HAMPTON BAY YJAF052-A User manual

USE AND CARE GUIDE
11 FT. LED OFFSET SOLAR UMBRELLA
Questions, problems, missing parts? Before returning to the store
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this umbrella. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
Item # 1001 414 657
Model # YJAF052-A
1001 414 653
YJAF052-C

2
Table of Contents
Table of Contents..........................................................2
Safety Information ........................................................2
Product Caution.......................................................................2
Safety Warnings ......................................................................2
Pre-Assembly ................................................................ 3
Planning Assembly ..................................................................3
Hardware Included...................................................................3
Package Contents ....................................................................4
Operation ...................................................................... 18
Care and Cleaning ....................................................... 24
Safety Information
Assembly ....................................................................... 5
Warranty
2 YEAR FRAME AND 5 YEAR FABRIC WARRANTY
WHAT IS COVERED
We warrant to be free of manufacturing defects to the original purchaser for two year frame and ve year fabric.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, fire, freezing, and abusive use. In addition, purchase parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HamptonBay.com.
PRODUCT CAUTION
This umbrella was made for the explicit purpose of providing outdoor functions and is not to be used as a toy. This product is intended for
normal outdoor use; however, the manufacturer recommends storing and / or covering this umbrella when any formidable / severe weather
is approaching. Do not locate the product near open flame. Do not use the product as a support. Do not shake, lean or climb on product.
Children under the age of 10, near the product, should be supervised by a competent adult at all times. This product is NOT intended for
commercial use and will void the warranty.
SAFETY WARNINGS
WARNING: Please keep children out of the assembly area
before assembly.
WARNING: This umbrella unit is heavy, and may require
two adults for safe assembly.
CAUTION: Always close and secure the product when not
in use and in the event of inclement weather.
CAUTION: Never use the umbrella in high wind conditions.
Damage to the umbrella can occur.
!
!
CAUTION: Keep all flame and heat sources away from this
product at all times.
!
WARNING: Never use this product as a support. Do not
shake, lean, or climb on the product at any time.
Warranty.........................................................................2
What is Covered.......................................................................2
What is Not Covered ................................................................2 Maintenance .................................................................25

3
Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-
abrasive surface such as carpet or cardboard.
NOTE: More than one person may be required to
complete the assembly of this product.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA BB CC
Part Description Quantity
AA
BB
CC
DD
M8x20 combination hex bolt
M5x8 bolt
Wrench
Hex wrench
4+1
2+1
1
1
DD
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

IUpper base cover
1
JSupport tube rim
2
KCorner connector
4
LSide panel
2
MLock panel
2
NSand bag
1
Pre-Assembly (continued)
PACKAGE CONTENTS
4
Part Description Quantity
ALower bracket
1
BUpper bracket
1
CLower umbrella pole
1
DLocking knob
1
ESolar receiver
1
FCrank
1
GUmbrella shade
1
HLower base cover
2
Part Description Quantity
C
K
K
K
K
M
LL
N
NH
H
J
J
I
E
G
D
F
M
B
A
OReplacement LED light
4
PReplacement LED light cover
4
O
P

5
Assembly
1
Attaching the brackets
Attach the upper bracket (B) onto the lower bracket (A).
NOTE: This umbrella should be set up in its desired
location to avoid moving it after assembly.
B
A
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

6
Assembly (continued)
2
Attaching the lower umbrella pole to the brackets
Attach the lower umbrella pole (C) to the upper bracket (B) and lower bracket (A) using M8x20 combination hex bolts (AA).
NOTE: Fully tighten all bolts using the wrench (CC).
C
CC
AB
AA
AA

7
Assembly (continued)
3
Inserting the corner connectors
Insert the corner connectors (K) into the four ends of the assembled brackets.
K
KK
K
K
HAMPTONBAY.COM
.ecnatsissarehtrufrof1-855-HD-HAMPTONtcatnocesaelP

8
Assembly (continued)
4
Sliding the lock panels
Slide the perforated lock panels (M) downward between the corner connectors (K).
M
M
K
K
K
K

9
Assembly (continued)
5
Sliding the side panels
Slide the side panels (L) downward between the corner connectors (K).
Connect the two pieces of the support tube rims (J).
Slide the support tube rims (J) down the lower umbrella pole (C) and connect it to the brackets (A and B).
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
L
M
L
J
J
K
K
K
K
C
AB
2
1
NOTE: Please pay attention to the direction of Part (J).
J
M
J
M

10
Assembly (continued)
6
Placing the sand bags
Place the sand bags (N) in the umbrella base.
N
NOTE: Place the base in the area where the umbrella
is to be used. The umbrella will be very heavy after
filled with sand.

11
Assembly (continued)
7
Filling the sand bags
Pull to open the velcro pouch on the sand bag (N) and fill with sand.
NOTE: The sand bags (N) are to be filled with sand only.
NOTE: For proper stability of the offset umbrella,
please place 110 lbs of sand into each sand bag for
a total of 220 lbs.
After filling the sand bags (N), close the pouch and ensure the velcro is sealed.
Lock the two sections of the sand bags (N) together.
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
N
1
2

12
Assembly (continued)
8
Ensuring the locking mechanism is in the open position
Ensure the locking mechanism on the lock panel (M) is in the OPEN position by using the wrench (CC) as shown in figure 1.
Ensure the locking mechanism on the lower base cover (H) is in the OPEN position by using the wrench (CC) as shown in figure 2.
Attach the lower base cover (H) to the side panels (L).
Close the lower base cover (H) and ensure they are fully closed.
CC
H
CC
L
12
CLOSE POSITION
OPEN POSITION OPEN POSITION
CLOSE POSITION
CC
CC
M

Assembly (continued)
9
Locking the lower base cover
Lock the lower base cover (H) and the lock panel (M) by turning the locking mechanisms to the CLOSE position using
the wrench (CC) as shown in figure 1 and figure 2.
13
Attach the upper base cover (I) to the assembled base.
H
CC
CC
M
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
I
3
1 2
12
CLOSE POSITION
CLOSE POSITION
OPEN POSITION OPEN POSITION

12
14
Assembly (continued)
10
Attaching the locking knob to the lower umbrella pole
Attach the locking knob (D) to the lower umbrella pole (C) using the M5x8 bolts (BB) and hex wrench (DD). Make sure the
locking knob (D) is placed as shown in figure (1) before attaching.
NOTE: When inserting the locking knob (D) into the hole,
make sure the two points of the locking knob fit into
the two slots on the umbrella pole as shown below.
1
2
C
BB
DD
D

15
Assembly (continued)
11
Preparing the umbrella
Push the long bent tube of the umbrella shade (G) outwards a little while holding down the tap on the short bent tube to
make the hinge slide snap into place as shown below.
HAMPTONBAY.COM
.ecnatsissarehtrufrof1-855-HD-HAMPTONtcatnocesaelP
G

16
Assembly (continued)
12
Attaching the solar reciever
Attach the solar receiver (E) to the umbrella shade (G) by turning the solar receiver (E) clockwise until
fully tightened.
Insert the plug into the plug hole of the solar receiver (E).
E
G
NOTE: Please leave the solar receiver (E) out in a sunny
area to charge before the first time turning on the LED
lights.
1
2
E
1
2
G

17
Assembly (continued)
13
Inserting the umbrella shade into the lower umbrella pole
Rotate the locking knob (D) 180 degrees clockwise as shown in figure 1.
Insert the umbrella shade (G) into the lower umbrella pole (C) as shown in figure 2.
Rotate the locking knob (D) 180 degrees clockwise as shown in figure 3.
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
DC
G
G
NOTE: If there is a gap in the locking knob (D) as
shown below in figure 3, please rotate the umbrella
shade (G) until it iscompletely locked as shown
in figure 4.
1
3
4
2
C

18
Operation
1
Attaching the crank
Attach the crank (F) to the handle as shown in figure (1).
Attach the crank (F) by aligning the tap with the hole on the crank (F) until it snaps into place.
To detach the crank, the hex wrench (DD) is required to press the tap to take the crank (F) out.
Attach the crank (F) without using the tap as shown in figure (2).
To detach the crank (F), just take the crank out.
NOTE: Both methods of attaching the crank (F)
are acceptable.
EE
F
2
1
F
2
1
(1)
(2)

19
Operation (continued)
2
Raising the umbrella
Loosen the knob on the umbrella shade as shown in figure 1 by turning it counterclockwise until it is fully loose.
Hold the umbrella handle and push the long bent tube upward as shown in figure 2 until it stops and the umbrella is fully extended.
Fully tighten the knob on the umbrella shade clockwise as shown in figure 3 to lock the handle in place.
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
1
2
3

20
Operation (continued)
3
Opening the umbrella
Undo the Velcro belt on the canopy and shake the canopy to separate the umbrella ribs.
Slowly turn the crank (F) clockwise to open the umbrella.
When the umbrella is fully open, fasten the beltunder the hinge of the short bent tube to stabilize theumbrella. Make surethe belt is
tightened as shown in figure 3.
3
12
F