HAMPTON BAY YJAF-052-C User manual

Item # 000 000 000
Model # YJAF-052-C
USE AND CARE GUIDE
11 FT LEDOFFSET SOLAR UMBRELLA - SUNBRELLA HENNA
Questions, problems, missing parts?
Before returning to the store call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
NOTPMAH-DH-558-1
HAMPTONBAY.COM
THANK YOU
We appreciate the trust and you have placed in Hampton Bay through the purchase of this umbrella. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!

2
Table of Contents
Table of Contents..........................................................2
Safety Information ........................................................2
Product Caution.......................................................................2
Safety Warnings ......................................................................2
Pre-Assembly ................................................................ 3
Planning Assembly ..................................................................3
Hardware Included...................................................................3
Package Contents ....................................................................4
Operation ...................................................................... 18
Care and Cleaning ....................................................... 24
Safety Information
Assembly ....................................................................... 5
Warranty
2 YEAR FRAME AND FABRIC WARRANTY
WHAT IS COVERED
We warrant the frame and fabric to befree of manufacturing defectstothe original purchaser for two years.
WHATIS NOTCOVERED
It remains the customer’sresponsibility for freight and packaging chargestoand from our servicecenter. This warrantydoes not cover
s warranty.
We reserve the right to make substitutions with similar merchandise, if themodel in question is no longer in production.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HamptonBay.com. For more detailsregarding the limited
warranty offer, please see last page or use and care guide.
PRODUCT CAUTION
This umbrella was made for the explicit purpose of providing outdoor functions and is not to be used as a toy. This product is intended for
normal outdoor use; however, the manufacturer recommends storing and / or covering this set when any formidable / severe weather is
uct. Children
under the age of 10, near the product, should be supervised by a competent adult at all times. This product is NOT intended for commercial
use and will void the warranty.
SAFETY WARNINGS
WARNING: Please keep children out of the assembly area
before assembly.
WARNING: This umbrella unit is heavy, and may require
two adults for safe assembly.
CAUTION: Always close and secure the product when not
in use and in the event of inclement weather.
CAUTION: Never use the umbrella in high wind conditions.
Damage to the umbrella can occur.
!
!
CAUTION:
product at all times.
!
WARNING: Never use this product as a support. Do not
shake, lean, or climb on the product at any time.
Warranty.........................................................................2
What is Covered.......................................................................2
What is Not Covered ................................................................2

3
Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-
abrasive surface such as carpet or cardboard.
NOTE: More than one person may be required to
complete the assembly of this product.
H
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA BB CC
Part Description Quantity
AA
BB
CC
DD
EE
FF
M8x20 Hex bolt
M8 Washer
M5x8 Bolt
Wrench
Hex wrench S3
Hex wrench S4
4+1
4+1
2+1
1
1
1
DD EE
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
FF

IUpper base cover
1
JSupport tube rim
2
KCorner connector
4
LSide panel
2
MLock panel
2
NSand bag
1
OLong wire
4
Pre-Assembly (continued)
PACKAGE CONTENTS
4
Part Description Quantity
A
Lower bracket
1
BUpper bracket
1
CLower umbrella pole
1
DKnob
1
ESolar receiver
1
FCrank
1
GUmbrella shade
1
HLower base cover
2
Part Description Quantity
P
4
Short wire
C
K
K
K
K
M
M
LL
N
NH
H
J
J
I
B
A
E
G
D
F
O
P
P
P
O
O
O

5
Assembly
1
Attaching the brackets
Attach the upper bracket (B) onto the lower bracket (A).
NOTE: This umbrella should be set up in its desired
location to avoid moving it after assembly.
B
A
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

6
Assembly (continued)
2
Attaching the lower umbrella pole to the brackets
Attach the lower umbrella pole (C) to the upper bracket (B) and lower bracket (A) using M8x20 hex bolts (AA)
and M8 washers (BB).
C
BB
AA
DD
AB
NOTE: Fully tighten all bolts using the wrench (DD).

7
Assembly (continued)
3
Inserting the corner connectors
Insert the corner connectors (K) into the four ends of the assembled brackets.
K
KK
K
K
HAMPTONBAY.COM
.ecnatsissarehtrufrof1-855-HD-HAMPTONtcatnocesaelP

8
Assembly (continued)
4
Sliding the lock panels
Slide the perforated lock panels (M) downward between the corner connectors (K).
M
M
K
K
K
K

9
Assembly (continued)
5
Sliding the side panels
Slide the side panels (L) downward between the corner connectors (K).
Connect the two pieces of the support tube rims (J).
Slide the support tube rims (J) down the lower umbrella pole (C) and connect it to the brackets (A and B).
Insert the long wires (O) and the short wire (P) into the hole on the brackets as shown below.
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
L
M
L
J
J
K
K
K
K
C
A
O
P
B
P
O
3
2
1

10
Assembly (continued)
6
Placing the sand bag
Place the sand bag (N) in the umbrella base.
N
NOTE: Place the base in the area where the umbrella
is to be used. The umbrella will be very heavy after
lled with sand.

11
Assembly (continued)
7
Filling the sand bag
Pull to open the velcro pouch on the sand bag (N) and ll with sand.
NOTE: The sand bags (N) are to be lled with sand only.
NOTE: For proper stability of the offset umbrella,
please place 100 lbs of sand into each sand bag for
a total of 200 lbs.
After lling the sand bags (N), close the pouch and ensure the velcro is sealed.
Lock the two sections of the sand bags (N) together.
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
N
1
2

12
Assembly (continued)
8
Ensuring the locking mechanism is in the open position
Ensure the locking mechanism on the lock panel (M) is in the OPEN position by using the wrench (DD).
Attach the lower base cover (H) to the side panels (L).
DD
H
DD
L

Assembly (continued)
9
Locking the lower base cover
Lock the lower base cover (H) in place by turning the 12 locking mechanisms on the lock panel (M) to the CLOSE position using
the wrench (DD).
13
Attach the upper base cover (I) to the assembled base.
Close the lower base cover (H) and ensure they are fully closed.
H
DD
DD
M
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
I
3
12

14
Assembly (continued)
10
Attaching the locking knob to the lower umbrella pole
Attach the locking knob (D) to the lower umbrella pole (C) using the hex wrench S3 (EE) and M5x8 bolts (CC). Make sure the
locking knob (D) is placed as shown in gure (1) before attaching.
1
2
C
CC
EE
D
12
NOTE: When inserting the locking knob (D) into the hole,
make sure the two points of the locking knob t into
the two slots on the umbrella pole as shown below.

15
Assembly (continued)
11
Preparing the umbrella
Push the long bent tube of the umbrella shade (G) outwards a little while holding down the tap on the short bent tube to
make the hinge slide to snap into place as shown below.
HAMPTONBAY.COM
.ecnatsissarehtrufrof1-855-HD-HAMPTONtcatnocesaelP

16
Assembly (continued)
12
Attaching the solar receiver
Attach the solar receiver (E) to the umbrella shade (G) by turning the solar receiver (E) clockwise until
fully tightened.
Insert the plug into the plug hole of the solar receiver (E).
E
E
1
2
G
NOTE: Please leave the solar reciever (E) out in a sunny
area to charge before the rst time turning on the LED
lights.

17
Assembly (continued)
13
Inserting the umbrella shade into the lower umbrella pole
Rotate the locking knob (D) 180 degrees clockwise as shown in gure (1).
Insert the umbrella shade (G) into the lower umbrella pole (C) as shown in gure (2).
Rotate the locking knob (D) 180 degrees clockwise as shown in gure (3).
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
DC
G
G3
2
1
4
NOTE: If there is a gap in the locking knob (D) as
shown below in gure (3), please rotate the umbrella
shade (G) until it is completely locked as shown
in gure (4).

18
Operation
1
Attaching the crank
Attach the crank (F) to the handle as shown below.
Attach the crank (F) by aligning the tap with the hole on the crank (F) until it snaps into place.
To detach the crank, the wrench (EE) is required to press the tap to take the crank (F) out.
Attach the crank (F) without using the tap.
To detach the crank (F), just take the crank out.
NOTE: Both methods of attaching the crank (F)
are acceptable.
EE
F
2
1
2
1
F
2
1
01:
02:

19
Operation (continued)
2
Raising the umbrella
Loosen the knob on the umbrella shade as shown in gure (1) by turning it counterclockwise until it is fully loose.
Hold the umbrella handle and push the long bent tube upward as shown in gure (2) until it stops and the umbrella is fully extended.
Fully tighten the knob on the umbrella shade clockwise as shown in gure (3) to lock the handle in place.
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
1
2
3

20
Operation (continued)
3
Opening the umbrella
Undo the Velcro belt on the canopy and shake the canopy to separate the umbrella ribs.
Slowly turn the crank (F) clockwise to open the umbrella.
When the umbrella is fully open, fasten the belt under the hinge of the short bent tube to stabilize the umbrella. Make sure the belt is
tighten as shown in gure (3).
2
1
3
12