Hanwha Techwin Wisenet PNP-9200RH User manual

PNP-9200RH
NETWORK CAMERA
Quick Guide

2_ English
WHAT’S INCLUDED
Camera CD Quick Guide (Optional) Warranty card (Optional)
Cable for the testing monitor Hexagon screw L Wrench Installation base
Waterproofing accessory

English _3
NETWORK WIRING DIAGRAM
Camera
Camera
Local PC
Broadband
Router
PPPoE or
Cable Modem
PPPoE or
Cable Modem External Remote
PC
DDNS Server
(Data Center, KOREA)
INTERNET

4_ English
MANUAL NETWORK SETUP
Run <IP Installer_v2.XX.exe> to display the camera search list.
At the initial startup, both [Auto Set] and [Manual Set] will be grayed out.
M
`For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not support this
function.
aSelect a camera in the search list.
bClick [Manual Set].
The Manual Setting dialog appears.
cIn the <Address> pane, provide the necessary
information.
dIn the <Port> pane, provide necessary
information.
• HTTP Port : Used to access the camera using
the Internet browser, defaulted to 80.
• VNP Port : Used to control the video signal
transfer, defaulted to 4520.
eEnter the password.
The default password is “4321”.
J
`In the IP installer, you can use the initial password,
“4321” to set IP Address, Subnet Mask, Gateway,
HTTP Port, VNP Port, IP type. After changing the network interface, for better security, access the web viewer and
change the password.
`If you want to set the password, refer to “Password setting”. (page 5)
fClick [OK].
Manual network setup will be completed.
CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC
1. Run the IP Installer.
It will scan for connected cameras and display them as a list.
2. Double-click a camera to access.
The Internet browser starts and connects to the camera.
M
`Access to the camera can also be gained by typing the camera’s IP address in the address bar of the Internet
browser.
a
b
d
e
f
c

English _5
PASSWORD SETTING
When you access the product for the first time, you must
register the login password.
When the “Password change” window appears, enter the
new password.
J
`For a new password with 8 to 9 digits, you must use at
least 3 of the following: uppercase/lowercase letters,
numbers and special characters. For a password with
10 to 15 digits, you must use at least 2 types of those
mentioned.
-Special characters that are allowed. :
~`!@#$%^*()_-+=|{}[].?/
`For higher security, you are not recommended to repeat the same characters or consecutive keyboard inputs for
your passwords.
`If you lost your password, you can press the [RESET] button to initialize the product. So, don’t lose your password
by using a memo pad or memorizing it.
LOGIN
Whenever you access the camera, the login window appears.
Enter the User ID and password to access the camera.
aEnter “admin” in the <User Name> input box.
bEnter the password in the <Password> input field.
cClick [OK].
INSTALLING WEBVIEWER PLUGIN
To access to the plug-in webviewer and play a live video (H.264/H.265) or a recorded video, an installation
message will be prompted. At this time you need to install the webviewer plug-in to use the function
properly.
M
`If the plug-in installation file download status is suspended at 99% in the Internet Explorer browser, retry it after
selecting “Release SmartScreen filter” in “Tool SmartScreen filter”.
`In your internet explorer, if you need to move to the installation screen after installing the webviewer plugin,
check whether webviewer_activexplugin_lib.control in the “Tool Additional Function Management” menu is
“Activated”. If not, and if there is a persisting problem, then select “Tools Internet Options General” and
delete all the search records.
a
b
c

6_ English
CONNECTING TO THE CAMERA FROM A REMOTE PC VIA THE
INTERNET
Since using the IP Installer on a remote computer that is not in the Broadband Router’s network cluster is
not allowed, users can access cameras within a Broadband Router’s network by using the camera’s DDNS
URL.
Port Range Forward (Port Mapping) Setup
aFrom the Setup menu of the Broadband Router,
select <Applications & Gaming> - <Port Range
Forward>.
bSelect <TCP> and <UDP Port> for each
connected camera to the Broadband Router.
The number of each port to be configured to
the IP router should be set according to the port
number designated in <Setup> - <Basic> - <IP
& Port> on the camera web viewer.
cWhen done, click [Save Settings].
Your settings will be saved.
M
`Above sample instructions are based on the CISCO’s
Broadband Router.
`The settings may differ depending on the connected Broadband Router model.
For more information, refer to the user manual of the applicable router.
Registering with DDNS
1. Visit the Wisenet DDNS web site (http://ddns.hanwha-security.com) and sign in with a registered
account.
2. From the top menu bar, select <MY DDNS>.
3. Click the [Register Product] tab.
4. Please enter the product ID and fill in the items displayed.
5. Click [Product Registration].
a
b
c

English _7
Connecting the camera to Wisenet DDNS
1. On the live screen, click the [Menu ( )] button.
2. On the menu list, click the [Setup ( )] tab.
3. Select <Network ( )>.
4. Click <DDNS>.
5. From the DDNS setup page, set <DDNS> to <Wisenet DDNS>.
6. Provide the <Product ID> that you registered product ID with the DDNS site.
7. Click [Apply].
Whe
n the connection is successfully made, you will see the message of <(Success)> on the
screen.
Hanwha Techwin cares for the environment at all product manufacturing stages, and is taking measures to
provide customers with more environmentally friendly products.
The Eco mark represents Hanwha Techwin’s devotion to creating environmentally friendly products, and
indicates that the product satisfies the EU RoHS Directive.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with
other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the
battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly
disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle
them through your local, free battery return system.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories
(e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of
their working life. To prevent possible harm to the environment or human health from uncontrolled waste
disposal, please separate these items from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
※Pan/Tilt/Zoom motors and slip ring are warrantied for one year under
continuous operation.

Head Oce
6, Pangyo-ro 319 beon-gil, Bundang-gu, Seongnam-si,
Gyeonggi-do, 463-400 Rep. of KOREA
Tel : [phone] Fax : [phone]
www.hanwha-security.com
Hanwha Techwin America
500 Frank W. Burr Blvd. Suite 43 Teaneck, NJ 07666
Toll Free +1.877.213.1222 Direct +1.201.325.6920
Fax [phone]
www.hanwhasecurity.com
Hanwha Techwin Europe
Heriot House, Heriot Road, Chertsey, Surrey, KT16 9DT, United Kingdom
Tel [phone] Fax [phone]
www.hanwha-security.eu
Hanwha Techwin(Tianjin) Co.Ltd
No.11, Weiliu Rd., Micro-Electronic Industrial Park, Jingang Road Tianjin 300385, China
Tel : [phone]
www.hanwha-security.cn
Hanwha Techwin Middle East FZE
JAFZA View 18, 20th oor, oce 2001, 2002, 2003, Downtown Jebel Ali,
Dubai, United Arab Emirates
http://hanwha-security.com