Happy Beds Urban 1 Drawer Narrow Table User manual

Urban 1 Drawer Narrow Table
Assembly Instructions
www.happybeds.co.uk
Important before assembly:
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product,
to void scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
Health & Safety:
This product or some parts of this product will be heavy. Please use an assistant when lifting.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
Please keep these instructions for future reference.

@
This product or some parts of this product will be heavy. Please use an assistant
when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause
damage to the joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please
contact us by visiting:
https://www.happybeds.co.uk/customer-service
(Not metal)
These tools are not
necessary, but may
help to assemble
certain parts of the
product.
Do NOT use any power
tools as this may
damage the frame.

Page of 6
Vendor: S000350
Parts List Hardware List
Part Descripion Qty Part Description Qty
08
08 07
09
06
G
01 1
Top panel
02
03
04
05
06
07
08
09
Bottom panel
Drawer Front
Drawer Back
Drawer Side
Drawer Bottom
1
1
1
1
1
1
2
1
Back Panel
Side panel ( Left )
Side panel ( Right )
A2
Cam lock
Minifix screw
B
Plastic cap
M6 x 30mm Wood Dowel
C
D
E
F
G
H
I
J1
J2
M3.5 x 12mm C.B Screw
4
4
4
8
12
8
Handle 100.96. BLM
Allen key M4 1
1
Handle screw M4 x 30mm 2
JCBC screw M6 x 30mm 6
M4 x 38mm C.B Screw 12
A1
A3
2
03
01
05
04
02
10
10
11
11
12
M4 x 25mm C.B Screw
10 Metal Frame Side 2
11 Metal Frame Front & Back 2
12 Metal Frame Middle 112'' Drawer slide (Left / Right)
12'' Drawer slide (Left / Right)
2
2
** You will need a small mallet and a
screwdriver for assembly.
** Some screws and wooden dowel
may remain.

Page of 6
Vendor: S000350
Step 1: Prepare these parts for assembly using hardware parts A1, A2, B, D, G, H and J1.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
3
A2
A2
A2
A2
B
B
B
BB
A1
A1
A1
A1
B
B
B
J1
DDD
03 04
03 04
01
H
G
6
J1
J1
H

Page of 6
Vendor: S000350
Step 2: Attach panel (3) and (4) to panel (1) using hardware A1, A2 and A3 with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
A1
A1
A3
A2
03
04
01
02
05
03
04
4
Step 3: Insert panel (5) along the slot.
Attach panel (2) to panel (3) and (4) using hardware F.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
F

Page of 6
Vendor: S000350
Step 5: Attach Metal Frame Front & Back (11) and Metal Side (10) to panel (2) using hardware E.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
5
D
I
10
04
02
01
03
12
11
10
11 E
11
Step 4: Attach Metal Frame Side (10) to Metal Front & Back (11) and Metal Middle (12) using hardware D and I.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
12
10
10 11
11

Page of 6
Vendor: S000350
6
D
D
D
D
D
D
J2 08
X3
08 X3
09
07
06
09
07
06
08
08
07 07
08 06
08
J2
J1
06
09
J2
J2
J2
J2
F
F
F
F
F
F
F
J1
J2
J2
Step 7: Assemble the drawer in place along the drawer slides.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 6: Assemble the drawer components using hardware D, F and J2.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
06
03
01
04

www.happybeds.co.uk
General Care & Maintenance
Please dispose of all packaging safely.
Wipe clean with a slightly damp cloth.
Avoid the use of all household cleaners and abrasives.
Periodically check all screw & fixings to ensure they are secure.
When moving your product, carefully lift into place. Never drag or push the pieces across the
floor as this will cause damage to the joints and could result in failure to the product that will
invalidate the warranty.
For more information on cleaning and product care visit:
https://www.happybeds.co.uk/help-and-advice
We’ve tried to make this product as easy to assemble as possible. In the unlikely event that
you have problems putting it together or have damaged or missing pieces, please contact
us by visiting:
https://www.happybeds.co.uk/customer-service
Notes