7
Hose Assembly & Weights
Important
The exclusive three-year warranty is only
valid if the machine is operating with
genuine Hammer Head hose.
N.B. Hammer Head hose is specially
constructed for optimum performance
and is protected by a three-year warranty
against factory defect.
Twist and push the female ends to the
male after dipping the ends into the pool to
wet them. Push until the hose fits snugly.
Do not force the hoses on, as this will
hamper dismantling. Continue until you’ve
connected all the sections you need.
The Hammer Head hose sections which
must be assembled by connecting together
as many hose sections as needed to reach
from the skimmer/weir to the farthest point
of the pool, plus one section or plus two
sections if your skimmer/weir is located at
the center of your pool.
N.B. The leader hose will be considered the
extra length hose needed to reach from the
weir to the farthest corner. As this hose is
connected to the pool cleaner.
Hose must equal longest stretch plus one
length
