HARDWARE RESOURCES CAN-MDB5 Series User manual

Metal Drawer Box
Waste Container
STEP 1
Detach the Slides
STEP 2
Remove the Mounting Brackets
Detach the slides from the metal wall drawer box. Use a screwdriver to turn the mechanism in the drawer box that
will release the mounting brackets that are on the inside.
Installation Instructions for
the CAN-MDB5 Series
Double/Single Can 35 qt/50 qt
Trash Systems
STEP 3
Install the Front Mounting Brackets
Install the front mounting brackets on the front using the screws provided and according to the dimensions above.
Move this black piece to the
side to reveal the screw hole
IMPORTANT:
Before you begin, make sure you familiarize yourself with all the
parts and fully read the instructions.
CUSTOMER SERVICE:
Toll free customer help line available weekdays between
7:00am and 6:00pm Central Time at 800-463-0660.
TOOLS NECESSARY:
Screw gun or Phillips screwdriver and tape measure. NOTE: If
screw gun has a clutch, set to lowest setting so as not to over
tighten and/or strip screws.
PARTS IDENTIFICATION:
A Grey 35 or 50 Quart Trash Can 1 Single/2 Double
B Top Cover 1 pc
C Back Panel 1 pc
DBottom Panel 1 pc
EMDB500-185-21GR 1 pc
F #8x5/8 Pan head Wood Screw 4 pcs
G Metal Runners with Screws 2 pcs
Scan to watch the installation video
https://delivr.com/2hmwh
A
B
C
D
E
F
G

STEP 4
Install the Slides
STEP 5
Install the Metal Drawer Box
STEP 6
Install the Cabinet Door
Install the slides with the metal runners inside the cabinet using
the screws provided according to the pictures above.
Place the metal drawer box inside the cabinet and slide it on the
slides to the end until a click sound is heard.
Install the cabinet door to the metal drawer box using the door
mounting brackets. They will click into place.
CAN-MDB REV 1-2020
STEP 7
Install the Top Cover
STEP 8
Install Trash Cans
Place the top cover on top of the metal drawer box. A magnetic strip holds the cover in place.
Note: The top cover only sits properly when it is in the correct orientation depicted in the drawings. (Except 50 qt version in which the
top cover is symmetrical and can be placed in either direction.)
Single 35 Quart Double 35 Quart Double 50 Quart
35 Qt Trash Can
Placement at
the front of
the cabinet
Accessory
placement
at the back
of the cabinet
Thin section
placed at the
front of the
cabinet
Top Cover can
be installed in
either direction