Harman Kardon DVD 37 Quick start guide

TV
∂éç∫å
To Y (green)/
Pb (blue)/
Pr (red)
component
video
connectors
To HDMI
or DVI
port on TV
To S-video
input
connectors
on the TV
To analog audio
input connectors
(red/white) on the TV
To video
input
connectors
(yellow)
on the TV
To power outlet
(AC 120V/60Hz)
AC INPUT
120V~, 60Hz
13W
DVD 37 CONNECTION GUIDE 1
Connecting to a TV Only
When using the DVD 37 with a television but no audio receiver or processor, connect it as follows. Make the Analog Audio
Connection åand one of the Video Connections (Composite Video ∫,S-Video ç,Component Video ∂).
If your television or video display is HDMI-capable, you only need to make the HDMI éconnection, as it handles both audio and video.
Remember to plug in the power cord.
IMPORTANT NOTE: Make certain that any device being connected, including the DVD 37, your receiver or processor and your TV or
video display, is turned off whenever you make connections between products.