AIR-EAGLE®XLT
900MHz RF Receiver
OPTIONS & FREQUENCY SET-UP
This unit is shipped from the factory with the SEL1 switches in the open
positions. If you wish to change the default settings, follow the instructions
on the table below.
1) Remove power from unit and remove top cover.
2) Select desired relay operation and/or network frequency using table
below.
3) Reattach cover and apply power. Programming is now complete.
Relays #1 thru #8
maintained momentary
(default)
Relays #1 thru #8
toggle/latch
Maintained Momentary –Relay mimics button or input –when
depressed or closed, relay will be energized; when released, relay de-
energizes
Toggle Latch –Relay changes (and holds) its state each time the
corresponding button or input is depressed or closed.
Vibrating Feedback OFF
(default)
Relays respond to channel
1 thru 8 commands
(default)
Relays respond to channel
9 thru 16commands
GENERAL OPERATION
Relays #1 thru #8 energize or de-energize based on specific
commands from a handheld or contact input transmitter.
BUTTON OR
INPUT
ACTIVATED
Relay #1 energizes, maintained momentary
Relay #2 energizes, maintained momentary
Relay #3 energizes, maintained momentary
Relay #4 energizes, maintained momentary
Relay #5 energizes, maintained momentary
Relay #6 energizes, maintained momentary
Relay #7 energizes, maintained momentary
Relay #8 energizes, maintained momentary
SPDT 5 amp @ 120VACor 30VDC per
channel
Up to 2500 Feet w/Standard Antenna
Note: Max range figures are estimates, based on free-air terrain with limited sources of
interference. Actual range will vary based on transmitting power, orientation of transmitter and
receiver, height of transmitting antenna, height of receiving antenna, weather conditions,
interference sources in the area, and terrain between receiver and transmitter, including, but not
limited to, indoor and outdoor structures such as walls, metal objects, trees, buildings, hills, and
mountains.
Eight Independent Frequencies
Hinged fiberglass with window / NEMA 3,
3R, 4, 12, 13
Standard Antenna (Included):
900MHz TNC “Rubber Duck” Antenna
Mobile/Base Antennas –
Used to help achieve max range in both nonline of sight andline of
sight applications. - Contact BWI Eagle for recommendations
900MHz Thru-Hole Mount Mobile Antenna
900MHz Magnet Mount Mobile Antenna
900MHz Omni Directional Base Antenna
900MHz Yagi Directional Base Antenna
High Quality Coax Cables –
Used to connect external high gain antennas to control unit
Flex Coax Cable w/Connectors –Available in
5’,15’,25’,30’,40’,60’,80’,100’ Lengths
49-4000-XX
(XX = # of Feet)
Bulkhead Extensions –
Used to provide an external antenna connection whenmounting
control unit inside another enclosure
TNC Male to TNCBulkhead Cable Assembly
- Available in 2’, 4’, 7’ Lengths
49-5004-X-ISO
(X = # of Feet)
LIMITED WARRANTY STATEMENT
BWI Eagle Inc. warrants the Air-Eagle XLT Remote Control System, if properly
used and installed, will be free from defects in material and workmanship for a
period of 1 year after date of purchase. Said warranty to include the repair or
replacement of defective equipment. This warranty doesnotcoverdamage
dueto external causes, including accident, problems with electrical power,
usage not in accordance with product instructions, misuse, neglect, alteration,
repair, improper installation, or improper testing. This limitedwarranty, andany
implied warranties that may exist under state law, apply only to the original
purchaser of the equipment, and last only for as long as such purchaser
continues to own the equipment. This warranty replaces all other warranties,
express or implied including, but not limitedto, theimpliedwarranties or
merchantability and fitness for a particular purpose. BWI Eagle makesno
express warranties beyond those stated here. BWI disclaims without limitation,
implied warranties of merchantability andfitnessfor aparticular purpose. Some
jurisdictions do not allow the exclusion of implied warranties so this limitation
may not apply to you. To obtain warranty service, contact BWI Eagle for a
return material authorization. When returning equipment to BWI Eagle, the
customer assumes the risk of damage or loss during shipping and is
responsible for the shipping costs incurred.
DOCUMENT DATE: 10/14/2021 / PRODUCT REV. 6
