HAMPTON BAY 528 299 User manual

Page 1
INSTRUCTION MANUAL
Floor Lamp
Home Depot SKU 528 299
(UPC 798919360062)

Page 2
Thank you for purchasing this Hampton Bay interior
portable luminaire. This product has been manufactured
to the highest standards of safety and quality. The
durable finish and shade design provide for care-free
maintenance. Simply wipe with a clean towel to keep
looking new.
FEATURES:
1. Provides three adjustable lights.
2. Lamp holder may be fitted with a CFL equivalent
energy-saving bulb(s).
QUESTIONS, PROBLEMS, MISSING PARTS:
Before returning to your local Home Depot, please call
our Customer Service Team at 1-877-527-0313 or visit
www.homedepot.com. Please reference your SKU
528 299 (UPC 798919360062) Floor Lamp when
speaking to a Customer Service agent.
CAUTION:
1. Before starting to assemble your portable luminaire,
spread all parts out on a clean flat surface. Inspect each
part for defects that may have occurred during shipping.
Be careful when unpacking the lamp since the wires are
connected. If the wires are pulled out of their connectors,
it may result in a bad connection.

Page 3
Important: Inspect the wire insulation for any cuts,
abrasions or exposed copper that may have resulted
during shipping. If there is a defect in the wire, DO NOT
continue the assembly operation. Please call our
Customer Service Team at 1-877-527-0313.
2. CONSULT A QUALIFIED ELECTRICIAN IF YOU
HAVE ANY ELECTRICAL QUESTIONS.
3. Keep your receipt and these Instructions for Proof of
Purchase.
4. This portable lamp has a polarized plug (one blade is
wider than the other) as a safety feature to reduce the risk
of electric shock. This plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified
electrician. Never use with an extension cord unless plug
can be fully inserted. Do not alter the plug. CAUTION:
TO PREVENT ELECTRIC SHOCK MATCH WIDE
BLADE OF PLUG TO WIDE SLOT AND FULLY
INSERT.

Page 4
A
B
C
D
H
E
F
shadeholder
cup
PARTS INCLUDED FOR ASSEMBLY (parts are not
to scale):
1 ea –Base
(A)
3 ea –Poles
(B-D)
3 ea -Shade
(F)
1 ea –Pole
(E)

Page 5
ASSEMBLY INSTRUCTIONS:
1. Begin assembly at the bottom of the lamp.
2. Insert lamp pole (B) into base (A) and turn clockwise to
tighten.
3. Insert lamp pole (C) into lamp pole (B) and turn
clockwise to tighten.
4. Repeat above step with poles D and E. Gently pull any
excess cord from point (H) so that the parts fit.
5. Attach shade (F) to the shadeholder cup by aligning the
open end of the recessed groove on the shade with the
securement bump of the shadeholder cup. Slide the shade
inside the cup and turn clockwise until it locks into place.
6. Install (3) type A 60W maximum bulbs or (3) 13W
maximum CFL bulbs (bulbs not included). Do not use 3-
way bulbs or halogen bulbs in this fixture.