Happy Beds Lisbon 4FT6 User manual

Lisbon Pine Wood Frame - 4FT6
Assembly Instructions
www.happybeds.co.uk
Important before assembly:
.
Health & Safety:
.
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
Assemble the product as close to its intended final location/room as possible.
This product or some parts of this product will be heavy. Please use an assistant when lifting.
Please keep small parts out of reach of children.
Always use on a level, even surface.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Further instructions are on the following pages.
Please keep these instructions for future reference.

@
This product or some parts of this product will be heavy. Please use an assistant when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause damage to the
joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please contact our
customer services (details at the back of these instructions)
(Not metal)
These tools are not
necessary, but may help
to assemble the product.
Do NOT use any power
tools as this may
damage the frame.

HARDWARE LIST
Part Item Qty
30mm dowel
16mm Screw
30mm Screw
Nut
50mm Bolt
80mm Bolt
Half moon nut
Code: S000238
A
D
G
L
B
E
J
M
C
F
K
48
8
48
8
2
2
8
4
4
40mm dowel 70mm Bolt
Page 2 of 6
Recycle
2
m
01234567891 0
mm 1 1 1 2 1 3 1 4 1 5 1 6
Part Item Qty
32mm Bolt 2
H
N
Metal bracket 2
2
Spacer
1
Allen key
You will need a screwdriver, small mallet and M11 spanner (not provided).
1Headboard post x 2
(85 x 4.5cm)
2Left footboard post
(38 x 4.5cm)
3Right footboard post
(38 x 4.5cm)
Slat x 24
(68.2 x 6.5cm)
4
Headend rail x 10
(25 x 4.5cm)
5
Support leg x 2
(28.3 x 6.5cm)
6
Side rail x 2 (190 x 11.2cm)
7
8Centre rail (190 x 6.5cm)
9Top headboard rail x 2 (134.8 x 6.5cm)
10 Bottom headboard rail (134.8 x 6.5cm)
11 Footboard panel (134.8 x 9.2cm)
12 Hardware Kit x 1
1
Glue
O

Vendor: S000238
Step 1: Join the support legs (6) to the centre rail (8) using hardware G and M.
Insert hardware part B to the side rails (7) using a small mallet (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Page 3 of 6
M
5
9
9
5
5
A
A
A
A
A
A
Step 2: Insert hardware part A to the top headend rails (9), bottom headend rail (10) and footend panel (11)
using a small mallet (not provided).
9 10 11
2x
Step 3: Insert hardware part A and O to the headend rails (5). Attach the headend rails (5) and top headend rails (9).
B
B
G
G
G
6
7
8
6
2x
A
A
O
5
O
5
10x
9

Vendor: S000238
Page 4 of 6
H
M
Step 4: Attach the headend post (1) to the top headend rails (9)
and bottom headend rail (10) using hardware parts H and M.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 5: Attach the left footend post (2) and right footend post (3) to the footend panel (11) using hardware parts H and M.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
H
H
H
H
H
H
1
1
10
9
9
H
H
H
M
2
3
11
2

Vendor: S000238
Step 7: Attach the side rails to the headend posts at the same time using hardware parts J, K and M.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 6: Fix hardware part L to the headend rail (10) and footend panel (11) using hardware
part C and a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Page 5 of 6
C
L
L
10
11
L
11
10
11
J
M
K
J
M
10
K

Vendor: S000238
Step 8: Fix the centre rail (8) using hardware parts E and F and a spanner (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Page 6 of 6
Step 9: Fix slats (4) to the side rails and centre rail using hardware parts D and N with a screwdriver (not provided).
Make sure to start from the ends and work towards the middle.
DO NOT use any power tools as this may damage the frame and will invalidate any claim
Additional Information:
• For complete product information, images and dimension diagrams please visit the website www.birlea.com
• If you have any issues with your item please contact the retailer directly you purchased it from who will be
able to resolve any issues with Birlea.
• Why don’t you send us photos of your assembled furniture to [email protected] to be
shared in our #birleahome feature on Instagram.
b:
a:
N
D
D
4
44
4
4
4
N
4
4
E
E
F
E
8
8

www.happybeds.co.uk
General Care & Maintenance
Please dispose of all packaging safely.
Wipe clean with a slightly damp cloth.
Avoid the use of all household cleaners and abrasives.
¤ƲȯǛȉƫǛƤƇdzdzɬ٪ƤǕƲƤǯ٪Ƈdzdz٪ȷƤȯƲɦ٪ۂ٪˚ɫǛǾǍȷ٪Ʌȉ٪ƲǾȷɍȯƲ٪ɅǕƲɬ٪ƇȯƲ٪ȷƲƤɍȯƲؘ
ÝǕƲǾ٪ǼȉɥǛǾǍ٪ɬȉɍȯ٪ȬȯȉƫɍƤɅؙ٪ƤƇȯƲnjɍdzdzɬ٪dzǛnjɅ٪ǛǾɅȉ٪ȬdzƇƤƲؘ٪vƲɥƲȯ٪ƫȯƇǍ٪ȉȯ٪ȬɍȷǕ٪ɅǕƲ٪ȬȯȉƫɍƤɅ٪ƇƤȯȉȷȷ٪ɅǕƲ٪˛ȉȉȯ٪Ƈȷ٪
ɅǕǛȷ٪ɦǛdzdz٪ƤƇɍȷƲ٪ƫƇǼƇǍƲ٪Ʌȉ٪ɅǕƲ٪ǬȉǛǾɅȷؘ٪Unj٪ɅǕƲ٪ȬȯȉƫɍƤɅ٪Ǜȷ٪ɍȷƲƫ٪ȉǾ٪ǕƇȯƫ٪˛ȉȉȯǛǾǍؙ٪ȷɍƤǕ٪Ƈȷ٪ɦȉȉƫ٪ȉȯ٪dzƇǼǛǾƇɅƲƫ٪
˛ȉȉȯؙ٪ɬȉɍ٪ǼɍȷɅ٪ȬdzƇƤƲ٪ȷȉǼƲ٪ȬȯȉɅƲƤɅǛȉǾ٪ɍǾƫƲȯ٪ɅǕƲ٪dzƲǍȷ٪Ʌȉ٪ȷɅȉȬ٪ɅǕƲ٪ȬȯȉƫɍƤɅ٪njȯȉǼ٪ǼȉɥǛǾǍؘ٪Unj٪ɅǕǛȷ٪Ǜȷ٪ǾȉɅ٪
adhered to, it could result in failure to the product that will invalidate the warranty.
For more information on cleaning and product care visit:
https://www.happybeds.co.uk/help-and-advice
In the unlikely event that you have problems putting this product together or have damaged or
missing parts, please contact us by visiting:
https://www.happybeds.co.uk/customer-service
Notes