Happy Beds Pembroke 4 Drawer Chest User manual

Pembroke 4 Drawer Chest
Assembly Instructions
www.happybeds.co.uk
Important before assembly:
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product,
to void scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
Health & Safety:
This product or some parts of this product will be heavy. Please use an assistant when lifting.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
Please keep these instructions for future reference.

@
This product or some parts of this product will be heavy. Please use an assistant
when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause
damage to the joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please
contact us by visiting:
https://www.happybeds.co.uk/customer-service
(Not metal)
These tools are not
necessary, but may
help to assemble
certain parts of the
product.
Do NOT use any power
tools as this may
damage the frame.

PARTS LIST
Part Item Qty
11
12
1
3
2
4
2
5
2
6
1
7
8
8
1
9
410
411
4
12
4
13
HARDWARE LIST
Part Item Qty
Wooden dowel
A
B
C
F
68
70
30mm Screw
** You will need a small mallet and a screwdriver.
Recycle
2
m
01 2 345 6 7891 0
mm 1 1 1 2 1 3 1 4 1 5 1 6
Tack 20
Top Panel
Right Panel
Left Panel
Front Side Column
Back Side Column
Front Cross Member
Rear Cross Member
Slide
Back Background
Drawer Front
Left Side Drawer
Right Side Drawer
Drawer Back
Vendor: S000238
4x
1
9
10
11
12
13
14
18mm Screw 8
60mm superb bar
D
E
4
4
Smooth shell pull
414 Drawer Bottom
415 Foot
15
15
15
15
14mm Screw
G1
Wall Strap 1
Washer 2
H
I
5
4
5
4
3
6
6
7
8
2
8
8
8
8
8
8
8

STEP 1: Insert the hardware (A) in the parts shown.
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
STEP 2: Fix the right panel (2) and left panel (3) into the front side column (4)
and back side column (5) using hardware (B).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
Vendor: S000238
2x
8x
3
2
7
6
8
11
12
2
2x
4x
4x
4
5
3
4
5
5
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B

STEP 3: Insert the hardware (D) into the foot (15) and insert the foot (15)
into the assembled right panel (2) and left panel (3).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
STEP 4: Attach the front cross member (6) and rear cross member (7) into the assembled right panel (2)
and left panel (3).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
Vendor: S000238
B
B
15
6
6
2
3
15
15
15
15
2
3
B
7
3
D

STEP 5: Attach the assembled frame to the top panel (1) using hardware (B).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
STEP 6: Attach the slide (8) into the side of furniture using hardaware (B).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
Vendor: S000238
8
1
6
Attention:
correct slide position
!
B
B
B
B
B
B
B
B
B
B

STEP 7: Fix the back Panel (9) using hardware (F).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
STEP 8:
Fix the le side drawer (11) and the right side drawer (12) to the drawer front (10) using hardware (B).
Insert the drawer boom (14) between the le side drawer (11) and the right side drawer (12).
Fix the drawer back (13) to the le side drawer (11) and the right side drawer (12) using hardware (B).
Fix the hardware (E) onto the front of the drawer using hardware (C).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
Vendor: S000238
a: b:
c:
13
11
12
10
14
4x
9
F
B
B
B
B
E
C

Step 9: The chest needs to be fixe to the wall.d
Fix the wall strap (H) to the wall using washer (I) and screw (not provided).
Insert wall strap through the hole in the back part of the furniture and
fix onto the top panel using washer (I) and 14mm Screw (G).
Wall plug and screw are not supplied to attach the wall strap to the wall.
The correct type of fixing must be used for your wall, seek professional advice if in doubt.
a:
b:
c:
wall
1
1
H
I
H
H
I
G

STEP 10: Insert the hardware (A) into the slides (8).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
Vendor: S000238
Step 11: Insert the drawers using hardware (A).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
4x
!
AA
A
A
A
A
A
A
A
A
A
A
A
8

www.happybeds.co.uk
General Care & Maintenance
Please dispose of all packaging safely.
Wipe clean with a slightly damp cloth.
Avoid the use of all household cleaners and abrasives.
Periodically check all screw & fixings to ensure they are secure.
When moving your product, carefully lift into place. Never drag or push the pieces across the
floor as this will cause damage to the joints and could result in failure to the product that will
invalidate the warranty.
For more information on cleaning and product care visit:
https://www.happybeds.co.uk/help-and-advice
We’ve tried to make this product as easy to assemble as possible. In the unlikely event that
you have problems putting it together or have damaged or missing pieces, please contact
us by visiting:
https://www.happybeds.co.uk/customer-service
Notes