Happy Beds Cameo Wooden Cotbed User manual

Julian Bowen Limited
Cameo Cotbed
CAM201
Assembly Instructions
Version 151812
Cameo Wooden Cotbed
Assembly Instructions
www.happybeds.co.uk
Important before assembly:
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product,
to void scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
Health & Safety:
This product or some parts of this product will be heavy. Please use an assistant when lifting.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
Please keep these instructions for future reference.

02
@
This product or some parts of this product will be heavy. Please use an assistant
when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause
damage to the joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please
contact us by visiting:
https://www.happybeds.co.uk/customer-service
(Not metal)
These tools are not
necessary, but may
help to assemble
certain parts of the
product.
Do NOT use any power
tools as this may
damage the frame.

03
HARDWARE
PARTS
01
02
03
04
04
05
05
06
13x
A
5x 4x
B
4x 1x 8x 1x
C D E F
26x
G

Safety
Warning: Do not use the cot or bed if any part is broken, torn or missing and use only spare
parts approved by the manufacturer.
Warning: Do not leave anything in the cot or place the cot close to another product, which
could provide a foothold or present a danger of suffocation or strangulation, e.g. strings,
blind/ curtain cords, etc.
Warning: Do not use more than one mattress in the cot.
Warning: Be aware of the risk of open fires and other sources of strong heat, such as electric
bar fires, gas fires, etc. near the vicinity of the cot.
Warning: Do not place this child’s bed near heat sources, windows or other furniture.
Warning: This Cotbed is not designed to be used as a Daybed with 3 high sides and
removing one of the safety rails. This may cause significant risk to the child.
 The base can be adjusted in height in cot mode, but the lowest position is the safe
stand should always be used in that position as soon as the baby is old enough to sit
up.
 This product is suitable for a mattress of 1400mm in length and 700mm in width.
 The length and width of the mattress shall be no less to ensure the gap between the
mattress and the sides and ends does not exceed 30mm.
 The thickness of the mattress shall be such that the internal height (surface of the
mattress to the upper edge of the cot frame) is at least 500mm in the lowest position
of the cot base and at least 200mm in the highest position of the cot base.
 The bed mode is suitable for a child from 18 months old to 4 years old.
 Children are likely to play, bounce, jump and climb on beds, therefore the child‘s bed
should not be placed too close to other furniture or windows, blind cords, curtain
pulls or other strings or cords. It should be placed either tight to any wall or have a
gap of 300mm between the wall and the side of the bed.
 The bed can be carefully dismantled for storage and transportation.
 To prevent injury from falls the cot should no longer be used for the child once they
are able to climb out of the cot.
 This product conforms to: BS EN 716-1: 2008 + A1: 2013 and BS 8509: 2008 + A1: 2011
04
The bed can be carefully dismantled for storage and transportation but the slatted base
system (slats and 2 side rails) should be left in one piece. Do not dismantle by removing the
26 x Self-Tapping Screws (G).

1 - COT MODE
2
05
A
A
A
A
A
B
B
B
B
01
02
03
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G05
05
06
13x

3
4
06
F
E
E
E
04
01
CC
C
C
D

5
6
07
E
E
F
E
04
C
C
E
E
E
E
F
E
C
D

7
08
01 02
03

8 - BED MODE
09
02
03
B
B
01

9
10
10
C
C
01
C
C
D
C
C
C
C
D
02

11
www.happybeds.co.uk
General Care & Maintenance
Please dispose of all packaging safely.
Wipe clean with a slightly damp cloth.
Avoid the use of all household cleaners and abrasives.
Periodically check all screw & fixings to ensure they are secure.
When moving your product, carefully lift into place. Never drag or push the pieces across the
floor as this will cause damage to the joints and could result in failure to the product that will
invalidate the warranty.
For more information on cleaning and product care visit:
https://www.happybeds.co.uk/help-and-advice
We’ve tried to make this product as easy to assemble as possible. In the unlikely event that
you have problems putting it together or have damaged or missing pieces, please contact
us by visiting:
https://www.happybeds.co.uk/customer-service
Notes