PAGE 1 OF
REV.
TOOL BOX
BUL10369
A
1
5-350D/5-525D - SERIES
ASSEMBLY INSTRUCTIONS FOR
STEEL CHASSIS ITH PANEL
HAMMOND
MANUFACTURING
TM
ELECTRONICS GROUP
visit our website @
www.hammondmfg.com
ASSEMBLY INSTRUCTIONS:
A) Select the height at which to mount the steel chassis (item 1) on
the combination rails (item 7).
B) If mounting rails have square cutouts insert 4 or 8 cage nuts (item
) on the mounting rail to suit the spacing of the mounting slots.
This can be done using a cage nut insertion tool. (Detail B)
C) Line up the mounting slots of the steel chassis (item 1) with the
holes (or cage nuts just inserted) on the combination rail (item 7).
Secure with 10-32 x 3/8 screws (items 3) provided with the chassis.
(Detail A & B)
D) Once the chassis is secure line up the mounting slots on panel with
the holes in the chassis. Secure the panel with screws and washers
(items 4 & 5) purchased for the combination rails. (Detail A).
#2 Phillips Head
Screw Driver
A
DETAIL A
B
DETAIL B
COMPLETE ASSEMBLY
Flat Head Screw
Driver
1
2
6
ITEM No. DESCRIPTION QTY
1STEEL CHASSIS 1
2STEEL PANEL 1
310- 2 X /8 SCREWS 2 OR 4
4SCREWS (NOT INCLUDED) 2 OR 4
5WASHERS (NOT INCLUDED) 2 OR 4
6CAGE NUTS (NOT INCLUDED) 4 OR 8
7COMBINATION RAILS (NOT INCLUDED) 2
PARTS LIST
4
5
7
7
1
2
