Harman Kardon HTFS 3/E User manual

HTFS 3/E
Speaker stands
Designed to Entertain.
™
User Guide
0166CSK - HK HTFS 3 E.indd 1 08/10/09 10:23:20

Note: HTFS 3/E stands are for use with
HKTS 20, HKTS 30, HKTS 60 and HKTS 200
satellite speakers (not included)
Speaker stands
ASSEMBLY INSTRUCTIONS
ASSEMBLY
End of rail
with cutout Press adapter
into rail
Bring
wire out
Feed
through
hole
Wire
(included with speakers)
Oval-head
screw
Flat-head
screw
Included
Flat-head
screws
Oval-head
screws
Stand bases
Stand rails
Speaker adapters
Push UP
on corners
Push base
off speaker
HKTS 20 / HKTS 30 / HKTS 60 / HKTS 200 Speakers
1. Attach a stand rail to a stand base 2. Attach a speaker adapter to the stand rail
4. Remove the speaker’s base
3. Run the speaker wire
through the stand base
HTFS 3/E
0166CSK - HK HTFS 3 E.indd 2 08/10/09 10:23:25

+–
A. Push cap down B. Insert bare wire C. Release cap
Slide speaker
onto stand rail
Bring wire out
through notch
Fit
speaker rails
onto grooves
in stand rail
Features, specifications and appearance are subject to change without notice.
Harman Kardon is a trademark of Harman International Industries,
Incorporated, registered in the United States and/or other countries. Designed
to Entertain is a trademark of Harman International Industries, Incorporated.
©2009 Harman International Industries, Incorporated. All rights reserved.
HKTS 20 / HKTS 30 / HKTS 60 / HKTS 200 Speakers
5. Connect the speaker wire to the speaker
6. Attach the speaker to the stand rail 7. Bring the speaker wire out of the base
ENGLISH
0166CSK - HK HTFS 3 E.indd 3 08/10/09 10:23:26

Harman Consumer Group, Inc.
8500 Balboa Boulevard, Northridge, CA 91329 USA
516.255.4545 (USA only)
www.harmankardon.com
© 2009 Harman International Industries,
Incorporated.
All rights reserved.Tous droits réservés.
Part No. 444020-001, 444021-001
0166CSK - HK HTFS 3 E.indd 4 08/10/09 10:23:27