HAMPTON BAY YJAF052 User manual

Item #
Model #YJAF052
USE AND CARE GUIDE
11FT SOLAR LIGHTED OFFSET UMBRELLA
Questions, problems, missing parts? Before returning to the store call
Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday
1-877-527-0313
HOMEDEPOT.CA
THANK YOU
We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this umbrella. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!

2
Table of Contents
Table of Contents..........................................................2
Safety Information ........................................................2
Product Caution.......................................................................2
Safety Warnings ......................................................................2
Pre-Assembly ................................................................ 3
Planning Assembly ..................................................................3
Hardware Included...................................................................3
Package Contents ....................................................................4
Operation ...................................................................... 18
Care and Cleaning ....................................................... 24
Safety Information
Assembly ....................................................................... 5
Warranty
1 YEAR FRAME AND FABRIC WARRANTY
WHAT IS COVERED
We warrant the frame and fabric to be free of manufacturing defects to the original purchaser for one year.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, re, freezing, and abusive use. In addition, purchase parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Contact the Customer Service Team at 1-877-527-0313 or visit www.HOMEDEPOT.CA. For more details reguarding the limited
warranty offer, please see last page or use and care guide.
PRODUCT CAUTION
This umbrella was made for the explicit purpose of providing outdoor functions and is not to be used as a toy. This product is intended for
normal outdoor use; however, the manufacturer recommends storing and / or covering this set when any formidable / severe weather is
approaching. Do not locate the product near open ame. Do not use the product as a support. Do not shake, lean or climb on product. Children
under the age of 10, near the product, should be supervised by a competent adult at all times. This product is NOT intended for commercial
use and will void the warranty.
SAFETY WARNINGS
WARNING: Please keep children out of the assembly area
before assembly.
WARNING: This umbrella unit is heavy, and may require
two adults for safe assembly.
CAUTION: Always close and secure the product when not
in use and in the event of inclement weather.
CAUTION: Never use the umbrella in high wind conditions.
Damage to the umbrella can occur.
!
!
CAUTION: Keep all ame and heat sources away from this
product at all times.
!
WARNING: Never use this product as a support. Do not
shake, lean, or climb on the product at any time.
Warranty.........................................................................2
What is Covered.......................................................................2
What is Not Covered ................................................................2

3
Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-
abrasive surface such as carpet or cardboard.
NOTE: More than one person may be required to
complete the assembly of this product.
H
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA BB CC
Part Description Quantity
AA
BB
CC
DD
EE
M8x20 Hex bolt
M8 Washer
M5x8 Bolt
Wrench
Hex wrench
4
4
2
1
1
DD EE
HOMEDEPOT.CA
Please contact 1-877-527-0313 for further assistance.

IUpper base cover
1
JSupport tube rim
4
KCorner connector
2
LSide panel
2
MLock panel
2
NSandbag
2
OCanopy
2
Pre-Assembly (continued)
PACKAGE CONTENTS
4
Part Description Quantity
A
Lower bracket
1
BUpper bracket
1
CLower umbrella pole
1
DKnob
1
ESolar receiver
1
FCrank
1
GUpper umbrella pole
1
HLower base cover
1
Part Description Quantity
P
1
ON/OFF Switch
C
K
K
K
K
M
M
LL
N
NH
H
J
I
B
A
E
G
D
F
P
O

5
Assembly
1
Attaching the brackets
Attach the upper bracket (B) onto the lower bracket (A).
NOTE: This umbrella should be set up in its desired
location to avoid moving it after assembly.
B
A
HOMEDEPOT.CA
Please contact 1-877-527-0313 for further assistance.

6
Assembly (continued)
2
Attaching the lower umbrella pole to the brackets
Attach the lower umbrella pole (C) to the upper bracket (B) and lower bracket (A) using the M8x20 hex bolts (AA)
and M8 washers (BB).
C
BB
AA
DD
AB
NOTE: Fully tighten all bolts using the wrench (DD).

7
Assembly (continued)
3
Inserting the corner connectors
Insert the corner connectors (K) into the four ends of the attached brackets.
K
KK
K
K
HOMEDEPOT.CA
.ecnatsissarehtrufrof1-877-527-0313tcatnocesaelP

8
Assembly (continued)
4
Sliding the lock panels
Slide the perforated lock panels (M) downward between the corner connectors (K).
M
M
K
K
K
K

9
Assembly (continued)
5
Sliding the side panels
Slide the side panels (L) downward between the corner connectors (K).
Connect the two pieces of the support tube rims (J).
Slide the support tube rims (J) down the lower umbrella pole (C) and connect it to the brackets (A and B).
HOMEDEPOT.CA
Please contact 1-877-527-0313 for further assistance.
L
M
L
J
J
BA
K
K
K
K
C

10
Assembly (continued)
6
Placing the sand bag
Place the sandbag (N) in the umbrella base.
N
Place the umbrella base in the area where the umbrella is to be used. It will be heavy once lled with sand.

11
Assembly (continued)
7
Filling the sand bag
Pull open the velcro pouch on the sand bag (N) and ll with sand.
NOTE: The sand bags (N) are to be lled with sand only.
NOTE: For proper stability of your offset umbrella, the
minimum weight of the sand to be placed into each
sand bag is 100 lbs for a total of 200 lbs.
N
N
N
After lling the sand bags (N), close the pouch and ensure the velcro is sealed.
Lock the two sections of the sand bags (N) together.
HOMEDEPOT.CA
Please contact 1-877-527-0313 for further assistance.

12
Assembly (continued)
8
Closing the lid on the base
Ensure the locking mechanism on the lock panel (M) is in the OPEN position by using the wrench (DD).
Attach the bottom covers (H) to the side panels (L).
Close the bottom covers (H) and ensure they are fully closed.
DD
H
L
DD
M

Assembly (continued)
9
Locking the lower base cover
Lock the lower base cover (H) in place by turning the 12 locking mechanisms on the lock panel (M) to the CLOSE position using
the wrench (DD).
13
Attach the upper base cover (I) to the assembled base.
H
DD
DD
M
HOMEDEPOT.CA
Please contact 1-877-527-0313 for further assistance.

14
Assembly (continued)
10
Attaching the knob
Attach the knob (D) to the lower umbrella pole (C) using M5x8 bolts (CC).
NOTE: Fully tighten all bolts using the hex wrench (EE).
C
CC
EE
D

15
Assembly (continued)
11
Preparing the umbrella
Push down and pull the hinge to prepare the upper umbrella pole (G) as the picture shows.
G
G
HOMEDEPOT.CA
.ecnatsissarehtrufrof1-877-527-0313tcatnocesaelP

16
Assembly (continued)
12
Attaching the solar reciever
Attach the solar receiver (E) to the top of the upper umbrella pole (G) by turning the solar receiver (E) clockwise until
fully tightened.
Insert the plug into the plug hole of the solar receiver (E).
E
E

17
Assembly (continued)
13
Inserting the umbrella into the pole
Insert the upper umbrella pole (G) into the lower umbrella pole (C).
Rotate the knob (D) clockwise to secure the upper umbrella pole (G) to the lower umbrella pole (C).
D
D
C
G
G
HOMEDEPOT.CA
Please contact 1-877-527-0313 for further assistance.

18
Operation
1
Attaching the crank
Attach the crank (F) to the handle as shown below.
NOTE: Align the holes on the crank (F) to the handle
and it will lock. If the holes are not aligned, the crank
(F) will be easy to take out. To take the crank (F) out,
insert the hex wrench (EE) into the same hole and pull.
2
1

19
Operation (continued)
2
Raising the umbrella
Loosen the knob on the handle as shown in gure (1) by turning counterclockwise.
Slide the umbrella handle upward as shown in gure (2) until it stops and the umbrella is fully extended.
Tighten the knob on the handle clockwise as shown in gure (3) to lock the handle in place.
HOMEDEPOT.CA
Please contact 1-877-527-0313 for further assistance.
1
2
3

20
Operation (continued)
3
Opening the umbrella
Release the belt on the canopy (O).
The crank handle must be on top of the pole, in the up position, prior to opening the umbrella. Slowly turn the crank
clockwise to open the umbrella.
When the umbrella is open, fasten the belt around the pole to stabilize the umbrella.