BDI 8354 User manual

Eras 8357 Cabinet
Eras 8354 Cabinet
Eras 8358 Cabinet
I - Handles
8354, 8358 x 2
8357 x 3
H - M4 x 25mm Screws
8354, 8358 x 4
8357 x 6
B - 5mm Hex Wrench x 1
For Cam and Bolt
A - 4mm Hex Driver x 1
For Screws
D - 8 x 40mm Dowels x 4
A2 - Phillips
Screwdriver x 1
C1
C1 - Cam and C2 - Cam Bolt x 4
G - 1/4-20 x 63mm Screws
8357, 8358 x 10
8354 x 8
E - 1/4-20 x 38mm Screws
8357,8358 x 6
ERAS
Designed by: Noah Packard
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. © 2012 BDI
8354 8357 8358 Revision: 07-02-12
Component List
ERAS cabinets are engineered for easy assembly. Carefully follow this procedure to prevent any damage.
Unpack and identify the components. The assembly workspace should be a non-marring surface such as clean carpet.
For missing hardware pieces, please contact BDI Customer Service at [e-mail].
For all other concerns, please contact your BDI Retailer.
8354 8357 8358
ASSEMBLY INSTRUCTIONS
1
BDIUSA.COM [e-mail]
Placement and Maintenance
ERAS cabinets are designed for indoor use on level floors. Clean glass with glass cleaner, and wood veneer with a moist cloth.
J - Cabinet x 1
K- Long Base Rails x 2
L- Short Base Rails x 2
M - Steel Supports x 2 (none for 8354)
N - Adjustable Shelves x 2
O- Removable Back Panels x 2
J
I
N
N
O
K
K
L
L
O
C2
M
M

ERAS
8354 8357 8358 ASSEMBLY INSTRUCTIONS
2 BDIUSA.COM [e-mail]
Step 1
Assemble Base
Insert Cams (C1) into Short Base Rails (L) with the
hole opening facing the Long Base Rail (K).
Insert Dowels (D) into Long Base Rails (K). Insert
threads of Cam Bolt (C2) into inserts in Long Base
Rails (K).
Step 2
Tighten Cams in Base
Tighten Cams (C1) in Short Base Rails (L)
using Phillips Screwdriver (A2).
L
L
K
K
A2
DK
L
L
K
K
L
L
K
C2
Threads
C1

ERAS
8354 8357 8358 ASSEMBLY INSTRUCTIONS 3 BDIUSA.COM [e-mail]
Step 3
Attach Base to Cabinet Bottom
Place assembled base onto cabinet bottom.
Insert Screws (G) into Short Base Rails (L)
and tighten using 4mm Hex Driver (A).
Step 4
Attach Steel Supports to Cabinet
Install Screws (E and G) into Steel Supports (M)
and tighten using 4mm Hex Driver (A).
After all screws are tightened, turn cabinet over
right side up.
A
A
Recommended
2-person Step
L
L
To turn Cabinet over
G
G
E
M

ERAS
8354 8357 8358 ASSEMBLY INSTRUCTIONS
4 BDIUSA.COM [e-mail]
Step 5
Attach Handles
Attach Handles (I) to Doors using Screws (H)
and tighten with Phillips Screwdriver (A2).
Step 6
Install Shelves and Back Panels
Install Shelves (N) at desired location using
Shelf Pins.
Install Back Panels (O) by inserting top edge
into upper slot, then tilt bottom of panel in
and lower panel into bottom slot.
I
H
H
O
N
Turn screw to adjust door tilt.
Turn screw to adjust door in or out from cabinet.
To Adjust Doors
Loosen screws on hinge plate
to adjust door up or down.
A2