HAMPTON BAY YJAF-819C-Chili User manual

Model # YJAF-819C-Chili
10 FT X 10 FT SQUARE OFFSET UMBRELLA
Item # 1003 348 689
USE AND CARE GUIDE
THANK YOU
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improv
ually create
ement needs.
Thank you for choosing Hampton Bay!
1-855-HD-HAMPTON
HAMPTONBAY.COM
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service.
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1003 348 769
YJAF-819C-Café

2
Table of Contents
Table of Contents...................................................... . 2.
Warranty .................................................................... ..
What is Covered......................................................................
2
2
What is Not Covered................................................................ 2
Assembly.........................................................................5
Operation........................................................................
Care and Cleaning.........................................................
12
16
Pre-Assembly........................................................................... 3
Planning Assembly...................................................................
3
Hardware Included................................................................... 3
Package Contents...................................................................... 4
Safety Information
PRODUCT CAUTION
Safety Information ................................................................ 2
Product Caution ...
...................................................................
2
Safety Warnings ...................................................................... 2
SAFETY WARNINGS
This umbrella was made for the explicit purpose of providing outdoor functions and is not to be used as a toy. This product is intended for
normal outdoor use; however, the manufacturer recommends storing and / or covering this umbrella when any formidable / severe weather
n the
product. Children under the age of 10, near the product, should be supervised by a competent adult at all times. This product is NOT
intended for commercial use and will void the warranty.
Warranty
2 YEAR FRAME AND 2 YEAR FABRIC WARRANTY
WHAT IS COVERED
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, fire, freezing, and abusive use. In addition, purchase parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HamptonBay.com.
We warranty the frames to be free of manufacturing defects to the original purchaser for two years, and a two year limited warranty for the fabric.
WARNING: Please keep children out of the assembly area
before assembly.
WARNING: This umbrella unit is heavy, and may require
two adults for safe assembly.
CAUTION: Always close and secure the product when not
in use and in the event of inclement weather.
CAUTION: Never use the umbrella in high wind conditions.
Damage to the umbrella can occur.
!
!
CAUTION: Keep all flame and heat sources away from this
product at all times.
!
WARNING: Never use this product as a support. Do not
shake, lean, or climb on the product at any time.

3
Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
Part Description Quantity
BB M6x15 bolt 1+1
CC M10x22 combination bolt 4+1
DD M10x25 combination bolt 4+1
EE M10 hex wrench 1
FF
M6 hex wrench 1
AA M6x10 bolt 1+1
AA BB CC DD
EE FF
NOTE: More than one person may be required to
assemble this product.
NOTE: Hardware not shown to actual size.
HARDWARE INCLUDED
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

4
PACKAGE CONTENTS
Part Description Quantity
1
1
1
D Lower umbrella pole 1
E Crank 1
F Umbrella shade 1
A
B
C
Lower bracket
Upper bracket
Base tube
1
1
2
2
J Middle base
K Upper base cover 1
L Lower base cover 1
G
H
I
Pedal
Turn plate
Side base
Pre-Assembly (continued)
J
I
J
I
K
L
C
H
G
A
B
F
E
D

5
Assembly
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
1Pouring Sand and Water into the Bases
Open the side bases (I) and the middle bases (J) in the counterclockwise direction.
Pour sand and water into the side bases (I) and the middle bases (J).
Close the side bases (I) and the middle bases (J) in the clockwise direction.
SAND
OPEN
WATER
CLOSE
NOTE: For proper stability of the offset umbrella, please place 330.69 lb/150 kg
in total of water and sand into the bases, or place at least 220.46 lb/100 kg
total of water into the bases.
NOTE: Place the bases in the area where the umbrella
is to be used. The umbrella will be very heavy after
filled with sand and water.
NOTE: The bases are OK to be filled with sand and
water or can be lled with just water.

6
Assembly (continued)
2Attaching the Brackets
Attach the upper bracket (B) onto the lower bracket (A).
B
A

7
Assembly (continued)
3Attaching the Turn Plate to the Brackets and the Base Tube to the Turn Plate
Pull out the lower umbrella pole (D) from the base tube (C).
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
FF
AA
G
H
Attach the pedal (G) to the turn plate (H) using M6x10 bolt (AA) and the M6 hex wrench (FF).
D
C
A
EE
DD
C
B
CC
EE
H
Attach the base tube (C) to the turn plate (H) using M10x22 combination bolts (CC) and the M10 hex wrench (EE).
Attach the turn plate (H) to the brackets (A and B) using M10x25 combination bolts (DD) and the M10 hex wrench (EE).
Fully tighten all the bolts at this step.

Assembly (continued)
8
4Attaching the Middle Bases to the Brackets
Attach the middle bases (J) onto the brackets (A and B).
JJ

Assembly (continued)
9
5Attaching the Side Bases to the Brackets
Attach the side bases (I) to the brackets (A and B).
I I
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

Assembly (continued)
10
6Inserting the Lower Base Cover, Upper Base Cover and Lower Umbrella Pole
into the Base Tube
Insert the lower base cover (L) into the base tube (C).
Insert the upper base cover (K) into the base tube (C).
Insert the lower umbrella pole (D) into the base tube (C).
L
C
K
D
D
C

Assembly (continued)
11
7Inserting the Umbrella Shade into the Base Tube
Insert the umbrella shade (F) into the base tube (C) using one M6x15 bolt (BB) and M6 hex wrench (FF).
F
BB
FF
C
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Fully tighten all the bolts at this step.

Operation
12
1Attaching the Crank to the Handle and opening the Umbrella
Shake the umbrella fabric before opening the umbrella.
E
F
BUTTON
Attach the crank (E) to the handle.
Slowly turn the crank (E) clockwise to open the umbrella, press the button on the handle, hold the handle and push the
umbrella shade to the desired position.

Operation (continued)
13
2Rotating the Umbrella
Hold the pedal (G) with one foot and rotate the umbrella pole. (The umbrella can rotate up to 360 degrees).
360°
G
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

Operation (continued)
14
3Adjusting the Umbrella
BUTTON
If you need to adjust the umbrella shade position, press the button on the handle and push up or push down to desired position.

Operation (continued)
15
4Closing the Umbrella
1
2
BUTTON
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Slowly turn the crank (E) in a counterclockwise direction to close the umbrella.
Hold the umbrella handle, and press the button on the handle,and push the umbrella shade downward.
Tie the umbrella to the umbrella pole with the Velcro
® belt when not in use, as shown below.

Operation (continued)
5
Attach the crank (E) without using the tap as shown in figure 1. To detach the crank (E), just take the crank out.
Attach the crank (E) to the handle as shown in figure 2. Attach the crank (E) by aligning the tap with the hole on the crank
(E) until it snaps into place. To detach the crank, the hex wrench (FF) is required to press the tap to take the crank (E) out.
Care and Cleaning
For best results, clean the umbrella with damp cloth and dry thoroughly. This will help prevent mildew by removing dirt
particles that may accumulate.
Do not clean with abrasive materials, bleach, or solvents.
Store the umbrella in a sheltered place when not in use.
ind.
16
1.
2.
1.
2.
Attaching and Detaching the Crank
Figure 1
Figure 2
Attach the crank without using the tap
Detach the crank without using the tap
Attach the crank
Detach the crank

Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service.
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
Retain this manual for future use.
1-855-HD-HAMPTON
HAMPTONBAY.COM