Harman Kardon HS 210 User manual

harman/kardon Service Manual
HS 2X0/230
(HS 210 system and HS 280 system)
2 x 65W 2.1 RECEIVER / HOME CINEMA SYSTEMS
CONTENTS
ELECTRICAL PARTS LIST 13
SEMICONDUCTOR PINOUTS 19
PCB DRAWINGS 42
BLOCK DIAGRAM 52
WIRING DIAGRAM 53
REVISION HISTORY 54
SCHEMATIC DIAGRAMS 56-73
FEATURES 2
ACESSORIES 3
FRONT AND REAR PANELS 4
REMOTE CONTROL 8
TROUBLESHOOTING GUIDE 9
BASIC SPECIFICATIONS 10
EXPLODED VIEW AND PARTS 11
PACKAGE LISTS AND PARTS 12
NOTE: The HS 210 and HS 280 systems DVD/amplifier units are identical, named “HS 2X0”
on the rear panel, but featuring NO NAME-STICKER on the front panel.
The only difference is the loudspeakers included in the system box.
HS 210 comes with a HKTS 30 system in 2.1 configuration
HS 280 comes with a HKTS 60 system in 2.1 configuration.
Please refer to the HKTS 20+30+60 service manual for information on the speakers.
Released EU2010 Harman Consumer Group, Inc. Rev 2, 01/2011
8500 Balboa Boulevard
Northridge, California 91329
harman/kardon
HS 2X0/230 Service Manual
Page 1 of 73

Introduction
Thank you for choosing the Harman Kardon®
HS 2X0SO/230!
In the years since Harman Kardon invented the high-fidelity receiver,
we have taken to heart this philosophy: Bring the joy of home
entertainment to as many people as possible, adding performance
and ease-of-use features that enhance the experience. With the
introduction of the HS series of home-entertainment systems,
Harman Kardon offers a complete home-entertainment solution with
a wealth of listening and viewing options in one sleek component.
Each HS series system also includes a 5.1-channel or 2.1-channel
loudspeaker system, a system remote control and all the cables and
accessories you need to enjoy movies and music in your own home,
when you use them with your television or video display.
To get the maximum enjoyment from your new HS system, we urge
you to read this manual thoroughly and refer back to it as you become
more familiar with your new system’s features and their operation.
If you have any questions about this product, its installation or its
operation, please contact your retailer or custom installer, or visit our
Web site at www.harmankardon.com.
HS 2X0SO/230 Two-Channel DVD Receiver
Audio Section
• 65 watts x 2 continuous power at 6 ohms (both channels driven),
20Hz – 20kHz, <0.5% THD (total harmonic distortion)
Audio Modes
• Dolby®Digital
• Dolby Virtual Speaker
• Stereo
Analog-Audio Inputs
• FM tuner (internal)
• DVD player (internal)
• Two left/right (L/R) line input connectors
• L/R input via SCART
Analog-Audio Outputs
• Headphone output
• Subwoofer output
• One L/R line output connector
Digital Audio Inputs
• Two coaxial
• Two optical
• Two USB 2.0 ports
Digital Audio Outputs
• One coaxial
Video Inputs
• DVD player (internal)
Video Outputs
• One HDMI™ (High-Definition Multimedia Interface™) version 1.2
• One S-Video
• One composite video
• S-Video and composite video via SCART
Speaker Outputs
• Front left and front right
Control Inputs/Outputs
• Subwoofer trigger output
• Infrared (IR) remote control input
• Infrared (IR) remote control output
Ease of Use
• On-screen menu system
• Dot-matrix front-panel information display
• Learning remote control (also controls your TV and a video
component)
DVD Player Features
• Region 2 coding
• Plays five-inch (12cm) and 3-inch (8cm) discs
• Video formats supported: DVD, DVD-R, DVD-RW, DVD+R/RW,
VCD, SVCD
• Audio formats supported: Dolby Digital, CD, CD-R/RW,
MP3, WMA (v7-v8)
• Still-image formats supported: JPEG
• Video upscaling to 720p and 1080p (HDMI output only)
• Progressive-scan video output (HDMI only)
• MP3 bit rates: 32kbps – 320kbps
• WMA bit rates: 16kbps – 192kbps
• JPEG resolution supported: Five megapixels, 5MB file size
• Still-image rotation in 90-degree increments
• Fast Play rates: 2x, 4x, 8x, 16x, 32x
• Slow Play rates: 1x, 2x, 4x, 8x
• Random Play
• Repeat Play: One group/title, one track/chapter, one folder, one disc
• Disc recognition for up to 100 discs
• Playback control for VCDs
• Aspect-ratio adjustment
SAT TS60 Satellite Speakers (for HS 280)
• One 1" (25mm) CMMD®Lite dome video-shielded tweeter
• Two 3" (75mm) flat-diaphragm, video-shielded, midrange drivers
• 20 ~ 150 watts recommended power
SAT TS11 Satellite Speakers (for HS 210)
• One 1/2" (12mm) dome, video-shielded tweeter
• Dual 3" (75mm) drivers, video-shielded, midrange
• 10 ~ 120 watts recommended power
HKTS200SUB Subwoofer
• 8" (200mm) woofer in a sealed enclosure
• 200 watts RMS amplifier power
• Automatic turn-on and turn-off
Please register your product on our Web site at
www.harmankardon.com.
Note: You’ll need the product’s serial number. At the same time,
you can choose to be notified about our new products and/or
special promotions.
www.harmankardon.com
44
NOTE: The built-in DVD player is designed and
manufactured for compatibility with Region
Management Information that is encoded on most
DVDs. This player is designed only for playback
of discs with Region Code 2 information or discs that do not
contain Region Code information. If there is any other Region
Code on a disc, it will not play in the HS 2X0SO/230.
1
2
harman/kardon
HS 2X0/230 Service Manual
Page 2 of 73

Supplied Accessories (for HS 280)
The following accessory items are supplied with the HS 280 system.
If any of these items are missing, please contact Harman Kardon
Customer Service via www.harmankardon.com.
• System remote control • HDMI cable
• SCART cable • FM wire antenna
• Two speaker • Two five-meter (16.4-foot)
wall-mount brackets speaker cables
• One combination LFE • 2 TS-60 Satellites
(low-frequency effects) and
trigger cable for connection to
the subwoofer
Supplied Accessories (for HS 210)
The following accessory items are supplied with the HS 210 system.
If any of these items are missing, please contact Harman Kardon
Customer Service via www.harmankardon.com.
• System remote control • HDMI cable
• SCART cable • FM wire antenna
• 2 TS-11 satellite speakers
• Two five-meter (16.4-foot)
speaker cables
5
• Two wall-mount brackets
• One combination LFE
(low-frequency effects) and
trigger cable for connection to
the subwoofer
harman/kardon
HS 2X0/230 Service Manual
Page 3 of 73

6
Receiver Front-Panel Controls
Phones
Volume
EjectStandby
PRO LOGIC II
VIRTUAL
SPEAKER
DOLBY
DIGITAL
DOLBY
DIGITAL
Information
Display
Disc Slot Volume Control USB
Port
Headphone
Jack
Eject
Button
Standby
Button
Power
Indicator
TOP
FRONT SIDE
Disc Slot: Insert a compatible disc into the slot. The HS 2X0SO/230’s
disc player will accept five-inch (12cm) and three-inch (8cm) discs.
Information Display: Various messages appear on this display in
response to commands. In addition, a variety of indicators will light at
various times to show the current source, settings or other aspects of
the HS 2X0SO/230’s status as described throughout this manual. See
Receiver Information Display, on page 7, for details.
Volume Control: Rotate the disc clockwise to raise the volume; rotate
counterclockwise to lower the volume. The volume level will appear
on the Information Display and on the on-screen menu (if the menu is
enabled, see Preferences – Volume Bar, on page 20).
Eject Button (on top of unit): Press this button to eject a disc from the
HS 2X0SO/230’s built-in DVD player. Before pressing this button, make
sure that no objects are blocking the disc slot. NOTE: If you do not
remove the ejected disc within 20 seconds, it will automatically re-load
back into the DVD player for protection.
Standby Button (on top of unit): This button turns the HS 2X0SO/230
on for playback or leaves it in the Standby mode for quick turn-on
using this button or the remote control.
Power Indicator: This LED (light-emitting diode) surrounds the Standby
switch. When the HS 2X0SO/230 is plugged into AC power, the LED
turns red to indicate that the HS 2X0SO/230 is in Standby mode (ready
to be turned on). When you turn the HS 2X0SO/230 on (by the Standby
switch or the remote control), the LED turns white.
Phones (headphones) Jack (on side of unit): Insert the 3.5mm stereo
mini-connector from a set of headphones into this jack. NOTE: When
a plug is inserted into the Phones jack, the HS 2X0SO/230’s speaker
outputs automatically mute; the HDMI audio output, coaxial output and
line output remain active.
USB 2.0 Port (on side of unit):
Gently insert a flash drive, card reader, digital camera or other USB
device, or a USB Standard-A cable connected to a USB device, to this
port.
IMPORTANT: DO NOT connect a PC or other USB host/controller to
this port, or you may damage both the HS 2X0SO/230 and your other
device.
Orient the other device’s plug so it fits all the way into the
HS 2X0SO/230’s USB connector. You may insert or remove the
device at any time — there is no installation or ejection procedure.
The HS 2X0SO/230 can play MP3 and Windows Media®Audio WMA
audio files that are stored on the device. The HS 2X0SO/230 can also
display JPEG-format still-image files.
harman/kardon
HS 2X0/230 Service Manual
Page 4 of 73

7
Receiver Information Display
Source Indicators: Indicate which source is currently playing.
Disc Type Indicators: Indicate the type of disc that is currently
playing.
Random Play Indicator: Indicates that the disc player is in the
Random Play mode.
Dolby Digital Indicator: Indicates that the soundtrack of the
currently-playing disc is Dolby Digital-encoded.
Progressive Scan Indicator: Indicates that the disc player is
outputting a progressive-scan video signal.
Repeat Play Indicators: Indicate that the disc player is in one of the
Repeat Play modes: Rep. = repeat all; Rep. 1 = repeat track;
A–B = A/B repeat.
Video Output Indicators: Indicate which type of video output is
currently active.
Angle Indicator: Indicates when alternative viewing angles are
available on the currently-playing DVD.
Video Format Indicators: Indicate which video format is currently
playing.
VCD Playback Control Indicator: Indicates that the playback-control
function is turned on when the HS 2X0SO/230 is playing a VCD.
Playback Mode Indicators: Indicate the current disc playback mode:
Indicates normal playback.
Indicates that the disc is in the forward fast-search mode.
The video display will indicate the selected speed.
Indicates that the disc is paused. The video display will also
indicate that the disc is paused.
Indicates that the disc is in the reverse fast-search mode.
The video display will indicate the selected speed.
Title Indicators: Show the title number of a DVD that is playing.
Chapter/Track Number Indicators: Show the current chapter when a
DVD is playing; show the current track number when a CD is playing.
Time Indicators: Show the running time when a DVD is playing; show
elapsed time when a CD is playing.
NOTE: The Title, Chapter/Track Number and Time Indicators will also
display the radio station name when Radio is the selected input. When
a DVD or CD is playing, the indicators will display various text mes-
sages about the disc’s status.
VCD
Playback Control
Indicator
Playback
Mode
Indicators
Disc Type
Indicators
Random Play
Indicator
Title
Indicators
Chapter/Track Number
Indicators
Time
Indicators
Source
Indicators
Dolby Digital
Indicator
Repeat Play
Indicators
Progressive Scan
Indicator
Video Output
Indicators
Angle
Indicator
Video Format
Indicators
harman/kardon
HS 2X0/230 Service Manual
Page 5 of 73

8
MODEL: HS 2X0SO/230
Speaker
Outputs
Coaxial
Digital
Inputs
Optical
Digital
Inputs
Subwoofer
Output
Coaxial
Digital
Output
AC Power
Input
Sub
Trigger
Output
Line
Outputs
Line 2
Inputs
SCART
Connection
FM
Antenna
Connection
Line 1
Inputs
Ethernet
Port
USB
Port
HDMI
Output
Composite
Video
Output
S-video
Output
Remote Control
Input/Output
Receiver Rear-Panel Connections
See the Connections section, on page 14, for detailed information
about making connections.
AC Power Input: After you have made and confirmed all other
connections, plug the supplied AC power cord into this input and
into an unswitched AC outlet.
Speaker Outputs: Use the speaker wires supplied with the SAT TS60
speakers to connect the satellite speakers to the proper terminals.
Be sure to connect the positive (+, colored red) connector on the
speaker to the positive (+, colored red and white) connector on the
HS 2X0SO/230, and the negative (– , colored black) connectors on the
speakers to the negative (–, colored black) connectors on the
HS 2X0SO/230. See Connecting the Satellite Speakers, on page 14, for
more information about making connections.
Coaxial Digital Inputs: Connect the coaxial digital output of an
audio-only source component here. The signal may be a Dolby Digital
bitstream or a standard PCM digital audio bitstream.
NOTE: Use only one type of digital connection for each source
component.
Optical Digital Inputs: Connect the optical digital output of an
audio-only source component here. The signal may be a Dolby Digital
bitstream or a standard PCM digital audio bitstream.
NOTE: Use only one type of digital connection for each source
component.
Coaxial Digital Output: Connect this output to the coaxial digital input
of a digital recording device such as a CD-R or MiniDisc recorder.
Sub Trigger Output: Use the black mini-cable connector of the
supplied combination LFE and trigger cable to connect this jack to the
HKTS200SUB subwoofer’s External Trigger Input. See Connecting the
Subwoofer, on page15, for more details about making connections.
Whenever the HS 2X0SO/230 is turned on, it will send a trigger signal
that will turn the subwoofer’s amplifier on. Turning the HS 2X0SO/230
off removes the trigger signal, and the subwoofer’s amplifier will turn
off. (This change will occur even when the subwoofer’s Power On Mode
switch – see page 9 – is in the Auto position.)
Subwoofer Output: Use the LFE (purple) connector of the supplied
combination LFE and trigger cable to connect this jack to the
HKTS200SUB subwoofer’s Line-Level In LFE jack. See Connecting
the Subwoofer, on page 15, for more details about making connections.
Ethernet Port: Connect this port to your local area network (LAN) using
a CAT 5 RJ45 network cable. See Connecting to a Local Area Network
(LAN), on page 17, for details.
Line Outputs: Use the Line Outputs to connect to an audio-only re-
corder, such as a CD-R recorder or tape deck.
USB 2.0 Port: Gently insert a flash drive, card reader, digital camera
or other USB device, or a USB Standard-A cable connected to a USB
device, to this port.
IMPORTANT: DO NOT connect a PC or other USB host/controller to this
port, or you may damage both the HS 2X0SO/230 and the other device.
Orient the device’s plug so it fits all the way into the HS 2X0SO/230’s
USB connector. You may insert or remove the device at any time – there
is no installation or ejection procedure.
The HS 2X0SO/230 can display JPEG-format still-image files stored on
the device and can also play MP3 and Windows Media®Audio (WMA)
files and MPEG4 and AVI video files that are stored on the device.
Line 1 Input/Line 2 Inputs: Use these inputs to connect to an
audio-only source component (such as a tape deck). Do not connect
a turntable to these jacks without a phono preamp.
HDMI Output (HDMI version 1.2): If your video display is
HDMI-capable, connect it to the HS 2X0SO/230’s HDMI output for im-
proved video performance. Since the HDMI cable transmits both video
and audio to the video display, we recommend that you disable your
display’s HDMI audio function to take full advantage of the
HS 2X0SO/230's system’s superior audio performance.
IMPORTANT: The HS 2X0SO/230 is in compliance with HDCP (High-Def-
inition Copy Protection). A video display must also be HDCP-compliant
to be used with the HS 2X0SO/230’s HDMI output. For best results, we
do not recommend HDMI connections in excess of ten feet without a
repeater. If your video display has a DVI input, you may use an optional
HDMI-to-DVI cable or adapter for the video connection to the display.
(The DVI connection is video-only.)
harman/kardon
HS 2X0/230 Service Manual
Page 6 of 73

9
Subwoofer Controls and Connections
Remote Control Input/Output: If the HS 2X0SO/230’s front-panel IR
sensor is blocked, such as when it is placed inside of a cabinet, con-
nect an external IR receiver (such as the Harman Kardon HE 1000 – not
included) to the Remote Control In connector. You can then place the
external IR receiver in a location where it can receive the signals from
the HS 2X0SO/230 remote control.
You can connect the HS 2X0SO/230’s Remote Control Out connector to
the remote IR input of a compatible device, allowing it to be controlled
through the HS 2X0SO/230 (and through an external IR receiver, if
connected). You can even connect several such compatible devices
together in “daisy-chain” fashion.
SCART Connection: Connect it to a compatible TV or set-top box
using the included SCART cable. The SCART cable carries composite
(CVBS) video or S-Video from the HS 2X0SO/230 to a TV or set-top box
(as well as a control signal for automatically controlling picture aspect
ratio and other parameters). It also carries stereo audio from the
TV or set-top box back to the HS 2X0SO/230.
Composite-Video Output: Connect it to the composite-video input
of a TV or video projector.
S-Video Output: Connect it to the S-Video input of a TV or
video projector.
FM Antenna Connection: Connect the supplied FM antenna to
this terminal.
Subwoofer Level Control: Use this control to adjust the HKTS200SUB
subwoofer’s volume. Turn clockwise to increase the volume; turn
counterclockwise to decrease the volume.
Bass Boost Switch: Set this switch to On to enhance the subwoofer’s
low-frequency performance. Set this switch to Off for normal
low-frequency performance.
Phase Switch: This switch determines whether the subwoofer driver’s
piston-like action moves in and out in phase with the satellite
speakers. If the subwoofer were to play out of phase with the satellite
speakers, the sound waves from the satellite speakers could cancel out
the sound waves from the subwoofer, reducing bass performance and
sonic impact. This phenomenon depends in part on the relative
placement of all the speakers in the room.
Although in most cases the Phase Switch should be left in the Normal
position, there is no absolutely correct setting for it. When the
subwoofer is properly in phase with the satellite speakers, the sound
will be clearer and have maximum impact. It will make percussive
sounds like drums, piano and plucked strings sound more lifelike.
The best way to set the Phase Switch is to listen to music that you
know well and set the switch in the position that gives drums and other
percussive sounds maximum impact.
Power On Mode Switch: When this switch is set in the Auto
position and when the Power switch is set to On, the HKTS200SUB
will automatically turn itself On whenever it receives an audio signal.
It will enter the standby mode if it receives no audio signal for 20
minutes. When the Power On Mode switch is set in the On position, the
subwoofer will remain on whether or not it is receiving an audio signal.
An LED on the subwoofer’s top panel indicates whether the subwoofer
is in the on or standby mode:
• When the LED is illuminated blue, the subwoofer is turned on.
• When the LED is not illuminated, the subwoofer is in standby mode.
When the Power switch is set to Off, the LED will not be illuminated,
no matter what setting the Power On Mode switch is in.
External Trigger Input Connector: Use the mini-plug of the supplied
combination LFE and trigger cable to connect the External Trigger Input
to the trigger output of another compatible component. Whenever the
subwoofer detects a trigger signal between 3V and 30V (AC or DC), the
subwoofer’s amplifier will turn on. The subwoofer’s amplifier will turn
off after the trigger signal ceases. (This change will occur even when
the Power On Mode switch is in the Auto position.)
Line-Level In LFE Connector: Use the LFE (purple) connector of
the supplied combination LFE and trigger cable to connect the
Line-Level In LFE connector to the dedicated subwoofer output of a
receiver or preamp/processor. This input bypasses the subwoofer’s
internal crossover circuitry, so use it only with a subwoofer output that
is low-pass filtered. (Check the receiver or preamp/processor’s
documentation to confirm that its subwoofer output is low-pass
filtered.) If your receiver or preamp/processor does not have a
dedicated subwoofer output that is low-pass filtered, use the
subwoofer’s Line-Level In L/R connectors instead.
Line-Level In L/R Connectors: Use these connectors if your receiver
or preamp/processor does not have digital surround-sound decoding
or a low-pass-filtered subwoofer output.
• If your receiver or preamp/processor has a separate subwoofer
output, use the LFE (purple) connector of the supplied combination
LFE and trigger cable to connect the receiver or preamp/processor’s
subwoofer output to either one of the subwoofer’s Line-Level In L/R
connectors.
• If your receiver or preamp/processor does not have a separate
subwoofer output, use two Y-adapters (not supplied). Connect one
adapter’s single end to the unit’s preamp output for that channel.
Connect one of this adapter’s dual ends to the main amp input for
that channel, and connect the adapter’s other dual end to one of the
subwoofer’s Line-Level In L/R Connectors. Repeat this process with
the other Y-adapter, the preamp channel, the main amp input and the
subwoofer’s other Line-Level In L/R connector.
Power Switch: Set this switch in the On position to turn the subwoofer
on. The subwoofer will then either be on or in Standby mode, depend-
ing on the setting of the subwoofer’s Power On Mode switch.
AC Power Cord: After you have made and verified all subwoofer and
speaker connections described in this manual, plug the Power Cord into
an active, unswitched electrical outlet (that is, an outlet not connected
to a light switch) for proper operation of the subwoofer. DO NOT plug
this cord into the accessory outlets found in some audio components.
PL0004-01001
Subwoofer
Level Control
Bass Boost
Switch
Phase Switch
Power On
Mode Switch
External Trigger
Input Connector
Line-Level In
LFE Connector
Line-Level In
L/R Connectors
Power Switch
AC Power Cord
harman/kardon
HS 2X0/230 Service Manual
Page 7 of 73

10
Remote Control Functions
System Power Button: Switches the HS 2X0SO/230 into the Standby mode.
Screen Power Button: Switches your video display on and off.
Disc Button: Selects the HS 2X0SO/230’s built-in DVD player as the
system’s active sound source and plays a disc that has been inserted into
the player. Pressing this button also puts the remote control into the disc
player control mode. See Using the DVD Player, on page 21, for details.
NOTE: Pressing this button when the HS 2X0SO/230 is in the Standby mode
will switch it on.
Radio Button: Selects the HS 2X0SO/230’s built-in FM radio as the
system’s active sound source. Pressing this button also puts the remote
control into the control mode for the radio. See Using the FM Tuner, on
page 23, for details. NOTE: Pressing this button when the HS 2X0SO/230
is in the Standby mode will switch it on.
USB Button: Selects a device connected to the front- or rear-panel USB
ports as the system’s active sound source. The HS 2X0SO/230’s on-screen
menu system lets you navigate through the files stored on the device. See
Playing Files from USB Devices, on page 24, for details. NOTE: Pressing this
button when the HS 2X0SO/230 is in the Standby mode will switch it on.
Activity Button: Switches the on-screen menu to the Activity menu from
any other active screen or menu. See Activity Button, on page 21,
for details. NOTE: Pressing this button when the HS 2X0SO/230 is in the
Standby mode will switch it on.
Learn Button: Places the remote control in the learning mode. See
Programming the Remote Control, on page 17, for details.
Network Button: Switches to the local area network (LAN) that is
connected to the HS 2X0SO/230’s rear-panel Network connector. See
Playing Files from Networked Devices, on page 25, for details. NOTE:
Pressing this button when the HS 2X0SO/230 is in the Standby mode will
switch it on.
Video Button: Puts the remote control into the video-control mode,
allowing it to control a video source component with codes that you
have programmed into the remote. See Programming the Remote
Control, on page 17, for details. If you have designated one of the
HS 2X0SO/230’s analog-audio inputs as a video-component audio input,
pressing the Video button will also make that input the system’s
active sound source. See Connecting Audio Sources/Line 1, Line 2 In,
on page 16, for details.
TV Button: Puts the remote control into the TV-control mode,
allowing it to control your TV or video display with codes that you have
programmed-into the remote. See Programming the Remote Control,
on page 17, for details. If you have designated one of the HS 2X0SO/230’s
analog-audio inputs as the TV-audio input, pressing the TV button will
also make that input the system’s active sound source. See Connecting
Audio Sources/Line 1, Line 2 In, on page 16, for details.
Settings Button: Displays the HS 2X0SO/230’s Settings menu. See
Settings Menu, on page 19, for details.
Bookmark Button: Displays the list of your stored bookmarks for easy
access. See Bookmarks, on page 21, for details.
Options Button: Displays any available options for a menu item that
is selected in the on-screen menu.
Cursor Controls: Use these controls – the up cursor, down cursor, left
cursor and right cursor – to navigate through items on the on-screen
menu.
Enter Button: Press it to select items highlighted on the on-screen menu.
Audio Button: Lets you select from the different listening modes that are
available for the source that you have selected. Pressing the Audio button
while you are playing a DVD will display the on-screen audio-mode menu.
System Power
Button
Radio Button
Disc Button
Screen Power
Button
USB Button
Activity Button
TV Button
Video Button
Learn Button
Disc Menu Button
Mute Button
Network Button
Settings Button
Bookmark Button
Eject Button
Channel + / –
Buttons
Repeat Button
Random Button
Volume + / –
Buttons
Options Button
Cursor Controls
Enter Button
Audio Button Exit Button
Display Button
Disc Transport
Buttons
Numeric Buttons
harman/kardon
HS 2X0/230 Service Manual
Page 8 of 73

27
• To skip to the next or previous MP3 file, press the or
button. To pause play, press the button. To resume play,
press the button again.
• To exit and return to file list screen, press the button.
Playing Videos
Selecting a video file plays the file. If there are other video files in the
folder, the HS 2X0SO/230 will play each one, in order as they appear
on the OSD screen.
If there are other MP3s in the folder with the one that you've selected,
the HS 2X0SO/230 will play each one, in order as they appear on the
OSD screen.
Troubleshooting
If your HS 2X0SO/230 system isn’t performing the way you think it should, check to see if the problem is covered in this section
before calling your dealer or contacting Harman Kardon.
• Check that the receiver’s AC Power Cord is properly plugged into
the receiver’s AC Power Input connector.
• Check that the AC power cord is plugged into a working AC outlet
and that the AC outlet is not controlled by a switch.
• Check that the disc surface is clean and not scratched.
• If you have the receiver’s video output connected to your TV
through your VCR, the copy-protection program on some DVDs
could affect picture quality. Connect the receiver’s video output
directly to your TV’s video input.
• Check the Audio: Settings: Delay menu and change the Delay
setting to put the sound back in sync with the picture.
• Check that the FM antenna is correctly connected.
• Adjust the antenna’s position. If necessary, use a powered
FM antenna or an outdoor FM antenna.
• Replace all three of the remote control’s batteries with fresh ones,
and make sure to install them correctly.
• Hold the remote control closer to the receiver.
• Check that the receiver’s remote sensor is in line of sight with
the remote control. If necessary, use an optional Harman Kardon
HE 1000 external IR receiver.
• Check that you have pressed the remote’s TV or Video button
before trying to operate the component.
• Re-learn the component’s commands into the remote.
• The selected function is not permitted at the time the button
is pressed.
• Unplug the receiver’s power cord from the AC outlet,
wait 30 seconds, then plug it back in.
You can find additional troubleshooting information in the FAQs link
on the Support page at www.harmankardon.com.
• Check the connection between the receiver and the TV.
• Check that the TV is turned on and is set to the proper input source.
• Confirm that all of the choices made in the Settings: Video menu are
correct for your TV.
• If you’re using the HDMI connection, be sure that the TV or video
display is HDCP-compliant. If the TV is not HDCP-compliant,
disconnect the HDMI cable and use the receiver’s S-Video or
composite-video connection.
• Check that the subwoofer’s power cord is plugged into a
working AC outlet.
• Check that the subwoofer’s Power Switch is in the on position.
• Check that the Subwoofer Level Control is not turned all the way
down (fully counterclockwise).
• Check the audio connection between the receiver and the subwoofer.
• Check the receiver’s Settings: Audio: Subwoofer menu to make sure
that the subwoofer volume has not been set at -10dB.
• Check that all input cables are plugged all the way into their
connectors.
• Check that all cables are at least 3m (9.8 ft.) from fluorescent lights.
• Check that all cable connectors are clean. If necessary, wipe them
with a cloth slightly moistened with alcohol.
• Turn the subwoofer’s Power switch off. If the hum goes away,
there is a ground loop between the subwoofer and the receiver.
Plugging the subwoofer’s Power Cord into the same AC outlet that
the receiver is plugged into should eliminate the ground loop.
• Check that the disc is inserted correctly (label-side up).
• Check that the disc is the correct type: DVD, DVD-R, DVD-RW,
DVD+R/RW, VCD, SVCD, CD, CD-R/RW, MP3, WMA (v7 and v8).
Other disc types will not play.
• Check that the disc surface is clean and not scratched.
The receiver won’t power up (the Power Indicator is not lit): There is noise or other interference in the picture while the HS 280
is playing a DVD:
The sound and picture are out of sync:
The HS 2X0SO/230 cannot tune in radio stations:
The receiver does not respond to remote control commands:
The remote does not control programmed components (TV or Video):
The Ø symbol appears on the screen when you press a remote
control button:
The receiver does not respond to commands, or behaves in an
erratic way:
Sound plays through the HS 2X0SO/230 speakers, but there is no
TV picture:
There is no sound coming from the subwoofer:
There is a constant hum in the sound:
The disc does not play:
harman/kardon
HS 2X0/230 Service Manual
Page 9 of 73

31
Specifications
HS 2X0SO/230 Receiver
Audio Section
Continuous average power, stereo mode (FTC):
65 watts per channel, 120Hz–20kHz,
@ <0.3% THD, both channels driven into 6 ohms
Input sensitivity/impedance (line inputs): 240mV/47k ohms
Frequency response @ 1W (±3dB): 120Hz–20kHz
Transient intermodulation distortion (TIM): <0.2%
FM Tuner Section
Frequency range: 87.5 – 108.0MHz
Usable sensitivity IHF: 3.0μV/14.7 dBf
Signal-to-noise ratio (mono/stereo): 65dB/60dB
Distortion mono/stereo: 0.3%/0.5%
Stereo separation: 40dB @ 1kHz
Selectivity ±400kHz: 65dB
Image rejection: 40dB
IF rejection: 70dB
DVD Player Section
Supported disc formats: 5-inch (12cm) or 3-inch (8cm) DVD Video, DVD-Audio,
standard-conforming DVD-R, DVD+R, DVD-RW, DVD+RW, VCD, CD, CD-R, CD-RW,
MP3 (up to 320kbps bitrate), or WMA (v7-v8) discs
Region code: 2
DVD layers: Single-side/single-layer, single-side/dual-layer, dual-side/dual-layer
Audio formats: Dolby Digital, linear PCM, MP3 (up to 320kbps bit rate),
Windows Media 7 or 8
Still-image format: JPEG
Video signal system: NTSC or PAL
Composite-video output: IV p-p/75 ohms, sync negative polarity
S-Video output: Y/luminance: IV p-p/75 ohms, sync negative polarity;
C/chrominance: 0.3V p-p
Frequency response: DVD (linear PCM): 20Hz–22kHz, ±1.0dB,
CD: 20Hz–22kHz ±1.0dB
Signal-to-noise ratio: 90dB (A-weighted)
Dynamic range: DVD/CD: 92dB (16-bit)
THD/1kHz: DVD/CD: 0.01%
Wow & flutter: Below measurable limits
Video Section
Television format: Automatic or PAL (selectable)
Output level/impedance: 1.0Vp-p/75 ohms
Video frequency response: (composite and S-Video) 10Hz–8MHz (–3dB)
HDMI™ version: 1.2
General
Power requirement: AC 100–240V ~ 50/60Hz
Power consumption: 300W maximum, 1W standby
Dimensions Unit Shipping
Height 98mm (3-7/8 inches) 197mm (7-3/4 inches)
Width 350mm (13-25/32 inches) 484mm (19-1/16 inches)
Depth 280mm (11 inches) 355mm (14 inches)
Weight: 3.5kg (7.7 lb) 6.1kg (13.4 lb)
Depth measurement includes terminal connections. Height measurement
includes feet and chassis.
Speaker System
Frequency response: 45Hz–20kHz (-6dB)
SAT TS60 Satellites (for HS 280)
Recommended power: 10 ~ 120 watts
Impedance: 8 ohms nominal
Sensitivity: 86dB @2.83V/1 meter
Tweeter: One 19mm (3/4") dome, video-shielded
Midrange: Dual 75mm (3") flat-panel drivers, video-shielded
Dimensions:
Height 299mm (11-25/32 inches)
Width 110mm (4-11/32 inches)
Depth 88mm (3-15/32 inches)
Weight: 1.5kg (3.3 lb)
Height measurement includes removable stands.
SAT-TS11 Satellites (for HS 210)
Recommended power: 10 ~ 120 watts
Impedance: 8 ohms nominal
Sensitivity: 86dB @ 2.83V/1 meter
Tweeter: One 1/2" (12mm) dome, video-shielded
Midrange: Dual 3" (75mm) drivers, video-shielded
Dimensions:
Height 243mm (9-9/16 inches)
Width 100mm (3-15/16 inches)
Depth 92mm (3-5/8 inches)
Weight: 1kg (2.2 lb)
HKTS200SUB Subwoofer
Input rating: AC 220–240V~, 50/60Hz, 200W
Amplifier power: 200 watts RMS
Woofer: 8" cone in a sealed enclosure
External trigger input voltage: 3 ~ 30 volts AC/DC
Dimensions (H x W x D):
Height 353mm (13-29/32 inches)
Width 267mm (10-1/2 inches)
Depth 267mm (10-1/2 inches)
Weight: 9kg (19.8 lb)
Height measurement includes the product’s feet.
Features, specifications and appearance are subject to change without notice.
harman/kardon
HS 2X0/230 Service Manual
Page 10 of 73

harman/kardon
HS 2X0/230 Service Manual
Page 11 of 73

harman/kardon
HS 2X0/230 Service Manual
Page 12 of 73

Item P/N Description Specification Qt
y
Location.No. Note
1 01.00.WJ.TJ.E1304 metals part HS280-chassis 1 HS280-PT01 0.8mm galvanized sheet,
natural color
2 01.00.WJ.TJ.E1481 metals part HS280-top cover 1 HS280-PT07 0.55mm galvanized and pre-
coated sheet, black color
3 617090000008 metals part HS2X0-rear panel 1 HS280-PT02 EU Version, 0.6mm
g
alvanized sheet
4 01.00.WJ.TJ.E1306 metals
p
art HS280-PCB bracket
(
Left
)
1 HS280-PT03 1.0mm
g
alvanized sheet
5 01.00.WJ.TJ.HS200.E006 metals
p
art HS200-PCB bracket
(
Ri
g
ht
)
1 HS200-PT0
5
6 01.00.WJ.TJ.HS200.E007 metals part HS200-Connected Piece for
Speaker Jack 4 HS200-PT06
7 01.00.WJ.TJ.E1307 Heatsin
k
HS280-Am
p
lifier Heatsink 1 HS280-PT0
5
U
p
on the U407 on AV Boar
d
8 01.00.WJ.TJ.E1336 Heatsin
k
HS280-Power Heatsin
k
1 HS280-PT04 For SMPS Board
9 01.00.WJ.TJ.E892 Heatsin
k
35*30*49mm 1 HS200-PT10 For SMPS Board
10 01.00.WJ.TJ.E893 Heatsink 16*12*51MM (The Hole's depth is 18MM）4For S503/S504/S505/S506 on SMPS
Board
11 01.00.WJ.TJ.E268 Heatsin
k
28*28*10mm 1 For U21 on Mainboard
12 01.00.WJ.TJ.E1379 Heatsink HS280 Heatsink-2, W24*H11*L23MM, 1 HS280-PT06, For U6,U17 on Mainboard
A
luminium alloy, Oxidation,
Black
13 030200000000
2
Ma
g
netism annulu
s
F5BRH12*27*5.6-P.
W
2 For Am
p
lifier Out
p
ut Cord
14 0616201100038 plastic part HS2X0-front panel 1 HS200-RE01
A
ntiflaming, ABS,94V0;
Black Color and S
p
ra
y
15 01.00.SJ.HS200.E002 plastic part HS200-2 in 1 Button 1 HS200-RE02
A
BS, Appointed Color and
S
p
ra
y
techni
q
ue
16 01.00.SJ.HS200.E003 plastic part HS200-Open button collar 1 HS200-RE03
A
BS, Appointed Color and
S
p
ra
y
techni
q
ue
17 01.00.SJ.HS100.E006 plastic part HS100-Volume Button Collar 1 HS100-RE06
A
BS, Spray argent color
(
Same as HS100
)
18 01.00.SJ.HS200.E00
4
p
lastic
p
art HS200-Button Cover Board 1 HS200-RE0
4
A
BS, Black
19 01.00.SJ.HS200.E005 plastic part HS200-Power Indicator lampshade 1 HS200-RE05 transparent ABS+dispersion
material
20 01.00.SJ.HS200.E00
6
p
lastic
p
art HS200-
p
edestal underla
y
2 HS200-RE0
6
trans
p
arent PV
C
21 01.00.SJ.HS200.E00
7
p
lastic
p
art HS200-Power Jack Jacke
t
1 HS200-RE0
7
A
ntiflamin
g
ABS,94V0, Black
22 01.00.SJ.HS200.E008 plastic part HS200-plastic scaleboard 1 HS200-RE08
A
BS, Black, For Speaker
Connected Board
23 0616170100034 plastic part HS2X0-Large Lens 1 HS200-RE10
Mitsubishi
3mm Black Lens (Include
47mm “harman/kardon”
Lo
g
o
)
24 01.00.SJ.HS100.E010 plastic part HS100-Volume Button 1 HS100-RE10 Rubber Lacquer Appointed by
client
25 01.00.SJ.HS100.E008 plastic part HS100-volume button lampshade 1 HS100-RE08 Transparent ABS +
dis
p
ersion material
26 01.00.SJ.1000A.E01
6
p
lastic
p
art 1000A-IR receiver su
pp
ort 5.5mm 1
27 01.00.SJ.QT.E019 VFD filter 124.5*33.5*0.5mm 1 material is as DVD22
28 01.40.CON.DCZ.E17
8
A
C
p
ower Jac
k
WS-044-0 1 EU Version
29 01.00.SB.E036 Metal lo
g
o 100mm "Harman/Kardon" Thin Lo
g
o 1 For to
p
cover
30 01.00.DP.JY.E135 Dust
p
roof for Disc tra
y
door of Loder LTD-1510 1 Black
31 01.00.DP.XJ.E192 Silica gel gasket 50.6*4.2*1.5mm (with #500 glue be single
sides
g
lued
)
4 For pedestal underlay HS100-H01
32 0305010000003 Diathermanous Selenium Rubber Gap Pad VO UItra
Soft,L15*W8*T0.3,sin
g
le sides
g
lued 1Between U407 and Amplifier Heatsink on
A
V board
33 01.00.DP.HM.E359 sponge 20*10*7MM (with #9448 glue be double
sides
g
lued
)
2 For VFD(2)
34 01.00.FZ.QT.153 Astigmatism PVC Φ45.5*Φ9.5mm 1 Between volume button and Front Panel
Board
35 01.00.FZ.QT.E253 Mask PVC
φ
38.5
(
Underside Glued
)
1 Inside the volume button Black PVC
36 01.00.DP.HM.E364 s
p
on
ge
10*10*7MM
(
with double sides
g
lued
)
1 For IR receiver
37 01.00.DP.HM.E378 High Soft sponge 124*10*2MM (with Single side glued) 1 paste in front of Disc tray door in the front
p
anel Black
38 01.00.DD.PM.E271 electric s
p
on
g
e 20*20*10MM 1 Between front
p
anel PCB and
p
lastic
p
ar
t
39 01.00.FZ.QT.E122 Plastic fastener 12CM 1 For
p
ower cord fastnes
s
40 01.00.DP.QT.E113 Sil-
p
ad sil-
p
ad 400-302
2
1 For Q509 on SMPS Board
41 031102000002
0
Insulated PVC HS280-H01
(
trans
p
arenc
y)
1 For SMPS Board
42 01.00.DP.JY.E249 Insulated PVC HS200-H0
2
1 Be buckled above volume button board
43 01.00.DP.JY.E541 Insulated PVC 22.5*10*0.3mm
(
with Sin
g
le side
g
lued
)
6 For hamulus of front
p
anel
44 01.00.WJ.JG.E328 Screw M3*6KBTTO 5
For front Panel and Left/Right sides of
chassis (4), Between two Heatsinks on
SMPS Board
(
1
)
45 01.00.WJ.JG.E543 Screw M3*6PWBTTNI 9 For pedestal underlay and chissis (9)
46 01.00.WJ.JG.E235 Screw M3*8PWBTTNI 5 For front panel and pedestal underlay and
chissis
(
3
)
; For AV Board and Heatsink
(
2
)
47 01.00.WJ.JG.E011 Scre
w
M1.7*4CBHNI 1 For Button cover Board and button Board
48 01.00.WJ.JG.E100 Screw M3*8PAHNI 10
For front panel and front panel board(9)
For plastic scaleboard and Speaker
Connected Board
(
1
)
49 01.00.WJ.JG.E472 Scre
w
M3*8PBTTNI 7 For ICs and Heatsinks on SMPS Board
(
7
)
50 01.00.WJ.JG.E085 Screw M3*6KBTTNI 2 For front panel and volume button board(2)
51 01.00.WJ.JG.E1044 Screw 1SZZR-0098J(M3*6.5,LG Appointed) 8 For Loader and chassis(4), For PCB
Brackets and chassis
(
4
)
52 01.00.WJ.JG.E795 Screw M3*6PWMHNI 13
For SMPS Board and chassis (5), For AV
Board and chassis (4), For Main Board and
PCB brackets
(
4
)
53 01.00.WJ.JG.E909 Screw M3*6BBTTO 1 For U type connect piece and rear panel(1)
54 01.00.WJ.JG.E1073 Screw M3*4BBTTNI 6
For rear panel and the bottom side of
chassis (2), For top cover and bottom side
of chassis
(
4
)
55 01.00.WJ.JG.E321 Scre
w
M3*8PAHO 7 For out
p
ut
j
acks
(
7
)
56 01.00.WJ.JG.E675 Scre
w
M3*10PAHO 2 For
p
lastic scaleboard and rear
p
anel
(
2
)
57 01.00.WJ.JG.E403 Screw M3*6PWBTTO 5 For top cover and chassis, top cover and
rear
p
anel
(
5
)
58 01.00.WJ.JG.E865 Scre
w
M3*12PMHO 2 For AC
p
ower socket
(
2
)
59 01.00.WJ.JG.E1083 Scre
w
M3*10PMHO 2 For SCART Jack
(
2
)
EU Vision
60 01.00.WJ.JG.E119 Nu
t
M3 2 For SCART Jack
(
2
)
EU Vision
61 01.00.WJ.JG.E119 Nu
t
M3 2 For
p
ower
j
ack2
)
62 01.00.WJ.JG.E426 Flat Pad M3*0.5 W=8 2 For Heatsink and AV Board
(
2
)
63 01.00.SJ.QT.E104 plastic rivet MBL3-2.5 2 For Insulated gasket and volume button
Board
64 01.00.WJ.JG.E424 S
p
rin
g
Pad M3 2 For Heatsink and AV Board
(
2
)
65 0504020000002 Speaker Terminal Connector H-HS2 copper Terminal Connector-Red
(
Surface
g
ilded
)
1
66 0504020000001 Speaker Terminal Connector H-HS2 copper Terminal Connector-Black
(
Surface
g
ilded
)
2
67 0504020000003 Speaker Terminal Connector H-HS2 copper Terminal Connector-White
(
Surface
g
ilded
)
1
68 01.00.DP.QT.E558 Pol
y
foam HS200 1
69 01.00.BZ.X.B.E511
A
ccessories bo
x
HS200 340*170*45mm 1 For accessorie
s
White
70 010802000000
8
Carton bo
x
HS2X
0
1
71 01.00.YS.FY3.E1600 Safet
y
and Warnin
g
instruction manual Harman/Kardon EU Version 1
72 01.00.YS.FY3.E1953 Su
pp
lement
p
a
g
e of Batteries treatment
A
4
p
a
p
er Size 1 12 Kinds of lan
g
ua
g
es, Harman/Kardo
n
73 101100000002
2
Owner manual HS2X0
(
HS280&HS210
)
EU Versio
n
1
74 01.00.YS.TZ.T.E068 Laser label Laser
p
recausion mar
k
1
75 01.00.YS.TZ.T.E057 Laser label Laser
p
recausion
g
uid
e
1
76 043100000001
0
Remote control RC-HS28
0
1 Outsourcin
g
, Blac
k
77 01.14.DX.B.E0007G
A
lkalescent batter
y
GP7# 3
78 01.00.BZ.D.S.E109 Plastic ba
g
for unit 47*50cm 1 For unit Packin
g
79 01.00.BZ.D.Z.E020 Plastic ba
g
25*35cm 1 For Owner manual Packin
g
Match for DVD21
80 01.00.BZ.D.Z.E034 Plastic ba
g
9*27.5CM 1 For Remote Control Packin
g
81 01.00.BZ.D.Z.E008 Plastic ba
g
6*9cm 1 For batter
y
Packin
g
82 01.00.BZ.D.H.E002 ROHS ba
g
11*28cm 1 For
p
ower cord
p
ackin
g
83 01.47.CNT.LJX.5.E211 HDMI Cord CBADV-S05-2 1 Outsourcin
g
84 01.47.CNT.ACX.E052 Power Cord WS-002E+WS-019 HO5VV-F 0.75×2C BK
2M 1 EU Vision
85 01.47.CNT.LJX.5.E05
8
Connect cable scart 1.5m 1 EU Vision
HS2X0 Component List
harman/kardon
HS 2X0/230 Service Manual
Page 13 of 73

Item P/N Description Specification Qty Location.No. Note
86 01.47.CNT.CTX.E016 Antenna FM-TV-22 (Lead content less than
300PPM) 1 EU Vision
87 01.15.JX.EDL05MHEA Loader DL-05MH-H40P(EA) 1 Foryou,Mabuchi EA motor
88 01.47.CNT.LJX.7.E603 Connect cable VH-3Y Connector-2Y-120mm(Be same
side) 1CN501 on SMPS Board to Power Jack with solder one end
89 01.47.CNT.LJX.7.E706 Connect cable VH-3Y Connector-2Y-2Y-60mm(Be same
side) 1CN506 on SMPS Board to CN400(L) on AV Board
90 0804020100006 Connect cable
NSCL-20090908-01,VH-4Y Connector-4P-
80mm(Be same side with color is White,
Black, Red and Black)
1
CN406 on AV Board to JP1.JP2 on
Speaker Connected Board with solder one
end
91 01.48.BPX.1.E147 Flat cable 1.0*14P*100mmA 2
CN4(A) on Mainboard to CN601(A) on
Front Panel Board*1, CN5(D) on
Mainboard to CN403(D) on AV board*1
92 01.48.BPX.1.E148 Flat cable 1.0*8P*100mmA 1 CN2(B) on Mainboard to CN603(B) on
Front Panel Board
93 01.48.BPX.1.E149 Flat cable 1.25*12P*80mmA(T=0.1mm) 1 CN3(C) on Mainboard to CN504(C) on
SMPS Board
94 01.48.BPX.1.E151 Flat cable 1.0*24P*80mmA 1 CN1(E) on Mainboard to CN401(E) on AV
Board
95 01.48.BPX.1.E167 Flat cable 1.0*20P*80mmA 1 CN6(F) on Mainboard to CN404(F) on AV
Board
96 01.48.BPX.1.E153 Flat cable 1.25*14P*70mmA(T=0.1mm) 1 CN503(H) on SMPS Board to CN602(H) on
Front Panel Board
97 01.48.BPX.1.E154 Flat cable 1.0*6P*40mmA 1 CN604(J)on Front Panel Board to
CN605(J) on Volume Button Board
98 01.48.BPX.1.E155 Flat cable 1.25*9P*60mmA(T=0.1mm) 1 CN505(K) on SMPS Board to CN405(K) on
AV Board
99 01.48.BPX.1.E156 Flat cable 1.0*12P*220mmA 1 For Loader and CN9 on Main Board
100 01.48.BPX.1.E028 Flat cable 0.5*24P*200mmA 1 For Loader and CN2 on Main Board
101 01.37.PCB.2.E6314C Speaker Connected Board 6314C 1 2-layers
102 02.11HAV09M5982C01 Mainboard (semi-manufactured goods) HAV09M-5982C01 (EU Vision+Hitachi
Loader) 1 4-layers
103 02.14HAV09I5983C01 AV Board (semi-manufactured goods HAV09I-5983C01 (EU Vision 1 2-layers
104 0219HAV08P6144C2X0 SMPS Board (semi-manufactured goods) HAV08P-6144 1 2-layers. Power supply board.
105 7001200100001 Front Panel Board (semi-manufactured
goods) 6742C 1 2-layers
106 7001200100002 Volume Button Board (semi-
manufactured goods) 6743C 1 2-layers
Item P/N Description Specification Qty Location.No. Note
1 01.57.R.2.E000J Resistor, chip 0603-0Ω ±5% 19
R146 R158 R159 R160 R162 R164 R165
(R198) R227 R233 R235 R266 R268 R281
R59 R278 R279 R280 (R291)
2 01.57.R.2.E020J Resistor, chip 0603-2Ω±5% 1 R21
3 01.57.R.2.E100J Resistor, chip 0603-10Ω±5% 2 (R22) (R92)
4 01.57.R.2.E220F Resistor, chip 0603-22Ω±1% 1 R286
501.57.R.2.E220J Resistor, chip 0603-22Ω±5% 42
R29 R30 R35 (R39) R42 R56 R63 R64 R65
R68 R73 R74 R75 R82 R83 R84 R105
R106 R107 R108 R109 R112 R113 R114
R115 R116 R123 R124 R125 R183 R184
R185 (R224) R195 R246 R40 R78 R79
R141 R186 R190 R196
6 01.57.R.2.E330J Resistor, chip 0603-33Ω±5% 6 R55 R57 R60 R143 R208 R259
7 01.57.R.2.E430J Resistor, chip 0603-43Ω±5% 1 (R24)
8 01.57.R.2.E49R9F Resistor, chip 0603-49.9Ω±1% 10 (R93) (R94) (R95) (R96) (R212) (R213)
(R214) (R215) R216 R217
9 01.57.R.2.E680F Resistor, chip 0603-68Ω±1% 3 R229 R250 R254
10 01.57.R.2.E750F Resistor, chip 0603-75Ω±1% 10 R228 R231 R234 R240 R241 R244 R245
R253 R206 R211
11 01.57.R.2.E820F Resistor, chip 0603-82Ω±1% 2 R20 R252
12 01.57.R.2.E101J Resistor, chip 0603-100Ω±5% 14
R46 R230 R236 R237 (R238) R264 R265
(R282) (R283) R58 (R151) (R150) R179
R180
13 01.57.R.2.E271J Resistor, chip 0603-270Ω±5% 1 (R139)
14 01.57.R.2.E301J Resistor, chip 0603-300Ω±5% 1 R178
15 01.57.R.2.E331J Resistor, chip 0603-330Ω±5% 3 R45 R103 R104
16 01.57.R.2.E391J Resistor, chip 0603-390Ω±5% 1 R134
17 01.57.R.2.E471J Resistor, chip 0603-470Ω±5% 3 R156 R157 (R239)
18 01.57.R.2.E511F Resistor, chip 0603-510Ω±1% 1 R285
19 01.57.R.2.E102F Resistor, chip 0603-1KΩ±1% 1 R19
20 01.57.R.2.E102J Resistor, chip 0603-1KΩ±5% 6 (R51) (R52) R61 R62 (R275) R194
21 01.57.R.2.E152J Resistor, chip 0603-1.5KΩ±5% 2 (R101) (R102)
22 01.57.R.2.E162J Resistor, chip 0603-1.6KΩ±5% 1 R177
23 01.57.R.2.E182J Resistor, chip 0603-1.8KΩ±5% 2 (R267) (R269)
24 01.57.R.2.E222J Resistor, chip 0603-2.2KΩ±5% 1 (R276)
25 01.57.R.2.E332J Resistor, chip 0603-3.3KΩ±5% 2 (R271) (R272)
26 01.57.R.2.E472J Resistor, chip 0603-4.7KΩ±5% 32
(R3) (R6) (R7) (R10) (R11) (R13) (R15)
R18 R25 R26 R27 R28 R43 (R44) R47 R53
R69 (R71) R72 R85 R86 R87 R88 R89
(R126) (R133) R135 R138 (R182) (R242)
R261 R140
27 01.57.R.2.E103J Resistor, chip 0603-10KΩ±5% 22
(R91) (R97) (R98) (R99) (R110) (R117)
R136 R137 R148 R149 R161 R166 R169
R170 R171 R172 (R197) R218 R219 R220
(R222) R270
28 01.57.R.2.E123F Resistor, chip 0603-12KΩ±1% 3 (R2) R37 R155
29 01.57.R.2.E1212F Resistor, chip 0603-12.1KΩ±1% 1 (R131)
30 01.57.R.2.E153J Resistor, chip 0603-15KΩ±5% 3 R163 R210 R209
31 01.57.R.2.E203J Resistor, chip 0603-20KΩ±5% 1 R152
32 01.57.R.2.E223F Resistor, chip 0603-22KΩ±1% 1 (R1)
33 01.57.R.2.E393J Resistor, chip 0603-39KΩ±5% 1 R167
34 01.57.R.2.E473J Resistor, chip 0603-47KΩ±5% 5 R144 R147 R175 R176 R262
35 01.57.R.2.E104J Resistor, chip 0603-100KΩ±5% 15 R9 R31 R32 (R33) R34 R38 R49 R66 R67
R90 R192 R203 R205 R207 (R41)
36 01.57.R.2.E105J Resistor, chip 0603-1MΩ±5% 2 (R168) (R36)
37 01.57.R.3.E000J Resistor, chip 0805-0Ω ±5% 1 R132
38 01.57.R.3.E4R7J Resistor, chip 0805-4.7Ω±5% 2 (R154) (R153)
39 01.57.R.8.EP2204 Resistor, thick film chip network 0603-22Ω*4 ±5% 22
RN2 RN3 RN4 RN5 RN6 RN8 RN10 RN12
RN14 RN24 RN27 RN29 RN30 RN31
RN33 RN34 RN35 RN36 RN37 RN38
RN39 RN40
40 01.57.R.8.EP3304 Resistor, thick film chip network 0603-33Ω*4 ±5% 8 RN19 RN21 RN22 RN23 RN25 RN26
RN28 RN32
41 01.57.R.Y.E270 Voltage Dependent Resistor, TDK AVR-M1608C270MTABB SMD 2 ESD3 ESD2
42 01.57.R.R.E050 Thermal Dependent Resistor, JinKe JK-MSMD050 SMD 1 PTC1
43 01.54.CS.2.E150N50V Capacitor, multilayer ceramic, chip 0603-15P NPO±5%/50V 1 (C241)
44 01.54.CS.2.E200N50V Capacitor, multilayer ceramic, chip 0603-20P NPO±5%/50V 6 (C70) (C68) (C119) (C127) (C20) (C21)
45 01.54.CS.2.E151N50V Capacitor, multilayer ceramic, chip 0603-150P NPO±5%/50V 2 C128 C129
46 01.54.CS.2.E681N50V Capacitor, multilayer ceramic, chip 0603-680P NPO±5%/50V 2 C97 C120
47 01.54.CS.2.E122X50V Capacitor, multilayer ceramic, chip 0603-122 X7R±10%/50V 1 C108
48 01.54.CS.2.E152X50V Capacitor, multilayer ceramic, chip 0603-152 X7R±10%/50V 1 C123
49 01.54.CS.2.E332X50V Capacitor, multilayer ceramic, chip 0603-332 X7R±10%/50V 1 C109
50 01.54.CS.2.E392X50V Capacitor, multilayer ceramic, chip 0603-392 X7R±10%/50V 1 (C239)
51 01.54.CS.2.E103Y50V Capacitor, multilayer ceramic, chip 0603-103 Y5V-20+80%/50V 6 C3 (C6) (C8) C74 C75 (C111)
52 01.54.CS.2.E103XT50V Capacitor, multilayer ceramic, chip 0603-103 X7R±5%/50V 1 (C15)
53 01.54.CS.2.E223X50V Capacitor, multilayer ceramic, chip 0603-223 X7R±10%/50V 1 (C76)
HS2X0 Component List
HS2X0 Component List for Mainboard (5982C)
harman/kardon
HS 2X0/230 Service Manual
Page 14 of 73

Item P/N Description Specification Qt
y
Location.No. Note
54 01.54.CS.2.E104Y50V Capacitor, multilayer ceramic, chip 0603-104 Y5V-20+80%/50V 133
C1 (C2) C4 (C5) C7 C9 (C10) C11 (C12)
(C13) (C14) (C16) C17 C18 C19 (C22)
C23 (C24) C25 C26 C27 (C28) (C29) (C30)
(C31) (C32) (C33) (C34) (C35) (C36) (C38)
(C40) (C41) (C42) (C43) (C44) C45 (C46)
(C47) (C48) (C49) (C50) (C51) (C52) (C53)
C54 (C55) (C56) (C57) (C58) C59 C61
(C65) (C66) (C71) (C72) (C73) C79 C82
C83 (C84) (C85) (C86) (C88) (C89) C90
C91 C92 C93 C94 (C96) (C98) C99 (C100)
(C101) (C102) C103 (C105) C106 (C107)
C110 C112 C113 C114 C115 (C116)
(C117) (C118) (C121) (C124) (C125)
(C126) C130 C131 C132 C133 (C134)
C135 C136 (C138) (C139) (C140) C141
(C142) (C143) (C144) (C145) (C146)
(C147) C148 (C149) (C150) (C151) (C152)
(C153) (C154) (C155) C160 C163 C164
C165 C166 C167 C168 C169 C170 C171
C172 C173 (C174) C175 C176 C177
55 01.54.CS.2.E474X10
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0603-474 X7R±10%/10
V
1 C122
56 01.54.CS.2.E105X16
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0603-105 X7R±10%/16
V
5
(
C60
)
C62 C63
(
C104
)
C23
8
57 01.54.CS.2.E104Y50V Capacitor, multilayer ceramic, chip 0603-104 Y5V-20+80%/50V 54
C178 (C179) C180 (C181) (C182) (C183)
(C184) (C185) (C186) (C187) (C188)
(C189) (C190) (C191) (C192) (C193)
(C194) C195 (C198) C199 (C200) (C201)
(C202) (C203) C204 (C205) (C206) (C207)
(C208) (C209) (C210) (C211) (C212)
(C213) (C214) (C215) (C216) (C217)
(C218) (C219) (C220) (C221) (C222)
(C223) (C224) (C225) (C230) C231 C232
C233 (C234) C236 (C237) C240
58 01.54.CS.2.E475X16
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0603-475 X7R ±10%/16
V
1
(
C37
)
59 01.54.CS.3.E106X16
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0805-106 X7R±10%/16
V
4 C87 C228 C229 C23
5
60 01.54.CS.3.E335Y16
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0805-335 Y5V-20+80%/16
V
2 C244 C24
5
61 01.54.CS.3.E475X16
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0805-475 X7R±10%/16
V
1 C243
62 01.54.CS.B.E1023K
V
Ca
p
acitor, multila
y
er ceramic, chi
p
1812-102/3K
V
2 C69 C9
5
63 01.35.CC.E120622U10
V
Ca
p
acitor, multila
y
er ceramic, chi
p
ECJMFF1A226Z 1 C64
64 01.34.CL.D.E10U16V
C
Ca
p
acitor, AL.electrol
y
tic CD110-10UF/16V 5*11 2 CE12 CE41
65 01.34.CL.D.E22U16V
C
Ca
p
acitor, AL.electrol
y
tic CD110-22UF/16V 5*11 6 CE51 CE52 CE56 CE48 CE49 CE5
0
66 01.34.CL.D.E47U10V
C
Ca
p
acitor, AL.electrol
y
tic CD110-47UF/10V 5*11 5 CE3 CE6 CE29 CE46 CE5
8
67 01.34.CL.D.E47U16V
C
Ca
p
acitor, AL.electrol
y
tic CD110-47UF/16V 5*11 3 CE14 CE16 CE1
7
68 01.34.CL.D.E100U10V
D
Ca
p
acitor, AL.electrol
y
tic CD110-100UF/10V 5*1
2
6 CE1 CE2 CE9 CE47 CE57 CE6
2
69 01.34.CL.D.E100U16VC Capacitor, AL.electrolytic CD110-100UF/16V 5*11 17
CE4 CE10 CE11 CE15 CE18 CE19 CE20
CE21 CE32 CE34 CE37 CE39 CE40 CE42
CE60 CE61 CE6
3
70 01.34.CL.D.E220U16VD Capacitor, AL.electrolytic CD110-220UF/16V 6.3*12 7 CE7 CE8 CE31 CE33 CE35 CE36 CE38
71 01.34.CL.D.E470U10V
D
Ca
p
acitor, AL.electrol
y
tic CD110-470UF/10V 6.3*1
2
1 CE13
72 01.34.CL.D.E1000U10V
E
Ca
p
acitor, AL.electrol
y
tic CD110-1000UF/10V 8*1
4
1 CE30
73 01.38.FUSE.S.EJK110 Pol
y
er Positive Tem
p
erature Coefficent JK-110
(
1.1A
)
SMD 1 PTC3
74 01.13.L.Z.ESA50 Bead, chip 0603-50Ω10 FB6 FB23 FB24 FB25 FB16 FB17 FB18
FB20 FB41 FB44
75 01.13.L.Z.ESA120 Bead, chi
p
0603-120
Ω
1
(
FB22
)
76 01.13.L.Z.ESB50 Bead, chip 0805-50Ω11 FB8 (FB9) FB10 FB11 (FB12) (FB14)
FB39 FB19 FB26 FB42 FB43
77 01.13.L.Z.ESB220 Bead, chi
p
0805-220
Ω
1 FB21
78 01.13.L.Z.ESC50 Bead, chi
p
1206-50
Ω
4 FB7 FB37 FB38
(
FB40
)
79 01.13.L.Z.ED50A Bead, leaded fixed 50Ω（3.5*6.0*0.8）10 FB1 FB2 FB3 FB4 FB5 FB13 FB15 FB27
FB35 FB36
80 01.13.L.L.S.E007 Inductor, multilayer ceramic, chip 0805-10UH SMD 12 (L1) L2 (L3) L4 L5 L6 L8 L9 L10 L11 L13
L14
81 01.13.L.L.S.E320 Inductor, SMD SPI1048QR-150
(
15uH/3A
)
SM
D
1 L19
82 01.13.L.L.S.E242 Inductor, multila
y
er ceramic, chi
p
, TDK
A
CM2012-900-2P SM
D
4 L15 L16 L17 L1
8
83 01.41.D.PS.EB340L
A
Diode B340LA SMD 1 D1
84 01.41.D.PD.E539
3
Diode IN5393 DIP 3 D5 D10 D11
85 01.41.D.PS.ELL414
8
Diode LL4148 SMD 1 D4
86 01.41.D.PS.EBAV99 Diode BAV99LT1,SOT23 (or
LBAV99L1G,SOT23
)
3 D12 D13 D14
87 01.42.Q.S.E1132 Transisto
r
2SB1132,SOT89 2 Q5 Q6
88 01.42.Q.S.ET3904 Transisto
r
MMBT3904,SOT23 1 Q3
89 01.42.Q.S.E2N390
6
Transisto
r
2N3906,SOT23 1 Q2
90 01.42.Q.S.EC8550 Transisto
r
KTC8550,SOT23 3 Q1 Q4 Q7
91 01.42.Q.S.E8050 Transisto
r
KTC8050,SOT23 1 Q10
92 0218020000007 Crystal Oscillator 7050 OSC-50.000MHz,50.000MHz,
-
25PPM~+25PPM,3.3V,SMD 1Y3
93 01.00.JZ.E27000 Quart
y
z Cr
y
stal Unit 27.000MHZ-49S-20
P
2 Y2 Y4
94 01.00.JZ.E24000
C
Quart
y
z Cr
y
stal Unit 24.000MHZ-49S-20
P
1Y5
95 01.44.IC.D.EL780
5
IC, ST, Volta
g
e Re
g
ulator L7805,TO-220 1 U22
96 01.46.IC.EK4S561632JUC60 IC, Samsung , SDRAM K4S561632J-UC60(TSOP54,256M,SMD) 1 U7
97 01.46.IC.EK4S643232HUC6
0
IC, Samsun
g
, SDRAM K4S643232H-UC60
(
TSOP86,64M,SMD
)
1 U31
98 01.44.IC.S.EA11173V
3
IC, AAC, LDO
A
Z1117H-3.3,SOT-223 3 U1 U4 U11
99 01.44.IC.S.EA11171V
8
IC, AAC, LDO
A
Z1117H-1.8,SOT-223 2 U2 U23
100 01.44.IC.S.E1117 IC, AAC, LDO
A
Z1117H-ADJ,SOT-223 1 U3
101 01.44.IC.S.EMP1411DH IC,MPS,Ste
p
-Down Converte
r
MP1411DH,MSOP-1
0
1 U28
102 01.46.IC.EAML821
8
IC, Amlo
g
ic, A/V Processor
A
ML8218
(
PQFP-216,SMD
)
1U6
103 01.46.IC.EFLI2310 IC, ST, Di
g
ital Video Format Converter FLI2310-LF-CF,PQFP-208,SMD 1 U21
104 01.46.IC.ETMD8809X0
2
IC, TAMUL, MPEG Processo
r
TMD8809X02
(
160-LQFP-2424,SMD
)
1 U17
105 01.46.IC.EK9F1G08UOB IC, Samsung, Flash K9F1G08UOB-PCBO SMD,48-TSOP1-
1220F 1 U9 firmware burn-in
106 01.46.IC.EW25X16VSSIG IC, Winbond, Flash W25X16VSSIG
(
SOIC-8,SMD
)
1 U18 firmware burn-in
107 01.46.IC.EW9812G6GH IC, Winbond, SDRAM W9812G6GH-6 SMD,54L-TSOP2-400mil 1 U19
108 01.44.IC.S.EAM5888 IC, AMtek, Motor Driver
A
M5888 SMD,HSOP2
8
1 U15
109 01.44.IC.S.EFMS6143 IC, Fairchild, Video Filter Driver FMS6143CSX
_
NL
(
SOIC-8,SMD
)
1 U20
110 01.46.IC.ESII9034CTU IC, Silicon Ima
g
e, HDMI Transmitter SII9034CTU
(
TQFP-100,SMD
)
1 U24
111 01.44.IC.D.EPC817 IC, Shar
p
, Photoelectric Cou
p
ler PC817 DIP 1 U14
112 01.46.IC.EUSB2514AEZG IC, SMSC, USB HUB Controller USB2514-AEZG
(
QFN-36,SMD
)
1 U32
113 01.46.IC.ESN74ALVC244P
W
IC, TI, Octal Buffer with 3-State out
p
uts SN74ALVC244PW
(
TSSOP-20,SMD
)
1 U29
114 01.46.IC.ESN74AUP1G80DC
K
IC, TI, D-T
yp
e FLIP-FLOP SN74AUP1G80DCK
(
SC-70,SMD
)
1U8
115 01.46.IC.ELAN8700CAEZG IC, SMSC, Ethernet Transceiver LAN8700C-AEZG
(
QFN-36,SMD
)
1 U12
116 01.44.IC.S.E3522 IC, Analo
g
Tech., Reset Circuit
A
AT3522 SMD,SOT-23 1 U5
117 01.44.IC.S.E0514 IC, Semtech, Lo
w
Capacitance TVS
Diode Arra
y
RClamp0514M SMD,MSOP-10L 4 U25 U26 U27 U30
118 01.46.IC.EMK900 IC, Multek, Lisence Chi
p
MK-900
(
SOP14,MCU,SMD
)
1 U34 Burn code: MK90
8
119 01.44.IC.S.EFST3257MTC IC, Fairchild, Multiplexer/Demultiplexer
Bus Switch FST3257MTC SMD 1 U36 FAIRCHILD
120 01.40.CON.DCZ.E316 HDMI Jac
k
1747981-1 SM
D
1 JP7 51UO19S-331N-A SM
D
121 01.13.L.R.E13
5
Ethernet Transforame
r
13F-38ANL SMD 1 U35
122 01.40.CON.DDZ.EDSW-30 S-Vidio Connecto
r
DSW-30 1 JP5
123 01.40.CON.DCZ.E04
5
Jac
k
A
V1-8.4-8G 1 JP6
A
ntiflamin
g
, Yellow Color
124 01.40.CON.DCZ.E857 RJ45 Jac
k
26LM90-37121-01 1 JP1 Yilian
125 01.40.CON.DCZ.E217 USB Jac
k
USB-A-05
(
ROHS, Mother Set
)
1 JP4
126 01.40.CON.DCZ.E203 IR in/out
j
ack CKX-3.5-2
2
2 JP2 JP3
127 01.40.CON.S10.FPC1.E01
5
FPC Connector, SMD FPC-1.0-12P with u
p
ward touc
h
1 CN9
128 01.40.CON.S13.FPC2.E00
3
FPC Connecto
r
1.25-12P Vertical T
yp
e and Dual Conac
t
1 CN3 Black
129 01.40.CON.S10.FPC2.E00
2
FPC Connecto
r
1.0-8P Vertical T
yp
e and Dual Conac
t
1 CN2 Black & Antiflamin
g
130 01.40.CON.S10.FPC2.E03
0
FPC Connecto
r
1.0-14P Vertical T
yp
e and Dual Conac
t
2 CN5 CN4 Black
131 01.40.CON.S10.FPC2.E031 FPC Connecto
r
1.0-20P Vertical T
yp
e and Dual Conac
t
1 CN6 Black
132 01.40.CON.S10.FPC2.E00
3
FPC Connecto
r
1.0-24P Vertical T
yp
e and Dual Conac
t
1 CN1 Black & Antiflamin
g
133 01.40.CON.S05.E00
7
FPC connector, SMD FPC-0.5-24P with u
p
ward touc
h
1 CN10
134 01.00.WJ.TJ.HS650.E002 Metal Part HS650DL-U t
yp
e connect
p
iec
e
1H1
135 01.37.PCB.4.E5982C PCB Board-Mainboard without
com
p
onent
s
5982C 1
HS2X0 Component List for Mainboard (5982C)
harman/kardon
HS 2X0/230 Service Manual
Page 15 of 73

Item P/N Description Specification Qt
y
Location.No. Note
1 01.57.R.1.E000J Resistor, chi
p
0402-0Ω±5
%
1 4R38
2 01.57.R.1.E220J Resistor, chi
p
0402-22Ω±5
%
5 4R31 4R32 4R39 4R40 4R41
3 01.57.R.1.E101J Resistor, chi
p
0402-100Ω±5
%
2 4R33 R42
5
4 01.57.R.1.E202J Resistor, chi
p
0402-2KΩ±5
%
2 4R29 4R3
0
5 01.57.R.1.E472J Resistor, chi
p
0402-4.7KΩ±5
%
1 4R53
6 01.57.R.2.E000J Resistor, chip 0603-0Ω ±5% 24
4R06 4R08 4R09 4R11 4R12 R441 R442
R443 R445 4R45 R446 4R49 R453 R454
R455 R456 R457 R461 R462 R463 R464
4R52 4R51 R44
9
7 01.57.R.2.E100J Resistor, chi
p
0603-10Ω±5
%
4 4R43 4R44 4R46 4R4
7
8 01.57.R.2.E561J Resistor, chi
p
0603-560Ω±5
%
2 4R17 4R2
3
9 01.57.R.2.E750F Resistor, chi
p
0603-75Ω±1
%
3 4R25 4R20 R42
7
10 01.57.R.2.E101J Resistor, chi
p
0603-100Ω±5
%
1 R467
11 01.57.R.2.E111J Resistor, chi
p
0603-110Ω±5
%
2 R428 R43
5
12 01.57.R.2.E471J Resistor, chi
p
0603-470Ω±5
%
6 R472 R477 R479 R481 R483 R48
5
13 01.57.R.2.E751F Resistor, chi
p
0603-750Ω±1
%
1 R431
14 01.57.R.3.E221F Resistor, chi
p
0805-220Ω1
%
2 R436 R401
15 01.57.R.2.E102J Resistor, chi
p
0603-1KΩ±5
%
4 R419 R405 R408 R41
0
16 01.57.R.2.E162F Resistor, chi
p
0603-1.6KΩ±1
%
1 R415
17 01.57.R.2.E222J Resistor, chi
p
0603-2.2KΩ±5
%
3 4R18 4R26 4R5
0
18 01.57.R.2.E332J Resistor, chi
p
0603-3.3KΩ±5
%
5 R407 R409 R412 R413 R42
3
19 01.57.R.2.E472J Resistor, chi
p
0603-4.7KΩ±5
%
2 4R28 4R21
20 01.57.R.2.E622F Resistor, chi
p
0603-6.2KΩ±1
%
1 R429
21 01.57.R.2.E103J Resistor, chi
p
0603-10KΩ±5
%
6 R414 R417 R418 R420 R421 R42
2
22 01.57.R.2.E473J Resistor, chi
p
0603-47KΩ±5
%
3 4R22 4R27 4R4
8
23 01.57.R.2.E104J Resistor, chip 0603-100KΩ±5% 7 4R19 4R24 R459 R460 R466 R468 R469
24 01.57.R.4.E102J Resistor, chi
p
1206-1KΩ±5
%
1 R406
25 01.57.R.4.E202J Resistor, chi
p
1206-2KΩ±5
%
2 R403 R40
4
26 01.57.R.Y.E270 Voltage Dependent Resistor, TDK AVR-M1608C270MTABB SMD 8 ESD401 ESD402 ESD405 ESD406
ESD407 ESD408 ESD410 ESD40
9
27 01.57.R.C.E220 FIXED CARBON FILM CR1/2WT/B22Ω±5%(RT,22Ω,±5%,1/2W,DI
P
)
2 R438 R437
28 01.54.CS.1.E103X50
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0402-103 X7R±10%/50
V
1 C400
29 01.54.CS.1.E104X10
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0402-104 X7R ±10%/10
V
1 C490
30 01.54.CS.1.E223X25
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0402-223 X7R±10%/25
V
1 C487
31 01.54.CS.2.E180N50
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0603-18P NPO±5%/50
V
2 C415 C41
6
32 01.54.CS.2.E270N50
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0603-27P NPO±5%/50
V
1 C410
33 01.54.CS.2.E331N50
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0603-330P NPO±5%/50
V
6 C420 C422 C424 C426 C428 C43
0
34 01.54.CS.2.E103X50V Capacitor, multilayer ceramic, chip 0603-103 X7R±10%/50V 9 C432 C440 C441 C442 C443 C479 C483
C484 C48
6
35 01.54.CS.2.E104Y50V Capacitor, multilayer ceramic, chip 0603-104 Y5V-20+80%/50V 25
C401 C402 C407 C408 C411 C414 C417
C431 C433 C434 C435 C436 C437 C438
C439 C444 C445 C446 C447 C480 C481
C482 C485 4C02 C403
36 01.54.CS.2.E104X50
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0603-104 X7R±10%/50
V
6 C453 C454 C463 C469 C473 C49
7
37 01.54.CS.2.E333X50
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0603-333 X7R±10%/50
V
4
(
C493
)
(
C494
)
(
C495
)
(
C496
)
38 01.54.CS.2.E473X50
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0603-473 X7R±10%/50
V
3 C404 C405 C41
8
39 01.54.CS.3.E102N50
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0805-102 NPO±5%/50
V
4
(
C450
)
(
C459
)
(
C466
)
(
C476
)
40 01.54.CS.3.E103X50
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0805-103 X7R±10%/50
V
4
(
C451
)
(
C460
)
(
C467
)
(
C477
)
41 01.54.CS.3.E104X50
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0805-104 X7R±10%/50
V
4 C458 C465 C474 C47
5
42 01.54.CS.3.E475X16
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0805-475 X7R±10%/16
V
6 C419 C421 C423 C425 C427 C42
9
43 01.54.CS.3.E106X16
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0805-106 X7R±10%/16
V
4 4C00 C406 C498 C49
9
44 01.54.CS.3.E226X6V
3
Ca
p
acitor, multila
y
er ceramic, chi
p
0805-226 X7R±20%/6.3
V
1 4C05
45 01.54.CS.4.E104X50
V
Ca
p
acitor, multila
y
er ceramic, chi
p
1206-104 X7R±10%/50
V
4
(
C448
)
(
C462
)
(
C464
)
(
C478
)
46 01.54.CS.4.E105X50
V
Ca
p
acitor, multila
y
er ceramic, chi
p
1206-105 X7R±10%/50
V
4 C461 C468 C470 C471
47 01.34.CL.D.E10U10V
C
Ca
p
acitor, AL.electrol
y
tic CD110-10UF/10V 5*11 2 CE426 CE42
7
48 01.34.CL.D.E10U16V
C
Ca
p
acitor, AL.electrol
y
tic CD110-10UF/16V 5*11 1 CE421
49 01.34.CL.D.E470U6V
3
Ca
p
acitor, AL.electrol
y
tic 470uF/6.3V 6.3*12 ±20% 10
5
℃1 CE419
50 01.34.CL.D.E22U16V
C
Ca
p
acitor, AL.electrol
y
tic CD110-22UF/16V 5*11 4 CE408 CE414 CE415 CE41
6
51 01.34.CL.D.E47U10V
C
Ca
p
acitor, AL.electrol
y
tic CD110-47UF/10V 5*11 2 CE425 CE40
5
52 01.34.CL.D.E47U25VC1 Ca
p
acitor, AL.electrol
y
tic CD110-47UF/25V 5*11 2 CE417 CE42
8
53 01.34.CL.D.E100U10V
D
Ca
p
acitor, AL.electrol
y
tic CD110-100UF/10V 5*1
2
1 CE402
54 01.34.CL.D.E100U16V
C
Ca
p
acitor, AL.electrol
y
tic CD110-100UF/16V 5*11 4 CE418 CE420 CE422 CE42
3
55 01.34.CL.D.E330U16V
D
Ca
p
acitor, AL.electrol
y
tic CD110-330UF/16V 6.3*1
2
2 CE411 CE41
2
56 01.34.CL.D.E1000U50V
H
Ca
p
acitor, AL.electrol
y
tic GF102M050I250
A
3 CE400 CE406 CE40
7
CAPXON
57 01.33.CT.EA3U310V Solid Electrolyte Tantalum Chip
Ca
p
acito
r
A-3.3UF-10V 1 CA400 Can Replaced by
T491A335K016A
T
58 01.00.CD.DL.E474100
V
Ca
p
acitor,
p
ol
y
ester film 474J/100V DIP 2 C472 C45
5
FaLa, XiaMen
59 01.13.L.L.S.E434 Inductor, SMD CS0603-R27J-S(0603,270NH,±2%,High
-
fre
q
uenc
y
,SMD
)
1 L405
60 01.13.L.Z.ESA50 Bead, chi
p
0603-50
Ω
2 FB405 FB406
61 01.13.L.Z.ESB50 Bead, chip 0805-50Ω6 FB408 FB411 FB413 FB414 FB415 FB416
62 01.13.L.Z.ED50
A
Bead, leaded fixed 50Ω（3.5*6.0*0.
8
）1 FB409
63 01.13.L.L.D.E127 Magnetic shielding Inductor 983BN-1003-15UH 4 L401 L402 L403 L404 Can Replaced by THI1315
-
150
64 01.00.JZ.E20250 Quart
y
z Cr
y
stal Unit 20.250MHz-49S 18P/±20PP
M
1 Y400 SJK
65 01.00.JZ.E32768Y Crystal Oscillator 32.768KHZ 3.3V 5*3.2mm SMD 1 Y403
Can Replaced by 5032 OSC
-
0.032768MHZ,32.768KHZ,±2
5PPM,3.3V,SMD
66 01.41.D.PS.ELL414
8
Diode LL4148 SMD 2 D400 D401
67 01.41.D.PS.EBAV99 Diode BAV99LT1 SMD 2 D403 D402 Can Replaced by
LBAV99L1G SMD
68 01.42.Q.S.E8050 Transisto
r
KTC8050 SMD 1 Q400 SOT23
69 01.42.Q.S.EC8550 Transisto
r
KTC8550 SMD 3 Q404 Q405 Q409 SOT23
70 01.42.Q.S.EDTC343 Transistor DTC343TKT146 SMD 7 Q401 Q402 Q406 Q407 Q408 Q410 Q411
71 01.44.IC.D.EL780
8
IC, ST, LDO L7808C-V DIP, TO-220 1 U405
72 01.44.IC.S.EC5FP IC, Rohm, LDO BA00HC5FP SMD, T0252-
5
1 U404
73 01.46.IC.EMAP5601ME5900 IC, Micronas, Audio Processor MAP5601M-E5-900(PMQFP-128-2,SMD) 1 U403
74 01.46.IC.ETAS5352DD
V
IC, TI, Stereo Di
g
ital Am
p
lifier TAS5352DDV
(
HTSSOP-44,SMD
)
1 U407
75 01.46.IC.ESI4705B20GM IC, Silicon labs, FM Radio Receiver SI4705-B20-GM
(
QFN-36,SMD
)
1 U408
76 01.44.IC.S.EFST3257MTC IC, Fairchild, Analo
g
Switch FST3257MTC SMD 1 U411
77 01.44.IC.S.E3522 IC, Analo
g
ic Tech, Reset monitor
A
AT3522 SMD,SOT-23 1 U406
78 01.44.IC.S.EV330 IC, TI, Video Switch FSAV330 SMD 1 U409 Can Replaced by SGM330A
SMD
79 01.46.IC.EW25X80SS IC, Winbon, Flash W25X80-SS SMD 1 U410 Can Replaced by A25L080M-
F/G, firmware burn-in
80 01.46.IC.E74H0
4
IC, TI, Hex Inverter 74HCU04 SM
D
1 U401 TSSOP14
81 01.40.CON.S13.FPC2.E00
4
FPC Connecto
r
1.25-9P Vertical T
yp
e and Dual Conac
t
1 CN40
5
Black
82 01.40.CON.S10.FPC2.E03
0
FPC Connecto
r
1.0-14P Vertical T
yp
e and Dual Conac
t
1 CN403 Black
83 01.40.CON.S10.FPC2.E031 FPC Connecto
r
1.0-20P Vertical T
yp
e and Dual Conac
t
1 CN404 Black
84 01.40.CON.S10.FPC2.E00
3
FPC Connecto
r
1.0-24P Vertical T
yp
e and Dual Conac
t
1 CN401 Black & Antiflamin
g
85 01.40.CON.DCZ.E244 Connector Vertical VH Connector with four holes and
four
p
ins 1 CN406 White & Antiflaming
86 01.40.CON.DCZ.E129 Connector Vertical VH Connector with three holes and
two
p
in
s
1 CN400 White & Antiflaming
87 01.43.E011 Jack, Sharp, Fiber optic iuput jack with
shutte
r
GP1FAV51RK0F 2 JP405 JP404
88 01.40.CON.DCZ.E203 Jack, YuanChan
g
, SUB Tir
gg
er Jac
k
CKX-3.5-2
2
1 JP402
89 01.40.CON.DCZ.E865 Jack H-AV2-8.4-9PB-14 1 JP406
A
ntiflaming; The color of two
terminals is Oran
g
e.
90 01.40.CON.DCZ.E864 Jack H-AV8-8.4-13PB-54 1 JP403
A
ntiflaming; The color is
Orange, White, White&White
from left to right on top line
and Purple, Red, Red&Red
from left to right on bottom
line.
91 01.40.CON.DCZ.E181 Jack, YuanChan
g
, SCART Jac
k
CS-101 1 JP401 Full
y
Shield
92 01.57.R.R.E010 Thermal De
p
endent Resistor, JinK
e
JK-MSMD010 SMD 1 PTC400
93 01.40.CON.DCZ.E863 Jack, Hon
g
Chan
g
, FM Jac
k
IF-02P 1
A
NT401 nickel-
p
late
94 01.37.PCB.2.E5983C PCB board-AV Board without
com
p
onent
s
5983C 1 2-layers
HS2X0 Component List for AV Board (5983C)
harman/kardon
HS 2X0/230 Service Manual
Page 16 of 73

Item P/N Description Specification Qt
y
Location.No. Note
1 01.57.R.3.E000J Resistor, chi
p
0805-0Ω ±5
%
2 R504 R50
5
2 01.57.R.3.E100J Resistor, chi
p
0805-10Ω±5
%
1 R591
3 01.57.R.3.E220J Resistor, chi
p
0805-22Ω±5
%
1 R568
4 01.57.R.3.E330J Resistor, chi
p
0805-33Ω±5
%
2 R519 R58
9
5 01.57.R.3.E470J Resistor, chi
p
0805-47Ω±5
%
1 R569
6 01.57.R.3.E101J Resistor, chi
p
0805-100Ω±5
%
1 R517
7 01.57.R.3.E471J Resistor, chi
p
0805-470Ω±5
%
4 R525 R536 R553 R58
0
8 01.57.R.3.E102J Resistor, chip 0805-1KΩ±5% 9 R535 R538 R542 R544 R546 R551 R554
R555 R59
8
9 01.57.R.3.E202J Resistor, chi
p
0805-2KΩ±5
%
2 R541 R53
7
10 01.57.R.3.E302F Resistor, chi
p
0805-3KΩ±1
%
2 R531 R54
3
11 01.57.R.3.E362F Resistor, chi
p
0805-3.6KΩ±1
%
2 R533 R53
4
12 01.57.R.3.E472J Resistor, chi
p
0805-4.7KΩ±5
%
6 R540 R547 R552 R556 R560 R57
6
13 01.57.R.3.E103J Resistor, chip 0805-10KΩ±5% 8 R524 R549 R571 R577 R579 R587 R532
R590
14 01.57.R.3.E203J Resistor, chi
p
0805-20KΩ±5
%
3 R592 R593 R59
4
15 01.57.R.3.E393F Resistor, chi
p
0805-39KΩ±1
%
1 R545
16 01.57.R.3.E513J Resistor, chi
p
0805-51KΩ±5
%
1 R567
17 01.57.R.3.E204J Resistor, chi
p
0805-200KΩ±5
%
1 R566
18 01.57.R.4.E330J Resistor, chi
p
1206-33Ω±5
%
1 R522
19 01.57.R.4.E201J Resistor, chi
p
1206-200Ω±5
%
1 R526
20 01.57.R.4.E331F Resistor, chi
p
1206-330Ω±1
%
4 R583 R584 R585 R58
6
21 01.57.R.4.E102J Resistor, chi
p
1206-1KΩ±5
%
1 R539
22 01.57.R.4.E103J Resistor, chi
p
1206-10KΩ±5
%
2 R596 R59
7
23 01.57.R.4.E393J Resistor, chi
p
1206-39KΩ±5
%
2 R520 R51
4
24 01.57.R.4.E564J Resistor, chi
p
1206-560KΩ±5
%
2 R501 R50
2
25 01.57.R.4.E305J Resistor, chi
p
1206-3MΩ±5
%
4 R562 R563 R564 R56
5
26 01.57.R.4.E335J Resistor, chi
p
1206-3.3MΩ±5
%
2 R573 R57
4
27 01.57.R.C.ED102 FIXED CARBON FILM RT1/4W-1KΩ1 R570
28 01.57.R.C.EF683 FIXED CARBON FILM RT1W-68KΩ±5% 1 R530
29 01.57.R.C.EF104 FIXED CARBON FILM RT1W-100KΩ ±5% 1 R521
30 01.57.R.C.EG390 FIXED CARBON FILM RT2W-39Ω±5% 1 R548
31 01.57.R.C.EGR39 FIXED CARBON FILM RT2W-0.39Ω±5% 2 R572,R57
5
32 01.57.R.C.EH471 FIXED CARBON FILM RT3W-470Ω1 R595
33 01.57.R.Y.E10
K
Volta
g
e De
p
endent Resisto
r
10K.471 1 RZ503
34 01.57.R.R.E5D11 Thermmal De
p
endent Resisto
r
NTC-5D-11 1 RZ501
35 01.57.R.C.E60F11
6
Hi
g
h-Resistance Cermet Resistor RCR60-1W-11MΩ2 R558
36 01.57.R.R.EJK1630
0
Resettable Fuse, JinK
e
JK16 300 1 RZ502
37 01.54.CS.3.E331N50
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0805-330P NPO±5%/50
V
1 C533
38 01.54.CS.3.E102X50
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0805-102 X7R ±10%/50
V
1 C519
39 01.54.CS.3.E103X50
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0805-103 X7R±10%/50
V
1 C534
40 01.54.CS.3.E473X50
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0805-473 X7R±10%/50
V
1 C532
41 01.54.CS.3.E473X100
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0805-473 X7R±10%/100
V
2 C508,C51
0
42 01.54.CS.3.E104Y50V Capacitor, multilayer ceramic, chip 0805-104 Y5V+80-20%/50V 19
C517 C521 C522 C523 C524 C526 C527
C528 C529 C530 C537 C538 C539 C542
C543 C544 C545 C547 C548
43 01.54.CS.3.E224Y50
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0805-224 Y5V-20+80%/50
V
1 C516
44 01.54.CS.3.E474Y50
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0805-474 Y5V+80-20%/50
V
1 C535
45 01.54.CS.4.E105Y25
V
Ca
p
acitor, multila
y
er ceramic, chi
p
1206-105 Y5V+80-20%/25
V
1 C518
46 01.35.CC.E120610U16
V
Ca
p
acitor, multila
y
er ceramic, chi
p
ECJMFF1C106
Z
1 C536
47 01.00.CD.DL.E223100
V
Ter
y
lene Ca
p
acitor 223/100
V
1 C507
48 01.00.CD.DS.E10450
V
Radial Monolithic Ca
p
acitor 104/50V X7R±10%
(
lead
p
itch:5.08mm
)
1 C531
49 01.00.CD.JZ.E472630V
A
Metallized ca
p
acitor 472/630V
(
lead
p
itch: 10mm
)
1 C509
50 01.00.CD.JZ.E103630V
A
Metallized ca
p
acitor 103/630V
(
lead
p
itch: 10mm
)
2 C505 C51
5
51 01.00.CD.JZ.E105400
V
Metallized ca
p
acitor 105/400V
(
lead
p
itch: 15mm
)
1 C502
52 01.00.CD.GY.E8211K
V
Hi
g
h-volta
g
e metallized
p
ol
y
ester film 821,1KV
(
lead
p
itch: 15mm
)
1 C520
53 01.00.CD.GY.E224275
V
Hi
g
h-volta
g
e metallized
p
ol
y
ester film 224/275V X2
(
lead
p
itch: 15mm
)
2 CX502 CX50
3
54 01.00.CD.GY.E334275
V
Hi
g
h-volta
g
e metallized
p
ol
y
ester film 334/275V X2
(
lead
p
itch: 15mm
)
1 CX501
55 01.00.CD.GY.E102400V250V High-voltage metallized polyester film 102/400V(X1) 250V(Y1) (lead pitch: 10mm) 2 CY503 CY504
56 01.00.CD.GY.E471400V250V High-voltage metallized polyester film 471/400V (X1) 250V (Y1) (lead pitch:
10mm
)
2 CY501 CY502
57 01.34.CL.D.EH47U50V
D
Ca
p
acitor, AL.electrol
y
tic GF470M050E110
A
3 EC501 EC503 EC50
5
CAPXON
58 01.34.CL.D.EH470U16V
D
Ca
p
acitor, AL.electrol
y
tic GF471M016F115
A
2 EC513 EC51
4
CAPXON
59 01.34.CL.D.E470U25V Capacitor, AL.electrolytic 470UF/25V 8*20 ±20% 105℃ Low ESR 8EC524 EC511 EC525 EC516 EC526
EC521 EC515 EC51
2
CAPXON
60 01.34.CL.D.E1000U50V
H
Ca
p
acitor, AL.electrol
y
tic GF102M050I250
A
3 EC517 EC519 EC52
7
CAPXON
61 01.34.CL.D.E1500U50
V
Ca
p
acitor, AL.electrol
y
tic GF152M050J410
A
1 EC518 CAPXON
62 01.34.CL.D.E2882200U16VH Capacitor, AL.electrolytic CD288H-2200UF/16V 13*25 2 EC507 EC508 CAPXON GF222M016I250A
63 01.34.CL.D.E288220U10VH Capacitor, AL.electrolytic GF222M010G200A 3 EC522 EC506 EC520 CAPXON
GF222M010G200
A
64 01.34.CL.D.E28868U50 Capacitor, AL.electrolytic KM680M050E110A 1 EC528 CAPXON-KM680M050E110A
65 01.34.CL.D.E270U400VS Capacitor, AL.electrolytic HP271M400N510AP(270UF,400V,Φ25*51
,
±20%,10
5
℃,DIP
)
1 EC502 HP271M400N510AP
66 01.13.L.L.D.E192 Common Mode Inducto
r
LCL-303A DIP 2 LF502 LF501
67 01.13.L.L.D.E07
7
Pulse transforme
r
L0620-050 DI
P
2 L507 L50
2
68 01.13.L.L.D.E141 Filter inductor L-200A DIP 1 L508
69 01.13.L.L.D.E01
8
Common Mode Choke LCL-471 1 LF503
70 01.13.L.R.E172 Transformer BCK-ER2893
(
DIP
)
1 T502
71 01.13.L.R.E173 Switchin
g
Power Transforme
r
BCK-ER4204
(
DIP
)
1 T503
72 01.13.L.L.D.E051 Inductor , leaded fixed LH0608-22U
H
3 L504 L505 L50
6
73 01.13.L.Z.ED100
A
Bead, leaded fixed 100Ω
(
3.5*6.0*0.8
)
1 L511
74 01.13.L.Z.ED100 Bead, leaded fixed 100Ω
(
3.5*9*0.8-T
)
2 L509 L51
0
F10 RHW3.5*9*0.8-T
75 01.41.D.PS.ELL414
8
Diode LL4148 SMD 1 D520 0.5W
76 01.41.D.PS.EB540
C
Diode B540C SMD 1 D517
77 01.41.D.PD.EFR104 Diode FR104 DIP 4 D506 D505 D503 D51
2
78 01.41.D.PD.EHER208G Diode HER208G DIP 2 D508 D50
4
79 01.41.D.PD.EDQ06 Diode 21DQ06 DIP 1 D513
80 01.41.D.PD.E21DQ1
0
Diode 21DQ10 DIP 2 D514 D50
9
81 01.41.D.PD.EFCF16A40 Diode FCF16A40,400V,16A,TO-
220,1.25V,30uA,120A,45nS,DI
P
2 D516 D515
82 01.41.D.PD.E2010DN Diode FYPF2010DN DIP 1 D510
p
lastic enca
p
sulation
83 01.41.D.PD.EGBU806 Diode brid
g
e GBU806 DIP 1 BD501
84 01.41.D.WS.E18V Zener Diode 18
V
3 Z501 Z502 Z506
85 01.41.D.WS.EDDZ9707 Zener Diode DDZ9707-F
(
20V
)
SMD 2 Z503 Z504
86 01.42.Q.S.E8050 Transisto
r
KTC8050 SMD 1 Q510
87 01.42.Q.S.EC8550 Transisto
r
KTC8550 SMD 1 Q511
88 01.42.Q.S.ET3904 Transisto
r
MMBT3904 SMD 2 Q504 Q507 SOT23
89 01.42.Q.S.E2N390
6
Transisto
r
2N3906 SMD 1 Q505 SOT23
90 01.42.Q.S.E1037 Transisto
r
2SA1037AKR SMD 1 Q513
91 01.42.Q.S.E5866 Transisto
r
2SC5866 SMD 1 Q514 Rohm
92 01.44.IC.S.E4835 Mosfet
A
F4835 SMD 2 Q503 Q508
93 01.44.MOS.S.EDMN3033LSN Mosfet DMN3033LSN SM
D
1 Q506
94 01.44.MOS.D.EFQA13N80 Mosfet FQA13N80
(
TO-3PIN,DIP
)
1 Q509 Fairchild
95 01.44.IC.D.EFSDM0465REWDTU IC, Fairchild, Power Switch FSDM0465REWDTU, TO-220F 1 U503
p
lastic enca
p
sulation
96 01.44.IC.S.EA11173V
3
IC, AAC, LDO
A
Z1117H-3.3, SOT-223 1 U510
97 01.44.IC.D.E78R1
2
IC, Fairchild, Volta
g
e Re
g
ulator KA78R12, TO-220F-4
L
1 U514
p
lastic enca
p
sulation
98 01.44.IC.D.E278R05 IC, Fairchild or ShiBao, Voltage
Re
g
ulato
r
KA278R05CTU, TO-220F-4L 1 U511 plastic encapsulation
99 01.44.IC.D.E78R05CTU IC, Fairchild, Volta
g
e Re
g
ulator KA78R05TSTU, TO-220F-4
L
1 U508
100 01.44.IC.D.EKA7912 IC, Fairchild, Volta
g
e Re
g
ulator KA7912,TO-220 1 U513
101 01.44.IC.D.ELTV817 IC, LITEON, Photoelectric Cou
p
ler LTV817 DIP 4 U505 U504 U502 U51
5
102 01.44.IC.D.EKA431 IC, AAC, Shunt Re
g
ulato
r
KA431LZTA 0.5% DIP 2 U507 U50
9
103 01.44.IC.S.EFAN7602M
X
IC, Fairchild/ShiBao, PWM Controller FAN7602MX SM
D
1 U506
104 01.40.CON.DCZ.E129 Connector Vertical VH Connector with three holes and
two
p
in
s
2 CN501 CN506 White & Antiflaming
105 01.38.FUSE.D.E5AL250V3610 Fuse T5AL/250V(φ3.6*10 dual pins) , In Line
Packa
g
e1 F501
106 01.40.CON.S13.FPC2.E00
5
FPC Connecto
r
1.25-14P Vertical T
yp
e and Dual Conac
t
1 CN503 Black
107 01.40.CON.S13.FPC2.E00
3
FPC Connecto
r
1.25-12P Vertical T
yp
e and Dual Conac
t
1 CN504 Black
108 01.40.CON.S13.FPC2.E00
4
FPC Connecto
r
1.25-9P Vertical T
yp
e and Dual Conac
t
1 CN50
5
Black
109 01.00.WJ.QT.E041 3
p
ins
g
roundin
g
p
iec
e
M4 3 G501 G503 G502
110 01.00.DP.QT.E113 Sil-
p
ad sil-
p
ad 400-302
2
1 For Q509 on SMPS Board
111 01.37.PCB.2.E6144C PCB Board-SMPS Board without
com
p
onent
s
6144C 1 2-layers
HS2X0 Component List for SMPS Board (6144C)
harman/kardon
HS 2X0/230 Service Manual
Page 17 of 73

Item P/N Description Specification Qt
y
Location.No. Note
1 01.57.R.3.E000J Resistor, chi
p
0805-0Ω ±5
%
2
(
R657
)
(
R659
)
2 01.57.R.3.E1R0J Resistor, chi
p
0805-1Ω±5
%
2
(
FB604
)
(
FB605
)
3 01.57.R.3.E101J Resistor, chi
p
0805-100Ω±5
%
5
(
R606
)
(
R607
)
(
R638
)
(
R641
)
(
R652
)
4 01.57.R.3.E201J Resistor, chi
p
0805-200Ω±5
%
2
(
R614
)
(
R647
)
5 01.57.R.3.E471J Resistor, chi
p
0805-470Ω±5
%
1
(
R605
)
6 01.57.R.3.E511J Resistor, chi
p
0805-510Ω±5
%
3
(
R615
)
(
R648
)
(
R642
)
7 01.57.R.3.E202J Resistor, chi
p
0805-2KΩ±5
%
1
(
R608
)
8 01.57.R.3.E472J Resistor, chip 0805-4.7KΩ±5% 9 (R609) (R610) (R601) (R603) (R604)
(
R611
)
(
R612
)
(
R613
)
(
R655
)
9 01.57.R.3.E103J Resistor, chi
p
0805-10KΩ±5
%
1
(
R637
)
10 01.57.R.3.E153J Resistor, chi
p
0805-15KΩ±5
%
2
(
R602
)(
R653
)
11 01.57.R.3.E203J Resistor, chi
p
0805-20KΩ±5
%
2
(
R636
)(
R644
)
12 01.57.R.3.E104J Resistor, chi
p
0805-100KΩ±5
%
1
(
R639
)
13 01.57.R.3.E154J Resistor, chi
p
0805-150KΩ±5
%
1
(
R643
)
14 01.57.R.4.ER15J Resistor, chi
p
1206-0.15Ω±5
%
1
(
R640
)
15 01.57.R.Y.E270 Voltage Dependent Resistor, TDK AVR-M1608C270MTABB SMD 6 (ESD601) ESD602 ESD603 ESD605
ESD606 ESD60
4
16 01.54.CS.3.E220N50
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0805-22P NPO±5%/50
V
2
(
C604
)
(
C605
)
17 01.54.CS.3.E300N50
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0805-30P NPO±5%/50
V
1
(
C620
)
18 01.54.CS.3.E560N50
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0805-56P NPO±5%/50
V
2
(
C611
)
(
C612
)
19 01.54.CS.3.E123X50
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0805-123 X7R±10%/50
V
2
(
C624
)(
C636
)
20 01.54.CS.3.E473X50
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0805-473 X7R±10%/50
V
2
(
C618
)
(
C626
)
21 01.54.CS.3.E104Y50V Capacitor, multilayer ceramic, chip 0805-104 Y5V+80-20%/50V 10 (C634) (C606) (C607) (C608) (C627)
(
C628
)
(
C629
)
(
C630
)
(
C633
)
(
C635
)
22 01.54.CS.3.E225X25
V
Ca
p
acitor, multila
y
er ceramic, chi
p
0805-225 X7R±20%/25
V
2
(
C603
)
(
C619
)
YAGEO
23 01.54.CS.4.E105X50
V
Ca
p
acitor, multila
y
er ceramic, chi
p
1206-105 X7R±10%/50
V
2
(
C637
)
(
C638
)
24 01.34.CL.D.E10U16V
B
Ca
p
acitor, AL.electrol
y
tic CD11X-10UF/16V 4*
7
2 EC616 EC61
7
25 01.34.CL.D.E47U16V
B
Ca
p
acitor, AL.electrol
y
tic CD11X-47UF/16V 5*
7
2 EC603 EC601
26 01.34.CL.D.E47U50VC
D
Ca
p
acitor, AL.electrol
y
tic CD110-47UF/50V 6.3*1
2
2 EC605 EC61
4
27 01.34.CL.D.EH47U50V
D
Ca
p
acitor, AL.electrol
y
tic GF470M050E110
A
1 CE607
28 01.34.CL.D.EX100U16V
B
Ca
p
acitor, AL.electrol
y
tic CD11X-100UF/16V 6.3*
7
2 EC602 CE61
5
29 01.34.CL.D.E220U6V3
B
Ca
p
acitor, AL.electrol
y
tic CD11X-220UF/6.3V 6.3*
7
1 EC621
30 01.34.CL.D.E288330U16V
D
Ca
p
acitor, AL.electrol
y
tic CD288H-330UF/16V 8*1
2
2 EC620 EC60
4
31 01.38.FUSE.S.EJK110 Pol
y
er Positive Tem
p
erature Coefficent JK-110
(
1.1A
)
SMD 1 PTC601
32 01.13.L.Z.ESB50 Bead, chi
p
0805-50
Ω
3
(
FB601
)
(
FB602
)
(
FB603
)
33 01.00.JZ.E04000 Quart
y
z Cr
y
stal Unit 4.000MHZ-49S-22
P
1 Y601
34 020302000000
3
Transformer SPT-EE1316V,EE13,DIP 1 TR3
35 01.41.D.PS.ELL414
8
Diode LL4148 SMD 4
(
D601
)(
D602
)
(
D603
)
(
D605
)
36 01.41.D.PD.EFR104 Diode FR104 DIP 2 D606 D60
8
37 01.41.D.FD.E1L0392
A
LED 1L0392A2W32CM001 DI
P
2 LED601 LED60
2
Hi
g
h li
g
ht, white and amber
38 01.42.Q.S.EC8550 Transisto
r
KTC8550 SMD 1
(
Q603
)
SOT23
39 01.42.Q.S.E8050 Transisto
r
KTC8050 SMD 1
(
Q602
)
SOT23
40 01.41.D.WS.E6V2 Zener Diode 6.2
V
1 DZ601 DZ601
41 01.44.IC.S.E75711 IC, SANYO, VFD Driver LC75711NE,QFP64
E
1
(
U604
)
42 01.46.IC.E78P156G IC, ELAN, MCU EM78P156ELM-G SMD 1 U601 firmware burn-in
43 01.44.IC.D.ENCP3063BPG IC, ONSEMI, 1.5 A, Step-
U
p
/Down/Invertin
g
Switchin
g
Re
g
ulator
s
NCP3063BPG DIP 1 (U605)
44 01.44.IC.D.E38B17 IC, IR receiver HL38B17 DIP 1 IR601
45 01.40.CON.S10.FPC2.E03
0
FPC Connecto
r
1.0-14P, Vertical T
yp
e and Dual Conac
t
1 CN601 Black
46 01.40.CON.S13.FPC2.E00
5
FPC Connecto
r
1.25-14P, Vertical T
yp
e and Dual Conac
t
1 CN602 Black
47 01.40.CON.S10.FPC2.E00
2
FPC Connecto
r
1.0-8P, Vertical T
yp
e and Dual Conac
t
1 CN603 Black & Antiflamin
g
48 01.40.CON.S10.FPC2.E00
4
FPC Connecto
r
1.0-6P, Vertical T
yp
e and Dual Conac
t
1 CN604 Black & Antiflamin
g
49 01.39.SW.QC.EDKFC Touch switch KFC-A06-05（Vertical T
yp
e）DIP 2 K602 K601
50 01.40.CON.DCZ.E21
9
Ear
p
hone Jac
k
CKX-3.5-1
2
1 J602
51 01.40.CON.DCZ.E217 USB Jac
k
USB-A-05
(
ROHS, Mother Set
)
1 J601
52 01.16.E1303F VFD VFD22-1303F 1 VFD601
53 0226010000074 PCB Board-Front Panel Board without
com
p
onent
s
6742C 1
Item P/N Description Specification Qt
y
Location.No. Note
1 01.57.R.3.E472J Resistor, chi
p
0805-4.7KΩ±5
%
3
(
R617
)
(
R618
)
(
R616
)
2 01.57.R.3.E181J Resistor, chi
p
0805-180Ω±5
%
4
(
R622
)
(
R623
)
(
R624
)
(
R625
)
3 01.54.CS.3.E821N50V Ca
p
acitor, multila
y
er ceramic, chi
p
0805-820P NPO±5%/50
V
2
(
C601
)
(
C602
)
4 01.54.CS.3.E104Y50V Ca
p
acitor, multila
y
er ceramic, chi
p
0805-104 Y5V+80-20%/50
V
1
(
C614
)
5 01.42.Q.S.ET3904 Transisto
r
MMBT3904, SOT23 1
(
Q601
)
6 01.42.Q.S.EC8550 Transisto
r
KTC8550, SOT23 2
(
Q604
)
(
Q605
)
7 01.41.D.FD.E1L0545W31B0CC201 LED 1L0545W31B0CC201 Ф5(white) DIP 4 LED603 LED604 LED605 LED606 High light white and
asti
g
matism
8 01.40.CON.S10.FPC2.E036 FPC Connector 1.0-6P Horizontal Type and Dual Conact 1 CN605 Positive Pointer
9 01.36.VR.E20K Volume encoder, Pulse ED1612-24-24-HC-F20
(
2
)
1 W601
10 0226010000075 PCB board-Volume Button Board without
com
p
onent
s
6743C 1 2-layers
HS2X0 Component List for Front panel board (6742C)
HS2X0 Component List for Volume Button board (6743C)
harman/kardon
HS 2X0/230 Service Manual
Page 18 of 73

AML8218 A/V Processor User Guide Ver sion 0.7
1/4/09 35 /36 AMLOGIC Proprietary
7. Pin-Out Diagram
NC
NC
NC
NC
SD_D3
SD_D2
SD_D1
SD_D0
VDD33
SD_CLK
SD_CMD
GPIOC_14
DVSS
GPIOC_13
GPIOC_12
GPIOC_11
GPIOC_10
GPIOC_9
GPIOC_8
GPIOC_7
GPIOC_6
GPIOC_5
GPIOC_4
DVSS
VDD33
I2C_M_CLK
I2C_M_DATA
SPDIF_OUT
REMOTE
VDD12
RESET_N
OSCOUT
OSCIN
PLLA_AVSS33
PLLA_AVDD33
PLLB_AVSS33
PLLB_AVDD33
PLLC_AVSS33
PLLC_AVDD33
USBA_vdd33
USBA_test_xi
USBA_vss33c
USBA_test_xo
USBA_txrtune
USBA_vss33
USBA_dm
USBA_dp
USBA_vdd33
USBA_vbus
USBA_id
NC
NC
NC
NC
VDAC-DAC_B JTAG_TDO JTAG_TCK JTAG_TDI JTAG_TMS GPIO_D1 GPIO_D0 LED_0 VDD33 M2_A_3 M2_A_2 DVSS M2_A_1 M2_A_0 M2_A_10 M2_BA1 M2_BA0 M2_SCS0_n M2_RAS_n M2_CAS_n VDD12 VDD12 M2_WE_n M2_A_4 M2_A_5 M2_A_6 M2_A_7 VDD33 M2_A_8 M2_A_9 VSS33 M2_A_11 M2_A_12 M2_CLK0 M2_DQM0 M2_DQM1 M2_D_8 M2_D_9 M2_D_10 M2_D_11 M2_D_12 M2_D_13 M2_D_14 M2_D_15 VDD33 M2_D_7 M2_D_6 M2_D_5 DVSS M2_D_4 M2_D_3 M2_D_2 M2_D_1 M2_D_0
55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
AML 8218
216 Pin LQFP
VDD12
M1_D_13 M1_D_12 M1_D_11 M1_D_10
M1_D_9 M1_D_8
M1_DQM1
DVSS
VDD33 VDD33
M1_CLK0
M1_A_12 M1_A_11
M1_A_9 M1_A_8 M1_A_7 M1_A_6
VDD12
M1_A_5 M1_A_4
VDD33
M1_WE_n
M1_CAS_n M1_RAS_n
M1_SCS0_n
M1_BA0
DVSS DVSS
M1_BA1
M1_A_10
M1_A_0
VDD33
M1_A_1 M1_A_2 M1_A_3
RMII_TX_DATA0 RMII_TX_DATA1
RMII_RX_ERR
RMII_RX_CRS_DV
RMII_TX_EN RMII_RX_D0 RMII_RX_D1
RMII_CLK50
DVSS
RMII_MDIO
RMII_MDC
VDD33
SDIO_CLK
SDIO_CMD
SDIO_D0 SDIO_D1 SDIO_D2 SDIO_D3
162
161
160
159
158
157
156
155
154
153
152
151
150
149
148
147
146
145
144
143
142
141
140
139
138
137
136
135
134
133
132
131
130
129
128
127
126
125
124
123
122
121
120
119
118
117
116
115
114
113
112
111
110
109
216 215 214 213 212 211 210 209 208 207 206 205 204 203 202 201 200 199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181 180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163
VDAC-AVD33B
VDAC-DAC_G
VDAC-AVD33
VDAC-AVS33B
VDAC-AVS33G
VDAC-AVS33R
VDAC-DAC_R
VDAC-AVD33R
VDAC-COMP
VDAC-REXT
VDAC-VREFIN
VDAC-AVDD
VDAC-AVSS
AFLR-AVSS
AFLR_L
AFLR_R
AFLR-AVDD
DVSS
GPIOA_0
GPIOA_1
GPIOA_2
GPIOA_3
GPIOA_4
VDD33
GPIOA_5
GPIOA_6
GPIOA_7
GPIOA_8
VDD12
DVSS
GPIOA_9
GPIOA_10
GPIOA_11
GPIOA_12
GPIOA_13
NAND_WE_n
NAND_RDY_BSY
NAND_CE_n
SPI_CS_n
SPI_HOLD_n
VDD33
M1_D_0 / SPI_C
M1_D_1 / SPI_D
M1_D_2 / SPI_Q
M1_D_3 / SPI_A
DVSS
M1_D_4
M1_D_5
M1_D_6
M1_D_7
VDD33
M1_DQM0
M1_D_15
M1_D_14
harman/kardon
HS 2X0/230 Service Manual
Page 19 of 73

FLI2310 LF Digital Video Converter Data Sheet
C0702-DAT-15B - 9 - November 2004
*** Genesis Microchip Confidential ***
PRELIMINARY INFORMATION -- SUBJECT TO CHANGE
3 PIN INFORMATION
3.1 Pin Diagram
Figure 3.1: Pinout Information
1 5 5
1 5 0
1 4 5
1 4 0
1 3 5
1 3 0
1 2 5
1 2 0
1 1 5
1 1 0
1 0 5
1
5
1 0
1 5
2 0
2 5
3 0
3 5
4 0
4 5
5 0
5 5
6 5
6 0
1 0 0 9 5 9 0 8 5
8 0
7 5
7 0
2 0 5 1 9 5 2 0 0
1 6 0
1 6 5
1 7 0
1 7 5
1 8 0
1 8 5 1 9 0
HSYNC1_PORT1
VDD1
B/Cb/D1_0
VSS
IN_CLK1_PORT1
FIELD ID1_PORT1
VSYNC1_PORT1
HSYNC2_PORT1
IN_CLK2_PORT1
FIELD ID2_PORT1
VSYNC2_PORT1
B/Cb/D1_6
B/Cb/D1_5
B/Cb/D1_4
B/Cb/D1_3
B/Cb/D1_2
B/Cb/D1_1
B/Cb/D1_7
VDDcore1
VSScore
R/Cr/Cb Cr_0
R/Cr/Cb Cr_6
R/Cr/Cb Cr_5
R/Cr/Cb Cr_4
R/Cr/Cb Cr_3
R/Cr/Cb Cr_2
R/Cr/Cb Cr_1
R/Cr/Cb Cr_7
VDD2
VSS
G/Y/Y_0
G/Y/Y_1
G/Y/Y_6
G/Y/Y_5
G/Y/Y_4
G/Y/Y_3
G/Y/Y_2
G/Y/Y_7
VDDcore2
VSScore
IN_SEL
TEST
DEV_ADDR1
DEV_ADDR0
SCLK
SDATA
RESET_N
VDD3
VSS
SDRAM DATA(0)
SDRAM DATA(2)
SDRAM DATA(1)
SDRAM DATA(3)
SDRAM DATA(10)
SDRAM DATA(9)
SDRAM DATA(8) SDRAM DATA(7) SDRAM DATA(6)
SDRAM DATA(5) SDRAM DATA(4)
SDRAM DATA(17) SDRAM DATA(16)
SDRAM DATA(15)
SDRAM DATA(14) SDRAM DATA(12) SDRAM DATA(13)
SDRAM DATA(11)
VDD4
VSS
VDDcore3
VSScore
SDRAM DATA(20) SDRAM DATA(19)
SDRAM DATA(18)
SDRAM DATA(31)
SDRAM DATA(30) SDRAM DATA(29)
SDRAM DATA(28) SDRAM DATA(26) SDRAM DATA(27) SDRAM DATA(25)
SDRAM DATA(24)
SDRAM DATA(23)
SDRAM DATA(21)
SDRAM DATA(22)
VDDcore4
VSScore
VSS
VDD5
TEST IN
SDRAM ADDR(10)
SDRAM ADDR(5) SDRAM ADDR(4) SDRAM ADDR(3)
SDRAM ADDR(6)
SDRAM ADDR(7) SDRAM ADDR(8) SDRAM ADDR(9)
VDDcore5
VSScore
SDRAM ADDR(0) SDRAM ADDR(1) SDRAM ADDR(2)
SDRAM WEN
B/U/Pb_OUT_7
VDDcore7
VSScore
R/V/Pr_OUT_7
VDD8
VSS
G/Y/Y_OUT_7
G/Y/Y_OUT_1
G/Y/Y_OUT_2
G/Y/Y_OUT_3
G/Y/Y_OUT_4
G/Y/Y_OUT_5
G/Y/Y_OUT_6
G/Y/Y_OUT_0
R/V/Pr_OUT_0
R/V/Pr_OUT_1
R/V/Pr_OUT_2
R/V/Pr_OUT_3
R/V/Pr_OUT_4
R/V/Pr_OUT_5
R/V/Pr_OUT_6
B/U/Pb_OUT_0
B/U/Pb_OUT_1
B/U/Pb_OUT_2
B/U/Pb_OUT_3
B/U/Pb_OUT_4
B/U/Pb_OUT_5
B/U/Pb_OUT_6
VSS
VDD7
CLKOUT
VSScore
VDDcore6
TEST OUT1
CTLOUT4
CTLOUT0
CTLOUT1
CTLOUT2
CTLOUT3
TEST OUT0
TEST3
SDRAM CLKIN
SDRAM CLKOUT
VSS
VDD6
SDRAM DQM
SDRAM CASN
SDRAM BA1
SDRAM BA0
SDRAM CSN
SDRAM RASN
OE
PLL_PVDD
PLL_PVSS AVSS_PLL_BE1
AVDD_PLL_BE1
AVSS_PLL_SDI
AVSS_PLL_FE
AVSS_PLL_BE2
AVDD_PLL_FE
AVDD_PLL_SDI
AVDD_PLL_BE2
R_VSS
R_VDD1.8
R_VSS
Reserved
Reserved
Reserved
R_VDD
R_VDD
R_VDD
R_VSS R_VSS R_VSS
Reserved
Reserved
Reserved
R_VSS
R_VDD
R_VSS
R_VSS
R_VDD
R_VDD
TEST0 TEST1 TEST2
XTAL IN XTAL OUT VDD9 VSS
HSYNC_PORT2 IN_CLK_PORT2
FIELD ID_PORT2
VSYNC_PORT2
VSScore
VDDcore8
D1_IN_0 D1_IN_7 D1_IN_6 D1_IN_5 D1_IN_4 D1_IN_3 D1_IN_2 D1_IN_1
Package: 208-pin PQFP
harman/kardon
HS 2X0/230 Service Manual
Page 20 of 73