HammerheadClean.com
Easy to Use
Efficient
Economical
ENGINEERED SIMPLICITYTM
User Manual

1
EXPLODED VIEW OF MACHINE
 
 
 

 
 
 
 
 

 
 
 
 
TECHNICAL DESCRIPTION









2










 
 
 
 
 
 
 
 
 
 
 
 
 
 

2
STANDARD PRODUCTS AND SPARE PARTSIN THE BOX
Sweeper Bod yHandle- 1 P cFront Brush- 2 P cs
Turning Kno b - 2 Pcs Bolt- 2 Pcs Screw- 6 Pcs
Wrench Phillips Screwdriver Instruction Manu al

3
NOTE
SAFETY WARNING!
1. When sweeping and operating the machine in front of children, please be extremely careful and remain
aware of your surroundings.
2. Please do not use the unit as a toy for children.
3. Please do not let your hair, feet, clothes, etc. of your body get caught in the garbage collecting mouth of the
unit.
4. Please do not operate the sweeper barefoot or wearing footwear that exposes your feet.
5. Please do not sweep hot, burning or smoking debris in order to avoid any fire hazard or personal injury.
6. Please do not collect flammable and explosive or poisonous material.
7. When collecting any shards of glass or other sharp and potentially hazardous materials, please wear safety
gloves.
8. Please do not operate and store the unit close to heating source.
9. Please store the unit in a safe place to avoid any unintentional damage.
10. Please use sturdy gloves when removing glass, metal or other materials from the dirt container.
1. This unit is designed for outdoor and hard flooring. Home carpet may not be suitable for use with this
machine.
2. Before use, make sure the unit is in good and safe working condition.
3. The sweeper is not suitable for sweeping up liquids. Do not sweep up burning or glowing objects (e.g.
cigarettes, matches or similar).
4. Heavy stones and large size debris may be unable to be collected.
5. Please lift the two side brushes when cleaning high levels of dust.
6. Please avoid sweeping up long rope or like material to avoid brushes tangling and being damaged. If
this happens, remove by reversing the roller brush (see image below).

4
HOW TO USE
1. Take out the brushes from the debris container and screw
on the brushes.
2. Remaining screws are used with the knobs to
adjust the handle.
3. Three- position adjustable handle is in place for
maximum operator comfort and convenience.
4. Adjustable roller broom height with 6 different positions.
5. Easy to adjust front brush pressure for outstanding
sweeping performance.
6. Adjustable side broom swings out of the way when use
is not required.
3x
Pull out the adjusting
lever to the required
position

5
EMPTY THE HOPPER AND HOW TO REMOVE COMPONENTS
GROUND LIP
Unscrew all retaining screws.
The ground lip can then be
taken out.
1. Lift the debris container handle and detach the hopper.
2. Collect the hopper and empty in the appropriate waste container.*
*NOTE: DO NOT POUND HOPPER AGAINST WASTE RECEPTACLE. Doing so may
result in damage to the hopper or the receptacle.
REAR SKIRTING
Unscrew all retaining screws.
The rear skirting can then be taken out.
SKIRTING
Unscrew all retaining screws.
The rear can then can be taken out.
MAINTENANCE
1. The broom can be cleaned with water. Avoid using hot water or heat air
blowing.
2. Sweeper body can be cleaned with water. Avoid having it in direct sunlight
for long periods of time.
3. Spool cords and threads must be removed for best results.
As this machine is used regularly, ensure you tighten, every now and then, the
front caster (shown) with our specially-made wrench (included with machine).
Avoid having looseness in the wheel or worse, have it fall off while in operation.

6
WHEEL
1. Use a screwdriver to un-clip the cap cover in the middle of the wheel.
2. Use wire cutting pliers to disconnect and remove the lock washer.
3. The lock washer is broken when removed. A new lock washer must be used to
reinstall the wheel.
4. The wheel can be pulled off the axle.
ROUND BELT
When installing the drive belt, pay attention to the rotational direction of the side brush. When moving
forward, the side brush must rotate towards the inside.
OPERATION
1.Hand push action. Extremely easy to use. Normal walking speed is
recommended.
2. Ideal for cleaning paths, halls, sidewalks and warehouses quickly and
conveniently.
3. Suitable for fine dust and small pieces, like sand, grain, nails, bolts,
sawdust and papers.
4.The cleaning surface should be completely flat or a height difference of
</= 2.5cm. Walking the step in the opposite direction </== 19cm.

7
STORAGE
Space Saving Storage.
Folds completely for convenient storage.
PROBLEMTREATMENT
Fault Solution
Unsatisfactory Sweeping Results
A
Empty debris container.
Adjust height of the main broom/clean/replace.
Adjust height of the side brushes and clean/replace.
Check/replace the drive belt for side brush.
PARTS REPLACEMENT
MAIN BRUSH
1. To dismantle the main brush, unscrew all (6-9) retaining screws.
2. The two main brush half-shells can then be taken out.
FINE FILTER CLEAN
AND REPLACEMENT
Pull out the retaining pin and remove the
filter for cleaning or replacement.
4.

950MS Specs and NOTES
MODEL 950MS
WEIGHT 23.8kg
BATTERIES None
DRIVE Manual forward and reverse belt drive system
WORK RATING 3,680 square meters per hour
MAINBROOM PATH 920mm
MAX. GRADIENT N/A
SPEED Manual
CAPACITY 40L
SWEEPING SYSTEM Double round brush, and one roller brush
DIMENSIONS 1300X790X1035mm
SAVE ROOM Can be folded
PACKAGE CARTON
PACKAGE DIMENSIONS 890X810X400mm
APPLICATION Indoor, Outdoor

[email protected]
HammerheadClean.com
ENGINEERED SIMPLICITYTM
CONTACT US