Harbor Freight Tools 69456 Assembly instructions

Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright©2012 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product
described herein. Tools required for assembly and service may not be included.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Owner’s Manual & Safety Instructions
Visit our website at: http://www.harborfreight.com
Email our technical support at: [email protected]
ITEM 69456
10' x 10'
Pop Up Canopy

Page 2 For technical questions, please call 1-800-444-3353. Item 69456
Specifications
Dimensions 10 FT x 10 FT at base
8 FT x 8 FT at canopy
Canopy 150 Denier Polyester
Important Safety Information
1. Setup only according to these
instructions. Improper setup
can create hazards.
2. Wear ANSI-approved safety goggles
during setup. Wear heavy-duty work
gloves when working with frame parts.
3. Keep setup area clean and well lit.
4. Keep bystanders out of the
area during setup.
5. Do not setup when tired or when under
the influence of drugs or medication.
6. DO NOT USE IN HIGH WIND.
Remove cover if harsh weather
or heavy rain threatens.
7. Do not allow snow, rainwater,
or debris to accumulate
or pool on shelter.
8. Anchor securely to flat, level, solid
surface able to support shelter and
vehicle according to manual instructions.
9. Inspect before setup and every
use; do not setup or use if
parts loose or damaged.
10. Read manual before setup and/or use.
11. This product is not a toy. Do not allow
children to play with or near this item.
12. Use as intended only.
13. Maintain product labels and
nameplates. These carry
important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.

Page 3For technical questions, please call 1-800-444-3353.Item 69456
Setup Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the
beginning of this document including all text under subheadings therein
before set up or use of this product.
1. Place the Frame in the center of the
desired location. With two people
standing opposite each other, lift the
Frame and pull it several feet apart.
CAUTION! Be careful not to pinch fingers or
hands as you pull the Frame into shape.
2. Open the Frame completely and engage
the Slider at each corner by pulling up on
the Slider until it clicks into place.
3. Place the canopy over the Frame and
secure the corners around the top of the
Legs with the hook and loop tape.

Page 4 For technical questions, please call 1-800-444-3353. Item 69456
4. Extend the Inner Legs until the pins click
into place to raise the Canopy to its
desired height.
5. Attach the hook and loop strips to each
corner and overhead Trusses.
6. Secure the bottom of each Leg using
sandbags (not included) or the included
Ground Anchors.

Page 5For technical questions, please call 1-800-444-3353.Item 69456
Take Down Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the
beginning of this document including all text under subheadings therein
before set up or use of this product.
1. Remove anchors or sandbags from legs.
2. Push in the Pins on the legs and lower
the Inner Legs to lower the Canopy
Frame.
3. Disengage the Locking Button at each
corner of the Frame and pull the Slider
down slowly until the button is completely
free of the Slider.
4. Remove all the hook and loop tape from
all parts of the Frame and remove the
Canopy.
5. With two people standing opposite each
other, lift the Frame and push it together
collapsing the Frame completely.
CAUTION! Be careful not to pinch fingers or hands
as you collapse the Frame for storage.
6. Slide the Frame into the Storage
bag. Fold the Canopy and
place in the Storage bag.
Locking
Button

Page 6 For technical questions, please call 1-800-444-3353. Item 69456
Parts List and Diagram
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER
OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE
BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR
THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE
MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS
REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS,
AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF
HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO,
OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Parts List
Part Description
A Dome Cap
B Inner Leg (with Foot Pad)
C Joint Bolt, Nut, Cap Set
D Outer Bracket, 3-Way
E Slider Bracket, 3-Way
F Outer Leg (with Insert and Push Button)
G Inner Joint with Screws
H Inner Bolt Cap
I End Bolt Cap
J Outer Truss Bar (connected to D)
K Outer Truss Bar (connected to E)
L Inner Truss Bar (connected to E)
M Inner Truss Bar (connected to D)
N Inner Truss Bar (connected to A)
O Ground Anchor (not shown) qty: 4

Page 7For technical questions, please call 1-800-444-3353.Item 69456
Diagram
Record Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only,
and are not available individually as replacement parts.

Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality
and durability standards, and warrants to the original purchaser that this product is free from
defects in materials and workmanship for the period of 90 days from the date of purchase.
This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence
or accidents, repairs or alterations outside our facilities, criminal activity, improper installation,
normal wear and tear, or to lack of maintenance. We shall in no event be liable for death,
injuries to persons or property, or for incidental, contingent, special or consequential damages
arising from the use of our product. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation of exclusion may not apply to you.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation
charges prepaid. Proof of purchase date and an explanation of the complaint must accompany
the merchandise. If our inspection verifies the defect, we will either repair or replace
the product at our election or we may elect to refund the purchase price if we cannot readily
and quickly provide you with a replacement. We will return repaired products at our expense,
but if we determine there is no defect, or that the defect resulted from causes not within
the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • [phone]