Instruction Manual
www.hannainst.com
Dear Customer,
Thank you for choosing a Hanna Product.
Please read the instructions carefully before using the
chemical test kit. It will provide you with the necessary
information for correct use of the kit.
Remove the chemical test kit from the packing material and
examine it carefully to make sure that no damage has
occurred during shipping. If there is any noticeable dam-
age, notify your Dealer or the nearest Hanna office
immediately.
Each kit is supplied with:
•HI 3886-0 pH 7.5-10.0 Reagent, 1 bottle with
dropper (25 mL);
•1 color comparator cube.
Note: Any damaged or defective item must be returned in
its original packing materials.
HI 3886
pH 7.5-10.0
Test Kit
ISTR3886R2 12/02-L PRINTED IN ITALY
pH represents acidity or alkalinity of an aqueous solution
and is proportional to the hydrogen-ion concentration of the
solution. Under neutral conditions water is dissociated into
the OH-and H+ions in equal ratio and hence it has a pH
of 7. When bases or acids are added to a water solution
they ionize, increasing the concentration of OH- or H+,
respectively. Thus solutions with a pH of 1-3 contain strong
acids, whereas those with a pH of 4-6 contain weak acids.
Weak bases result in solutions of pH 8-10 and strong bases
in pH of 11-13.
Examples of pH value for some liquids:
Liquid pH Value
sea water 7.8-8.2
gastric juices 1.7
milk 6.5-7
soil 6-7 (optimum for crops)
Range 7.5-10.0 as pH unit
Smallest Increment 0.5 as pH unit
Analysis Method Colorimetric
Sample Size 5 mL
Number of Tests 100
Case Dimensions 115x102x82 mm (4.5x4.0x3.2")
Shipping Weight 110 g (3.9 oz.)
SPECIFICATIONS
SIGNIFICANCE AND USE
CHEMICAL REACTION
HI 3886-0 Hanna Reagent reacts in contact with the
aqueous solution changing its color according to the hydro-
gen-ion concentration (pH) in the given range.
READ THE ENTIRE INSTRUCTIONS BEFORE USING THE KIT
•Note: always shake the reagent bottle before use.
• Fill the color comparator cube with 5 mL of
the sample.
• Add 5 drops of reagent HI 3886-0.
• Replace the cap and mix the
solution by inverting the
cube several times.
• Determine which color best
matches the solution in the cube
and record the result as pH unit.
• It is better to match the color with a white sheet at
about 10 cm behind the color comparator cube.
INSTRUCTIONS
REFERENCES
Vogel's
Quantitative Chemical Analysis
5th Ed.
Longman Scientific & Technical.
HEALTH AND SAFETY
The chemicals contained in this kit may be hazardous if
improperly handled. Read Health and Safety Data Sheet
before performing this test.
Note: in case of a concentration of chlorine above 50 ppm
require the HI 3886/O Test Kit.
To measure pH in the 4.0-6.5 range use the HI
3880 pH 4.0-6.5 Test Kit.
To measure pH in the 6.0-8.5 range use the HI
3881 pH 6.0-8.5 Test Kit.
