Harman Kardon AVR 171/230 User manual

Harman Kardon Service Manual
AVR 171/230
7.2 CHANNEL 100 Watt per channel A/V RECEIVER
Released EU2013 Harman Consumer Group, Inc. Rev .1,03/2016
8500 Balboa Boulevard
Northridge, California 91329
CONTENTS
EXPLODED VIEW AND PARTS 14
PARTS LIST 15
BIAS ADJUSTMENT 49
SEMICONDUCTOR PINOUTS 50
PCB DRAWINGS 149
BLOCK DIAGRAMS 159
WIRING DIAGRAM 161
SCHEMATIC DIAGRAMS 162
FRONT PANEL CONTROLS 3
REAR PANEL CONNECTORS 5
REMOTE CONTROL FUNCTIONS 7
PROCESSOR RESET 9
TROUBLESHOOTING 10
SPECIFICATIONS 11
PACKAGE DRAWING 12
DISASSEMBLY 13

®
Audio/video receiver
AVR 1710,AVR 171,AVR 171/230C
AVR 1610,AVR 161,AVR 161/230C
Owner’s Manual
Harman Kardon
AVR 171 Service Manual
Page 2 of 174

AVR Front-Panel Controls
Front-Panel Controls
Power
Indicator
Front-Panel
Display
Volume
Knob
Set
Button
IR
Sensor
Power
Button
Left/Right
Buttons
Headphone Jack/
EzSet/EQ
Mic Input
Audio Input
Button
Surround Modes
Select Buttons
Surround Mode
Category Button
Up/Down Buttons/
Tuning Buttons
USB
Port
Tuning Mode Button (AVR
1710/AVR 1610)/
RDS Button (AVR 171/
AVR 161)
Channel Volume
Adjust Button
Source Select
Buttons
4
Harman Kardon
AVR 171 Service Manual
Page 3 of 174

English
AVR Front-Panel Controls
Front-Panel Controls, continued
Power indicator/Power button: The AVR has three different power modes:
Off (Power indicator glows solid amber):The Off mode minimizes energy consumption•
when you’re not using the AVR. When the AVR is off, it will not automatically turn on
or play audio in response to an AirPlay stream from a networked device (AVR 1710/
AVR 171 only). When the AVR is off, pressing the Power button turns it on. To turn
the AVR off when it is on, press the Power button for more than three seconds. The
Front-Panel Display will indicate “Your device is switched off” for two seconds, then
will switch off.
NOTE: You can use the System Setup menu to set the AVR to automatically enter
the off mode after it has been in the Sleep mode for a certain period of time. See
System Settings, on page 34.
Sleep• (Power indicator glows solid amber and front-panel display indicates “Device
sleep”): The Sleep mode powers-down some of the AVR’s circuitry, but allows the
AVR to automatically turn on and play audio in response to an AirPlay or DLNA
DMR stream from a networked device (AVR 1710/AVR 171 only). When the AVR is
in Sleep, pressing the Power button turns it on. To put the AVR into Sleep when it is
on, press the Power button for less than three seconds. The front-panel display will
indicate “Device sleep” while the AVR is in the Sleep mode.
NOTE: The AVR will automatically enter the Sleep mode after 30 minutes of no audio
signal or user control input , unless USB, iPod, Home Network, vTuner, AirPlay, or
DLNA DMR is active. In these cases, the AVR will automatically enter the Sleep mode
after the number of hours set in the Auto Power Off system setting. See System
Settings, on page 34.
On• (Power indicator glows solid white): When the AVR is on it is fully operational.
Headphone jack/EzSet/EQ Mic input: Connect a 1/4” stereo headphone plug to this
jack for private listening. This jack is also used to connect the supplied microphone for
the EzSet/EQ setup procedure described in Configure the AVR For Your Speakers, on
page 22.
Tuning Mode button (AVR 1710/AVR 1610 only): Press this button to toggle the radio
between the manual (one frequency step at a time) and automatic (seeks frequencies
with acceptable signal strength) FM tuning mode. The button also toggles the radio
between stereo and mono modes when an FM station is tuned in.
RDS button (AVR 171/AVR 161 only): When listening to an FM radio station that
broadcasts RDS information, this button activates the various RDS functions.
USB port: The USB port can be used to play audio files from an Apple iOS®device
connected to the port, and can also be used to play MP3 and WMA audio files from a USB
device inserted into the port. Insert the connector or device into the USB port oriented so
it fits all the way into the port. You may insert or remove the connector or device at any
time – there is no installation or ejection procedure.
You can also use the USB port to perform firmware upgrades. If an upgrade for the AVR’s
operating system is released in the future, you will be able to download it to the AVR
using this port. Complete instructions will be provided at that time.
IMPORTANT: Do not connect a PC or other USB host/controller to this port, or you
may damage both the AVR and the other device.
Channel Volume Adjust button: Press this button to activate the individual channel
level adjustment. After pressing this button, use the Up/Down buttons/Tuning buttons to
select the channel for adjustment and use theLeft/Right buttons to adjust the channel’s
level.
Audio Input button: Press this button to change the audio input connection for the current
source. Use the Left/Right buttons to cycle through the available input connections, and
press the Set button to assign the currently-displayed connection to the source.
IR sensor: This sensor receives infrared (IR) commands from the remote control. Make
sure that the sensor is not blocked.
Set button: Press this button to select the currently highlighted menu item.
Left/Right buttons: Use these buttons to navigate the AVR’s menus.
Front-panel display: Various messages appear on this two-line display in response to
commands and changes in the incoming signal. In normal operation, the current source
name appears on the upper line, while the active surround mode is displayed on the
lower line. When the on-screen display menu system (OSD) is in use, the current menu
settings appear.
Up/Down buttons/Tuning buttons: Use these buttons to navigate the AVR’s menus.
When the radio is the active source, use these buttons to tune stations according to the
setting of the Tuning Mode button (see above).
Surround Mode Category button: Press this button to select a surround-sound
category. Each press changes the surround-mode category: Auto Select, Virtual, Stereo,
HARMAN NSP, Movie, Music and Video Game. To change the specific surround-sound
mode within the category, use the Surround Mode Select buttons. See Audio Processing
and Surround Sound, on page 29, for more information about surround modes.
Surround Mode Select buttons: After you have selected the desired surround-mode
category, press these buttons to select a specific mode within the category, such as to
change from Dolby®Pro Logic®II Movie mode to DTS®NEO:6 Cinema mode. Surround
mode availability depends on the nature of the source input signal, i.e., digital versus
analog, and the number of channels encoded within the signal.
Source Select buttons: Press these buttons to select the active source.
Volume knob: Turn this knob to raise or lower the volume.
5
Harman Kardon
AVR 171 Service Manual
Page 4 of 174

AVR Rear-Panel Connectors
6
Rear-Panel Connectors
HDMI/MHL Input
Connector
HDMI Input
Connectors
Power Cord
(AVR 1710)
HDMI Output
Connectors
Analog Video
Connectors
AVR 1710/AVR 171
Subwoofer
Pre-Out
Connectors
Radio Antenna
Connectors
Digital Audio
Connectors Fan Vents
Speaker
Connectors
Network
Connector
AC Input
Connector (AVR 171)
IR and Trigger
Connectors
Analog Audio
Connectors
HDMI/MHL Input
Connector
HDMI Input
Connectors
Power Cord
(AVR 1610)
HDMI Output
Connector
Analog Video
Connectors
AVR 1610/AVR 161
Subwoofer
Pre-Out
Connector
Radio Antenna
Connectors
Digital Audio
Connectors
Speaker
Connectors
Network
Connector
AC Input
Connector
(AVR 161)
IR and Trigger
Connectors
Analog Audio
Connectors
Harman Kardon
AVR 171 Service Manual
Page 5 of 174

English
AVR Rear-Panel Connectors
7
Rear-Panel Connectors, continued
Digital Audio connectors: If your non-HDMI source devices have digital outputs,
connect them to the AVR’s digital audio connectors. NOTE: Make only one type of digital
connection (HDMI, optical or coaxial) from each device. See Connect Your Audio and Video
Source Devices, on page 16, for more information.
Radio Antenna connectors: Connect the supplied AM and FM antennas to their
respective terminals for radio reception.
Analog Audio connectors: The following analog audio connectors are provided:
Analog Audio Input connectors:• Use the AVR’s Analog Audio Input connectors for
source devices that don’t have HDMI or digital audio connectors. See Connect Your
Audio and Video Source Devices, on page 16, for more information.
Zone 2 Out connectors (AVR 1710/AVR 171 only):• Connect these jacks to an
external amplifier to power the speakers in the remote zone of a multizone system.
Network connector: If your home network is wired, use a Cat. 5 or Cat. 5E Ethernet
cable (not supplied) to connect the AVR’s Network connector to your home network to
enjoy Internet radio and content from DLNA-compatible devices that are connected to the
network. See Connect to Your Home Network, on page 18, for more information.
Subwoofer Pre-Out connector: Connect this jack to a powered subwoofer with a line-
level input. See Connect Your Subwoofer, on page 15, for more information. NOTE: The
AVR 1710 and AVR 171 have two subwoofer connectors.
HDMI Output connectors: If your TV has an HDMI connector and you are connecting
HDMI source devices to the AVR, use an HDMI cable (not included) to connect it to
the AVR’s HDMI Out connector. NOTE: The AVR 1710 and AVR 171 have two HDMI Out
connectors.
Notes on using the HDMI Output connector:
When connecting a DVI-equipped display to the HDMI Out connector, use an•
HDMI-to-DVI adapter and make a separate audio connection.
Make sure the HDMI-equipped display is HDCP (High-bandwidth Digital Content•
Protection)-compliant. If it isn’t, do not connect it via an HDMI connection; use an
analog video connection instead and make a separate audio connection.
AVR 1710/AVR 171 only: If you have connected a 3D-capable TV to HDMI Out 1•
and a 2D-capable TV to HDMI Out 2, the AVR will not allow 3D playback when
both TVs are powered on. To watch 3D content, turn off the AVR and both TVs,
then first turn on the 3D TV, then turn on the AVR, and finally turn on the 3D
source device. Do NOT turn the 2D TV back on.
HDMI/MHL Input connector: If you have a Roku Streaming Stick or other MHL-capable
device, connect it only to this HDMI/MHL In connector. If you do not have an MHL device
you can use this connector for an HDMI-capable device.
Speaker connectors: Use two-conductor speaker wire to connect each set of terminals
to the correct speaker. See Connect Your Speakers, on page 14, for more information.
NOTE: The Assigned Amp speaker connectors (AVR 1710/AVR 171 only) are used
for the surround back or Front Height channels in a 7.1- channel home theater, or
you can reassign them to a remote room for multizone operation or to front height
channels for Dolby®Pro Logic IIz operation. See Place Your Speakers, on page 11,
for more information.
Analog Video connectors: The following Analog Video connectors are provided:
Composite Video Input connectors:• Use composite video connectors for video
source devices that don’t have HDMI connectors. You will also need to make an
audio connection from the source device to the AVR. See Connect Your Audio and
Video Source Devices, on page 16, for more information.
Composite Video Monitor Out connector:• If your TV or video display does not
have an HDMI connector, or if your TV does have an HDMI connector but you are
connecting some source devices with only composite video connectors, use a
composite video cable (not included) to connect the AVR’s Composite Video Monitor
Out connector to your TV ’s composite video input.
HDMI®Input connectors: An HDMI connection transmits digital audio and video signals
between devices. If your source devices have HDMI connectors, using them will provide
the best possible video and audio performance quality. Since the HDMI cable carries
both digital video and digital audio signals, you do not have to make any additional audio
connections for devices you connect via the HDMI connection. See Connect Your Audio
and Video Source Devices, on page 16, for more information.
IR and Trigger connector: The following IR and trigger connectors are provided:
IR In connectors:• When the IR sensor on the front panel is blocked (such as when
the AVR is installed inside a cabinet), connect an optional IR receiver to the IR In
jack.
12V Trigger connector:• This connector provides 12V DC whenever the AVR is on. It
can be used to turn on and off other devices such as a powered subwoofer.
Zone 2 IR Input connector (AVR 1710/AVR 171 only):• Connect a remote IR
receiver located in Zone 2 of a multizone system to this jack to control the AVR from
the remote zone.
Fan Vents (AVR 1710/AVR 171 only): These vents are used by the AVR’s fan to cool the
system. Maintain a clearance of at least three inches (75mm) from the nearest surface to
avoid overheating the unit. It is normal for the fan to remain off at most normal volume
levels. An automatic temperature sensor turns the fan on only when it is needed.
IMPORTANT NOTE: Never block the fan vents. Doing so could allow the AVR to
overheat to dangerous levels.
AC Input connector (AVR 171/AVR 161 only): After you have made and verified all
other connections, plug the supplied AC power cord into this receptacle and into an
unswitched wall outlet.
Power cord (AVR 1710/AVR 1610 only): After you have made and verified all other
connections, plug the power cord into an unswitched wall outlet.
Harman Kardon
AVR 171 Service Manual
Page 6 of 174

AVR System Remote Control Functions
8
System Remote Control Functions
Source Selector Buttons
Power Off Button
Power On Button
Back/Exit Button
Volume Up/Down Buttons
Mute Button
Zone 2 Button
(AVR 1710/AVR 171 only)
Home Button
AVR Button
OK Button
Clear Button
Delay Button
IR Transmitter
Surround Modes Button
Number Buttons
Test Tone Button
OSD/Menu Button
Sleep Button
Display Dimmer Button
Memory Button
RDS Button
Previous Channel Button
Transport Control Buttons
Info/Option Button
Direct Button
Preset Scan Button
Channel/Tuner Buttons
Up/Down/Left/Right
Buttons
Harman Kardon
AVR 171 Service Manual
Page 7 of 174

9
English
AVR System Remote Control Functions
9
System Remote Control Functions, continued
In addition to controlling the AVR, the AVR remote is capable of controlling eight other
devices, including an iPod/iPhone device connected to the AVR’s front-panel USB port.
During the installation process, you may program the codes for each of your source
components into the remote. (See Program the Remote to Control Your Source Devices
and TV, on page 21, for programming information.) To operate a component, press its
Source Selector button to change the remote’s control mode.
A button’s function depends on which component is being controlled. See Table A13 in
the Appendix for listings of the functions for each type of component. Most of the buttons
on the remote have dedicated functions, although the precise codes transmitted vary
depending on the specific device being controlled. Due to the wide variety of functions for
various source devices, we have included only a few of the most-often used functions on
the remote: number buttons, transport controls, television-channel control, menu access
and power on and off. Buttons dedicated to the AVR – AVR Power On/Off, Surround
Modes, Volume, Mute, Delay and Sleep Settings – are available at any time, even when
the remote is controlling another device.
Power On/Power Off buttons: Press these buttons to turn the AVR on and put it into
Sleep or turn it off. See Power Indicator/Power Button, on page 4, for more information.
IR Transmitter: As buttons are pressed on the remote, infrared codes are emitted
through this lens.
Zone 2 button (AVR 1710/AVR 171 only): Use this button to select whether the AVR
commands will affect the main listening area (Zone 1) or the remote zone of a multizone
system (Zone 2). When the remote is in the Zone 2 control mode, the Zone 2 button will
illuminate whenever you press a button.
Mute button: Press this button to mute the AVR’s speaker-output connectors and
headphone jack. To restore the sound, press this button or adjust the volume.
Source Selector buttons: Press one of these buttons to select a source device, e.g.,
Disc, Cable/Sat, Radio, etc. This action will also turn on the AVR and switch the remote’s
control mode to operate the selected source device.
The first press of the Radio button switches the AVR to the last-used tuner band (AM•
or FM). Each successive press changes the band.
The first press of the USB button switches the AVR to the last-used source (USB or•
iPod). Each successive press cycles between the two sources.
The first press of the Network button switches the AVR to the last-used source•
(Network or vTuner). Each successive press cycles between the two sources.
AVR button: Press to put the remote into the AVR control mode.
Surround Modes button: Press this button to access the Surround Modes submenu.
Select a surround-mode category: Auto Select, Virtual Surround, Stereo, HARMAN NSP,
Movie, Music or Game. When you select the category, it is highlighted and the surround
mode changes.
To change the surround mode for the selected category navigate to the Surround Mode
menu in the AVR’s on-screen display menu, select the desired category, and use the Left/
Right buttons to select one of the available surround modes. See the Advanced Functions
section, on page 29, for more information.
OSD/Menu button: When the remote is controlling the AVR, press this button to display
the AVR’s on-screen display (OSD) menu. This button is also used within the tuner menus
and an iPod connected to the AVR’s front-panel USB port, and is also used to display the
main menu on some source devices.
Up/Down/Left/Right buttons: These buttons are used to navigate the menu system and
to operate the tuner.
OK button: This button is used to select items from the menu system.
Back/Exit button: Press this button to return to the previous menu or to exit the menu
system.
Home button: Press this button to display the Home menu for a Roku Streaming Stick™
that is connected to the AVR’s MHL/HDMI connector.
Number buttons: Use these buttons to enter numbers for radio-station frequencies or
to select station presets.
Clear button: Press this button to clear a radio station frequency you have started to
enter.
Test Tone button: Press this button to activate test noise that will circulate through each
speaker, allowing you to adjust the individual speaker levels. Use the Up/Down buttons
to switch the noise to a different speaker and use the Left/Right buttons to change the
volume of the speaker the noise is playing through.
Delay Adjust button: Pressing this button lets you adjust two different types of delay
settings (use the Up/Down buttons to cycle through the settings):
Lip Sync: This setting lets you resynchronize the audio and video signals from a•
source to eliminate a “lip sync” problem. Lip-sync issues can occur when the video
portion of a signal undergoes additional processing in either the source device or the
video display. Use the Left/Right buttons to delay the audio by up to 180ms.
Distance: These settings let you set the delay for each speaker to compensate for the•
different distances they may be from the listening position. Use the Up/Down buttons
to cycle through each of the system’s speakers, and use the Left/Right buttons to set
the distance each speaker is from the listening position. See Manual Speaker Setup,
on page 30, for more information.
Sleep button: Press this button to activate the sleep timer, which turns off the receiver
after a programmed period of time. Each press increases the time by 10 minutes, up to
90 minutes – ending with the “Sleep Off” message.
Volume Up/Down buttons: Press these buttons to raise or lower the volume.
Channel/Tuner buttons: When radio has been selected, press these buttons to select a
preset radio station. While operating a cable, satellite or HDTV set-top box or a television,
press these buttons to change channels.
Info/Option button: Press to display the available option settings for the current
source.
Display Dimmer button: Press this button to dim the AVR’s front-panel Message Display
partially or fully.
Preset Scan button: When Radio is the selected source, press this button to play each of
your preset radio stations in order for five seconds. Pressing the button again to remain
tuned to the current station.
RDS button (AVR 171/AVR 161 only): When listening to an FM radio station that
broadcasts RDS information, this button activates the various RDS functions.
Direct button: Press this button to directly tune to a radio station by using the Number
buttons to enter its frequency.
Memory button: Press this button to save the current radio or vTuner station as a
preset.
Transport Control buttons: These buttons are used to control source devices.
Previous Channel button: When TV is the selected source, press this button to switch
to the previously-tuned channel.
Harman Kardon
AVR 171 Service Manual
Page 8 of 174

34
AVR System Settings
System Settings
The AVR’s System Settings menu lets you customize in what way many of the AVR’s
features operate. Press the OSD/Menu button and navigate to the System line. Press the
OK button to display the System Settings menu.
Panel Timeout: This setting allows you to set theAVR’s front-panel display to automatically
turn off after remaining on for a predetermined time (3 – 10 seconds) each time you use
a control. Set this to “Off” to have the display remain on continually.
Auto Power Off: This setting allows you to set the AVR to automatically switch to the
Off mode after being in the Sleep mode for a predetermined time (1 – 8 hours). See
Power Indicator/Power Button, on page 4, for more information. It also allows the AVR to
automatically switch to the Sleep mode after being on for the predetermined amount of
time. Note that it will not transition to Sleep mode this way if the active source has one
of the Digital Audio Connectors selected as the Audio Input. See Source Setup, on page
23, for more information.
Menu Timeout: This setting allows you to set the amount of time (20 – 50 seconds) a
menu screen will remain on after the last adjustment. Set this to “Off” to have the menus
remain on continually until you press the OSD/Menu button.
Status Message: When the AVR is turned on, the volume is adjusted, the source is
changed or a change in the input signal is detected, a status message will be displayed
on the TV screen. Select how long the message remains visible, from 2 to 10 seconds,
with a default of 3 seconds. Select “Off” if you do not wish to see the status messages on
the TV screen (they will still appear on the AVR’s front-panel display).
Volume Default and Default Volume Setting: These two settings are used together to
program the volume level when you turn on the AVR. Set Volume Default to On, and then
set the Default Volume Setting to the desired turn-on volume. When Volume Default is
set to Off, the AVR will turn on at the last-used volume setting from the previous listening
session.
HDMI Audio to TV: This setting determines whether HDMI audio signals are passed
through the HDMI Monitor Out connector to the video display. In normal operation, leave
this setting at Off, as audio will be played through the AVR. To use the TV by itself, without
the home theater system, turn this setting to On.
HDMI Link: This setting allows the communication of control information among the
HDMI devices in your system. Turn this setting to On to allow control communication
between the HDMI devices; turn the setting to Off to forbid control communication.
Software Update: If a software upgrade is released for your AVR, installation instructions
will be available in the Product Support section of the Web site or from Harman Kardon
customer service. At that time, you may use this submenu to install the upgrade
software.
IMPORTANT: During a software upgrade, do not power off the AVR or use any of its
controls. Doing so could permanently damage the AVR.
Sleep Timer
The sleep timer sets the AVR to play for up to 90 minutes and then turn off
automatically.
Press the Sleep button on the remote, and the time until turn-off will be displayed.
Each additional press of the Sleep button increases the play time by 10 minutes, with a
maximum of 90 minutes. The SLEEP OFF setting disables the sleep timer.
When the sleep timer has been set, the front-panel display will automatically dim to half
brightness.
If you press the Sleep button after the timer has been set, the remaining play time will be
displayed. Press the Sleep button again to change the play time.
The front-panel display will count down during the final 10 seconds before going to Sleep
mode. Pressing any button during this countdown will cancel the process and disable
the Sleep timer.
Processor Reset
If the AVR behaves erratically after a power surge, unplug the AC power cord for at least
3 minutes. Plug the cord back in and turn the AVR on. If this procedure doesn’t help, reset
the AVR’s processor as described below.
NOTE: A processor reset erases all user configurations, including speaker and level
settings and tuner presets. After a reset, reenter all of these settings from your entries in
the Appendix worksheets.
To reset the AVR’s processor:
1. Press the front-panel Power Button for more than three seconds to turn the AVR off (the
Power Indicator will turn amber).
2. Press and hold the front-panel Surround Mode Category button for at least 5 seconds
until the RESET message appears on the front-panel display.
NOTE: After performing a processor reset, wait at least 1 minute before pressing any
Source Selector buttons.
If the AVR does not function correctly after a processor reset, contact an authorized
Harman Kardon service center for assistance. Authorized service centers may be located
by visiting our Web site at www.harmankardon.com.
Harman Kardon
AVR 171 Service Manual
Page 9 of 174

35
English
AVR Troubleshooting
Symptom Cause Solution
Unit does not function •NoACpower •EnsurethatthepowercordispluggedintoaliveAC
power outlet
•CheckiftheACoutletisswitch-controlled
Front-panel display lights, but there’s no sound or picture •Intermittentinputconnection
•Muteison
•Volumecontrolisturneddown
•Secureallinputandspeakerconnections
•PressMutebutton
•TurnupVolumecontrol
No sound from any speaker •Amplierisinprotectionmodeduetopossibleshort
circuit
•Amplierisinprotectionmodeduetointernal
problems
•CheckallspeakerwiresatspeakerandAVR
connections for crossed wires
•ContactyourlocalHarmanKardonservicecenter
No sound from center or surround speakers •Incorrectsurroundmode
•Programmaterialismonophonic
•Incorrectspeakerconguration
•Programmaterialisstereo
•Selectasurroundmodeotherthanstereo
•Monoprogramscontainnosurroundinformation
•Checkthespeakercongurationinthesetupmenu
•Thesurrounddecodermaynotcreatecenter-or
surround-channel information from nonencoded
programs
Unit does not respond to remote control commands •Weakbatteriesinremote
•Remotesensorisobscured
•Changebatteriesinremote
•EnsurethattheAVR’sfront-panelremotesensorisin
the line of sight of the remote
Intermittent buzzing in tuner •Localinterference •MovetheAVRorantennaawayfromcomputers,
fluorescent lights, motors or other electrical appliances
(AVR 1710/AVR 171 only): Surround-back speaker
settings cannot be accessed, and the test tone does not
play through the surround back speakers
•Multi-zoneoperationhasbeenselected/AssignedAMP
channels have been assigned to Zone 2
•UsetheSpeakerSetupmenutoreassigntheAssigned
AMP to the surround back left and right channels
Unable to activate remote control Programming mode •SourceSelectorbuttonisnotheldforatleast3
seconds
•BesuretoholdtheSourceSelectorbuttonforatleast
3 seconds
Remote buttons light, but AVR does not respond •RemoteisinZone2mode •PressZone2button(buttonwillnotilluminatewhen
remote is in Zone 1 control mode).
Unable to establish network connection •AVRnetworkprogrammingrequiresrebooting •CycletheAVRintotheOffmode,andthenturniton
again
Additional information on troubleshooting possible problems with your AVR and installation-related issues may be found in the list of “Frequently Asked Questions,” which is located
in the Product Support section of our Web site: www.harmankardon.com
Troubleshooting
Harman Kardon
AVR 171 Service Manual
Page 10 of 174

36
AVR Specifications
Specifications
Audio Section
Stereo power: AVR 1710/AVR 171: 100W per channel,
two channels driven @ 6/8 ohms, 1kHz,
<0.9% THD
AVR 1610/AVR 161: 85W per channel, two
channels driven @ 6/8 ohms, 1kHz, <0.9%
THD
Multichannel power: AVR 1710/AVR 171: 100W per channel,
two channels driven @ 6/8 ohms, 1kHz,
<0.9% THD
AVR 1610/AVR 161: 85W per channel, two
channels driven @ 6/8 ohms, 1kHz, <0.9%
THD
Input sensitivity/impedance: 250mV/27k ohms
Signal-to-noise ratio (IHF-A): 100dB
Surround system adjacent channel
separation:
Dolby Pro Logic/DPLII: 40dB
Dolby Digital: 55dB
DTS: 55dB
Frequency response (@ 1W): 10Hz – 130kHz (+0dB/–3dB)
High instantaneous current
capability (HCC):
±40 amps (AVR 1710/AVR 171);
±29 amps (AVR 1610/AVR 161)
Transient intermodulation
distortion (TIM): Unmeasurable
Slew rate: 40V/sec
FM Tuner Section
Frequency range: 87.5 – 108.0MHz
Usable sensitivity IHF: 1.3µV/13.2dBf
Signal-to-noise ratio (mono/stereo): 70dB/68dB
Distortion (mono/stereo): 0.2%/0.3%
Stereo separation: 40dB @ 1kHz
Selectivity (±400kHz): 70dB
Image rejection: 80dB
IF rejection: 80dB
AM Tuner Section
Frequency range: 520 – 1710kHz (AVR 1710/AVR 1610)
522 – 1620kHz (AVR 170/AVR 160)
Signal-to-noise ratio: 38dB
Usable sensitivity (loop): 500µV
Distortion (1kHz, 50% mod): 1.0%
Selectivity (±10kHz): 30dB
Bluetooth Section
Frequency range: 2402MHz - 2480MHz
Transmitter power: 0-4dBm
Modulation: GFSK, π/4-DQPSK, 8-DPSK
Functions: Streaming audio play, supports Bluetooth
3.0, A2DP v1.2, AVRCP v1.4
Video Section
Television format: NTSC (AVR 1710/AVR 1610);
PAL (AVR 171/AVR 161)
Input level/impedance: 1Vp-p/75 ohms
Output level/impedance: 1Vp-p/75 ohms
Video frequency response (composite
video): 10Hz – 8MHz (–3dB)
HDMI: HDMI 1.4 with 4k x 2k bypass
General Specifications
Power requirement: 120V AC/60Hz (AVR 1710/AVR 1610);
220V – 240V AC/50Hz – 60Hz (AVR 171/
AVR 161)
Power consumption: <0.5W (standby);
510W maximum (AVR 1710/AVR 171);
450W maximum (AVR 1610/AVR 161)
Dimensions (W x H x D): 17-5/16" x 4-3/4" x 11-3/16"
(440mm x 121mm x 300mm)
Weight (AVR 1710/AVR 171): 11 lb (5.1kg)
(AVR 1610/AVR 161): 10 lb (4.6kg)
Depth measurement includes knobs, buttons and terminal connections.
Height measurement includes feet and chassis.
Harman Kardon
AVR 171 Service Manual
Page 11 of 174

2. Package Drawing AVR171/230
MANUAL ASS'Y
BOX,OUT CARTON
3
4
1
DESCRIPTIONNO
CPS1A930
CQXAVR171/230
CPG1A972U
1
1
Q,tyPARTS NO.
CPS1A931PAD,RIGHT
2
1
PAD,LEFT
SET AVR1710SET
1
5
1
POLY BAG
NO DESCRIPTION PARTS NO. Q,ty
1
2
3
4
5
6
7
1
1
CPB1A190ZPOLY BAG
1. Instruction manual ass'y - Accessories(CQXAVR171/230)
SHEET,QUICK START GUIDE8 CQE1A570Z
1
CABR03PPBBATTERY
1
2
FM 1 POL ANT 1
2
BATTERY ASS'Y
4
9
3
AM LOOP ANTENNA ASS'Y
6
FM 1 POLE ANT(UL)
78
5
1
9
MICROPHONE ASS'Y
1CJXAVR365MICROMICROPHONE ASS'Y
SNOW PAD (R)
4
BOX ,OUT CARTON
6
SET
5
SNOW PAD (L)
3
MANUAL ASS'Y
1
1
SHEET,SAFETY CQE1A601Z 1
TRANSMITTER ASS'Y
REMOCON
REMOCON ASS'Y CARTAVR171-HK 1
SHEET,QUICK START GUIDE
10 STAPLE CPL0905 3
10
STAPLE
SHEET,SAFETY
CORD , POWER(EUR)
CJA2B120Z
CORD,POWER(PLUG+SOCKET)
CSA1A039ZANT, AM LOOP(9.5uH/5T) 1
CSA1A018Z
Harman Kardon
AVR 171 Service Manual
Page 12 of 174

DISASSEMBLY
Remove the Screws
4. Removing the Main PCB
~
1 6
~
1
28
Remove the Screws
3. Removing the Rear Panel
AVR171/230
1
1. Removing the Top Cabinet
Remove the Screws ~
13
Remove the Screws
2. Removing the Front Panel
1 7
~
1
7
5
4
3
6
2
2
1
3
46
5
20 21 22 23 24 25 26 27 2819
12456789 31011
13
12
18
17
16
15
14
3
1
2
13
12
11
10
7
9
8
4
6
5
Harman Kardon
AVR 171 Service Manual
Page 13 of 174

AVR171/230 EXPLODED VIEW
22
21
S1
S6
S1
S9
S7
S12
S5
S4
S3
S2
NO
17CTB3+8JFZRSCREW
SCREW
CTB3+6FFZR
CHD1A012R
SCREW
SCREW
SCREW
CTB3+10JR
CTW3+12JR
CTB3+10JFZR
CTWS3+10GR
11
21
4
23
2
13
DESCRIPTION PARTS NO. Q,ty
25
SCREW
S15
CHD1A036FZRSCREW, SPECIAL
2
S14
CHD4A012R
5
26
S5
S6
S5
40-1
S10 SCREW CTB3+6JR4
CHD1A036RSCREW, SPECIAL
SCREW CTB3+8JR 12
S6
S8 CTS3+8JFZRSCREW 4
S13 SCREW 5
SCREW CTB4+6FFZR 4
42-2
S6
S3
36
27
S6
25
15
14
20
24
23
42-1
42-3
S7
S3
S7
S6
S6
SCREW
16
FRONT PCB ASS'Y
29
36
40
30
31
32
33
35
34
23
24
25
26
28
27
17
18
19
20
22
21
COP12502B
3
10
11
12
13
15
14
7
6
5
4
9
8
PANEL,FRONT
2
1
INDICATOR,VOLUME
CGW1A533RHYB63
CGL1A300
1
11
1
1
1
1
1
1
1
40-1
40-2
40-3
40-4
FIP & KEY PCB
PHONE PCB
42 MAIN PCB ASS'Y COP12507B 1
1
1
1
1
1
1
KNOB,VOLUME CBN1A269B651
1
1
1
KNOB,STANDBY CBT2A1064
1
KNOB,BACK CBT2A1065
POWER LED PCB
VOLUME PCB
BRACKET,PCB L
FOOT A
FOOT B
CHASSIS,BOTTOM
CABINET,TOP
CUA1A343
CKL1A095
CKC1A219B64
CMD1A811
CKL1A094
2
2
1
1
1
CUSHION , FOOT CHG1A373 4
BRACKET , PCB CMD1A8102
11SHEET,BLIND CPE1A009
1
1
BRACKET,PCB R CMD1A8121
BRACKET,FAN CMD2A506 1
PANEL,REAR CKF6A463Z 1
41 DIGITAL PCB ASS'Y
COP12505C
1
42-1
42-2
MAIN PCB
GUIDE PCB(CARD)
1
1
37
BADGE, HARMAN/KARDON
CGB1A255Z
WINDOW,FIP CGU2A410A25J
BADGE,AVR171 CGB1A261Z
JACK,COVER CGR1A555B63
ORNAMENT,RING CGR1A538G5
INDICATOR,POWER CGL1A265Y
1
11
SHEET , VOLUME CGX1A476Z
HOLDER , LED CMH3A215
BRACKET,HDMI CMD1A8092
38
39
1
42-3 GUIDE PCB(CARD)
NO DESCRIPTION PARTS NO. Q,ty REMARK
1
MOTOR,FAN(60*60*25) CFNRDM6025S
32
2CUSHION , RUBBER CHG1A160Z
S6
36
S11
S1
S14
19
28
28
FILTER,FIP CMZ1A145
COVER , SCREW CMD1A8151
HEAT SINK CMY1A389
HOLDER , PCB CHE1704
BRACKET,FAN CMD1A8281
40-2
40-4
40-3
42-4
42-4 SHIELD PCB
40-5 JACK PCB ASS'Y 1
40-5
45
S1
S5
S6
S6
S6
S11
S11 SCREW CTW3+8JR 5
S16 SCREW CTB4+10JFZR2
PLATE , EARTH TOP CMC1A416 2
33
S1
S1
30
S3
S14
S3
S11
S6
S6
S15
2EA
5
1
6
7
16
18
17
18
18
18
16
11
4
S8
S8
S8
S8
17
10
3
2
12 13
S10
S10
9
8
S9
S2
S13
37
S4
Harman Kardo
n
AVR 171 Service Manua
l
Pa
g
e 14 of 174
41
44
45 AUDIO I/O ASSY COP12508C
SMPS PCB ASS'Y
44
COP12509C
1
1
1
1

Level Ref# Component Description Drawing No
..2 CBN1A269B65 KNOB , VOLUME
..2 CGL1A300 INDICATOR , VOLUME
..2 CGR1A555B63 COVER , JACK AVR1510
..2 CGWAVR171/230 FRONT PANEL ASS'Y
...3 CBT2A1064 KNOB , STANDBY
...3 CBT2A1065 KNOB , BACK
...3 CGB1A255Z BADGE , HARMAN/KARDON
...3 CGB1A261Z BADGE , AVR171
...3 CGL1A265Y INDICATOR , POWER AVR155
...3 CGR1A538G5 ORNAMENT , RING
...3 CGU2A410A25J WINDOW , FIP AVR170/230
...3 CGW1A533RHYB63 PANEL , FRONT AVR1710
...3 CGX1A476Z SHEET , VOLUME
...3 CMC1A416 PLATE , EARTH TOP
...3 CMH3A215 HOLDER , LED
...3 CMZ1A145 FILTER AVR1510
...3 COP12502B AVR1710 FRONT PCB ASS'Y
Level Ref# Component Description Drawing No
......6 C109 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 C121 CCUS1H151JA CAP, CHIP(1608, 50V/150pF)
......6 C151 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 C213 CCUS1H223KC CAP, CHIP(1608, 50V/0.022uF)
......6 C214 CCUS1H223KC CAP, CHIP(1608, 50V/0.022uF)
......6 C311 CCUS1H102KC CAP, CHIP(1608, 50V/1000pF)
......6 C322 CCUS1H102KC CAP, CHIP(1608, 50V/1000pF)
......6 C351 CCUS1H181JA CAP, CHIP(1608, 50V/180pF) 1608 SIZE
......6 C352 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 C353 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 C361 CCUS1H103KC CAP, CHIP(1608, 50V/0.01uF) 1608 SIZE
......6 C362 CCUS1H103KC CAP, CHIP(1608, 50V/0.01uF) 1608 SIZE
......6 C363 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 C364 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 C365 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 C366 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 C421 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 C422 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 C423 CCUS1H680JA CAP, CHIP(1608, 50V/68pF)
......6 C431 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 C441 CCUS1H223KC CAP, CHIP(1608, 50V/0.022uF)
......6 C442 CCUS1H223KC CAP, CHIP(1608, 50V/0.022uF)
......6 C451 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 C456 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 C557 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 C558 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 C601 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 C602 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 C603 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 C604 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 C605 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 C644 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 C645 CCUS1H471JA CAP, CHIP(1608, 50V/470pF)
......6 C646 CCUS1H471JA CAP, CHIP(1608, 50V/470pF)
......6 C647 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 C714 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 C715 CCUS0J475KC CAP, CHIP(1608, 6.3V/4.7uF, MURATA GRM18) GRM188R60J475KE19D
......6 C732 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 C751 CCUS1H222KC CAP, CHIP(1608, 50V/2200pF)
......6 C752 CCUS1H102KC CAP, CHIP(1608, 50V/1000pF)
......6 C753 CCUS1H102KC CAP, CHIP(1608, 50V/1000pF)
......6 C754 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 C801 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 C802 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 C813 CCUS1H470JA CAP, CHIP(1608, 50V/47pF)
......6 C821 CCUS1H471JA CAP, CHIP(1608, 50V/470pF)
......6 C822 CCUS1H151JA CAP, CHIP(1608, 50V/150pF)
......6 C830 CCUS1H473KC CAP, CHIP(1608, 50V/0.047uF)
......6 C911 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 C912 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 C923 CCUS1H681JA CAP, CHIP(1608, 50V/680pF)
......6 C924 CCUS1H681JA CAP, CHIP(1608, 50V/680pF)
......6 C951 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 C952 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
......6 D1 CVD1SS355T DIODE , CHIP , SWITCHING 1SS355(T/B)
......6 D2 CVD1SS355T DIODE , CHIP , SWITCHING 1SS355(T/B)
......6 D361 CVD1SS355T DIODE , CHIP , SWITCHING 1SS355(T/B)
AVR 171/230 SPARE PARTS LIST
Harman Kardon
AVR 171 Service Manual
Page 15 of 174

...3 COP12502B AVR1710 FRONT PCB ASS'Y
Level Ref# Component Description Drawing No
......6 D362 CVD1SS355T DIODE , CHIP , SWITCHING 1SS355(T/B)
......6 D363 CVD1SS355T DIODE , CHIP , SWITCHING 1SS355(T/B)
......6 D643 CVD1SS355T DIODE , CHIP , SWITCHING 1SS355(T/B)
......6 D644 CVD1SS355T DIODE , CHIP , SWITCHING 1SS355(T/B)
......6 D955 CVD1SS355T DIODE , CHIP , SWITCHING 1SS355(T/B)
......6 IC13 CVISN74ACT04DR I.C , HEX INVERTERS(SOIC/D-14P) SN74ACT04DR
......6 IC14 CVINJM4580CG I.C , DUAL OPAMP(SOP-8P)
......6 IC421 HVINJM2244MTE1 I.C , VIDEO SWITCH QRW-6500
......6 IC91 HVTKTC812TB T.R , CHIP(TS6) KTC812T-B-RTK/P
......6 IC92 HVTKTC812TB T.R , CHIP(TS6) KTC812T-B-RTK/P
......6 L451 HLZ9Z014Z CHIP , BEAD HU-1M4516-600JT
......6 Q111 CVTRT1P144C T.R,RT1P144C(10K-47K) RT1P144C-T112-1
......6 Q112 CVTRT1N144C T.R,RT1N144C(10K-47K) RT1N144C
......6 Q113 CVTRT1N144C T.R,RT1N144C(10K-47K) RT1N144C
......6 Q114 CVTRT1N144C T.R,RT1N144C(10K-47K) RT1N144C
......6 Q252 CVTRT1N144C T.R,RT1N144C(10K-47K) RT1N144C
......6 Q362 CVTRT1N141C T.R,RT1N141C(10K-10K) RT1N141C
......6 Q363 CVTRT1P141C T.R,RT1P141C(10K-10K) RT1P141C-T112-1
......6 Q373 CVTRT1P144C T.R,RT1P144C(10K-47K) RT1P144C-T112-1
......6 Q721 CVTRT1N144C T.R,RT1N144C(10K-47K) RT1N144C
......6 Q906 CVTRT1P144C T.R,RT1P144C(10K-47K) RT1P144C-T112-1
......6 Q907 CVTRT1P144C T.R,RT1P144C(10K-47K) RT1P144C-T112-1
......6 Q955 CVTRT1N144C T.R,RT1N144C(10K-47K) RT1N144C
......6 R101 CRJ10DJ221T RES, CHIP(1608/5%/220ohm) 00200-0101
......6 R102 CRJ10DJ681T RES, CHIP(1608/5%/680ohm) 00200-0120
......6 R104 CRJ10DJ103T RES, CHIP(1608/5%/10Kohm) 00200-0096
......6 R108 CRJ10DJ0R0T RES, CHIP(1608/5%/0ohm) 00200-0090
......6 R109 CRJ10DJ0R0T RES, CHIP(1608/5%/0ohm) 00200-0090
......6 R110 CRJ10DJ0R0T RES, CHIP(1608/5%/0ohm) 00200-0090
......6 R111 CRJ10DJ0R0T RES, CHIP(1608/5%/0ohm) 00200-0090
......6 R112 CRJ10DJ0R0T RES, CHIP(1608/5%/0ohm) 00200-0090
......6 R113 CRJ10DJ0R0T RES, CHIP(1608/5%/0ohm) 00200-0090
......6 R122 CRJ10DJ100T RES, CHIP(1608/5%/10ohm) 1608 SIZE
......6 R151 CRJ10DJ0R0T RES, CHIP(1608/5%/0ohm) 00200-0090
......6 R201 CRJ10DJ101T RES, CHIP(1608/5%/100ohm) 00200-0100
......6 R202 CRJ10DJ101T RES, CHIP(1608/5%/100ohm) 00200-0100
......6 R203 CRJ10DJ101T RES, CHIP(1608/5%/100ohm) 00200-0100
......6 R211 CRJ10DJ101T RES, CHIP(1608/5%/100ohm) 00200-0100
......6 R213 CRJ10DJ272T RES, CHIP(1608/5%/2.7Kohm)
......6 R214 CRJ10DJ272T RES, CHIP(1608/5%/2.7Kohm)
......6 R251 CRJ10DJ222T RES, CHIP(1608/5%/2.2Kohm) 00200-0142
......6 R252 CRJ10DJ393T RES, CHIP(1608/5%/39Kohm)
......6 R312 CRJ10DF1001T RES, CHIP(1608/1%/1Kohm) RM06FB1K
......6 R313 CRJ10DF1501T RES, CHIP(1608/1%/1.5Kohm) 1.5K /1/10W/F
......6 R314 CRJ10DF1801T RES, CHIP(1608/1%/1.8Kohm) 1.8K /1/10W/F
......6 R315 CRJ10DF2701T RES, CHIP(1608/1%/2.7Kohm) RM06FB2K7
......6 R316 CRJ10DF3301T RES, CHIP(1608/1%/3.3Kohm)
......6 R322 CRJ10DF1001T RES, CHIP(1608/1%/1Kohm) RM06FB1K
......6 R323 CRJ10DF1501T RES, CHIP(1608/1%/1.5Kohm) 1.5K /1/10W/F
......6 R324 CRJ10DF1801T RES, CHIP(1608/1%/1.8Kohm) 1.8K /1/10W/F
......6 R325 CRJ10DF2701T RES, CHIP(1608/1%/2.7Kohm) RM06FB2K7
......6 R326 CRJ10DF3301T RES, CHIP(1608/1%/3.3Kohm)
......6 R327 CRJ10DF5601T RES, CHIP(1608/1%/5.6Kohm) 00200-0234
......6 R328 CRJ10DF5601T RES, CHIP(1608/1%/5.6Kohm) 00200-0234
......6 R351 CRJ10DJ750T RES, CHIP(1608/5%/75ohm) 1608 SIZE
......6 R352 CRJ10DJ103T RES, CHIP(1608/5%/10Kohm) 00200-0096
......6 R353 CRJ10DJ103T RES, CHIP(1608/5%/10Kohm) 00200-0096
......6 R361 CRJ10DJ1R0T RES, CHIP(1608/5%/1ohm) 1608 SIZE
......6 R362 CRJ10DJ1R0T RES, CHIP(1608/5%/1ohm) 1608 SIZE
......6 R363 CRJ10DJ103T RES, CHIP(1608/5%/10Kohm) 00200-0096
......6 R364 CRJ10DJ4R7T RES, CHIP(1608/5%/4.7ohm) 00200-0099
......6 R365 CRJ10DJ4R7T RES, CHIP(1608/5%/4.7ohm) 00200-0099
......6 R366 CRJ10DJ103T RES, CHIP(1608/5%/10Kohm) 00200-0096
......6 R367 CRJ10DJ0R0T RES, CHIP(1608/5%/0ohm) 00200-0090
......6 R368 CRJ10DJ102T RES, CHIP(1608/5%/1Kohm) 00200-0094
......6 R375 CRJ10DJ103T RES, CHIP(1608/5%/10Kohm) 00200-0096
......6 R376 CRJ10DJ221T RES, CHIP(1608/5%/220ohm) 00200-0101
......6 R377 CRJ10DJ473T RES, CHIP(1608/5%/47Kohm) 00200-0185
......6 R378 CRJ10DJ103T RES, CHIP(1608/5%/10Kohm) 00200-0096
......6 R379 CRJ10DJ221T RES, CHIP(1608/5%/220ohm) 00200-0101
......6 R381 CRJ10DJ0R0T RES, CHIP(1608/5%/0ohm) 00200-0090
......6 R402 CRJ14CJ4R7T RES, CHIP(3216/5%/4.7ohm) 3216
......6 R404 CRJ14CJ4R7T RES, CHIP(3216/5%/4.7ohm) 3216
......6 R421 CRJ10DJ105T RES, CHIP(1608/5%/1Mohm) 00200-0095
......6 R422 CRJ10DJ105T RES, CHIP(1608/5%/1Mohm) 00200-0095
......6 R423 CRJ10DJ105T RES, CHIP(1608/5%/1Mohm) 00200-0095
......6 R424 CRJ10DJ0R0T RES, CHIP(1608/5%/0ohm) 00200-0090
Harman Kardon
AVR 171 Service Manual
Page 16 of 174

...3 COP12502B AVR1710 FRONT PCB ASS'Y
Level Ref# Component Description Drawing No
......6 R425 CRJ10DJ101T RES, CHIP(1608/5%/100ohm) 00200-0100
......6 R426 CRJ10DJ101T RES, CHIP(1608/5%/100ohm) 00200-0100
......6 R431 CRJ10DJ100T RES, CHIP(1608/5%/10ohm) 1608 SIZE
......6 R432 CRJ10DJ100T RES, CHIP(1608/5%/10ohm) 1608 SIZE
......6 R451 CRJ10DJ472T RES, CHIP(1608/5%/4.7Kohm) 00200-0087
......6 R452 CRJ10DJ472T RES, CHIP(1608/5%/4.7Kohm) 00200-0087
......6 R453 CRJ10DJ472T RES, CHIP(1608/5%/4.7Kohm) 00200-0087
......6 R454 CRJ10DJ472T RES, CHIP(1608/5%/4.7Kohm) 00200-0087
......6 R455 CRJ14CJ101T RES, CHIP(3216/5%/100ohm) 3216
......6 R456 CRJ14CJ101T RES, CHIP(3216/5%/100ohm) 3216
......6 R457 CRJ10DJ103T RES, CHIP(1608/5%/10Kohm) 00200-0096
......6 R601 CRJ10DJ103T RES, CHIP(1608/5%/10Kohm) 00200-0096
......6 R602 CRJ10DJ103T RES, CHIP(1608/5%/10Kohm) 00200-0096
......6 R603 CRJ10DJ103T RES, CHIP(1608/5%/10Kohm) 00200-0096
......6 R604 CRJ10DJ103T RES, CHIP(1608/5%/10Kohm) 00200-0096
......6 R605 CRJ10DJ103T RES, CHIP(1608/5%/10Kohm) 00200-0096
......6 R641 CRJ10DJ0R0T RES, CHIP(1608/5%/0ohm) 00200-0090
......6 R643 CRJ10DJ0R0T RES, CHIP(1608/5%/0ohm) 00200-0090
......6 R644 CRJ10DJ0R0T RES, CHIP(1608/5%/0ohm) 00200-0090
......6 R701 CRJ10DJ102T RES, CHIP(1608/5%/1Kohm) 00200-0094
......6 R702 CRJ10DJ102T RES, CHIP(1608/5%/1Kohm) 00200-0094
......6 R703 CRJ10DJ102T RES, CHIP(1608/5%/1Kohm) 00200-0094
......6 R711 CRJ10DJ470T RES, CHIP(1608/5%/47ohm) 00200-0098
......6 R712 CRJ10DJ470T RES, CHIP(1608/5%/47ohm) 00200-0098
......6 R713 CRJ10DJ470T RES, CHIP(1608/5%/47ohm) 00200-0098
......6 R721 CRJ10DJ103T RES, CHIP(1608/5%/10Kohm) 00200-0096
......6 R722 CRJ10DJ101T RES, CHIP(1608/5%/100ohm) 00200-0100
......6 R731 CRJ10DJ100T RES, CHIP(1608/5%/10ohm) 1608 SIZE
......6 R735 CRJ10DJ152T RES, CHIP(1608/5%/1.5Kohm) 00200-0119
......6 R741 CRJ10DJ123T RES, CHIP(1608/5%/12Kohm) 1608 SIZE
......6 R742 CRJ10DJ102T RES, CHIP(1608/5%/1Kohm) 00200-0094
......6 R811 CRJ10DJ104T RES, CHIP(1608/5%/100Kohm) 00200-0097
......6 R812 CRJ10DJ102T RES, CHIP(1608/5%/1Kohm) 00200-0094
......6 R813 CRJ10DJ103T RES, CHIP(1608/5%/10Kohm) 00200-0096
......6 R821 CRJ10DJ102T RES, CHIP(1608/5%/1Kohm) 00200-0094
......6 R822 CRJ10DJ103T RES, CHIP(1608/5%/10Kohm) 00200-0096
......6 R823 CRJ10DJ104T RES, CHIP(1608/5%/100Kohm) 00200-0097
......6 R834 CRJ10DJ222T RES, CHIP(1608/5%/2.2Kohm) 00200-0142
......6 R835 CRJ10DJ103T RES, CHIP(1608/5%/10Kohm) 00200-0096
......6 R836 CRJ10DJ152T RES, CHIP(1608/5%/1.5Kohm) 00200-0119
......6 R901 CRJ10DJ101T RES, CHIP(1608/5%/100ohm) 00200-0100
......6 R902 CRJ10DJ101T RES, CHIP(1608/5%/100ohm) 00200-0100
......6 R921 CRJ10DJ102T RES, CHIP(1608/5%/1Kohm) 00200-0094
......6 R922 CRJ10DJ102T RES, CHIP(1608/5%/1Kohm) 00200-0094
......6 R923 CRJ10DJ152T RES, CHIP(1608/5%/1.5Kohm) 00200-0119
......6 R924 CRJ10DJ152T RES, CHIP(1608/5%/1.5Kohm) 00200-0119
......6 R925 CRJ10DJ104T RES, CHIP(1608/5%/100Kohm) 00200-0097
......6 R926 CRJ10DJ104T RES, CHIP(1608/5%/100Kohm) 00200-0097
......6 R931 CRJ10DJ104T RES, CHIP(1608/5%/100Kohm) 00200-0097
......6 R932 CRJ10DJ104T RES, CHIP(1608/5%/100Kohm) 00200-0097
......6 R933 CRJ10DJ221T RES, CHIP(1608/5%/220ohm) 00200-0101
......6 R934 CRJ10DJ221T RES, CHIP(1608/5%/220ohm) 00200-0101
......6 R935 CRJ10DJ221T RES, CHIP(1608/5%/220ohm) 00200-0101
......6 R936 CRJ10DJ221T RES, CHIP(1608/5%/220ohm) 00200-0101
......6 R941 CRJ10DJ472T RES, CHIP(1608/5%/4.7Kohm) 00200-0087
......6 R942 CRJ10DJ472T RES, CHIP(1608/5%/4.7Kohm) 00200-0087
......6 R943 CRJ10DJ472T RES, CHIP(1608/5%/4.7Kohm) 00200-0087
......6 R944 CRJ10DJ472T RES, CHIP(1608/5%/4.7Kohm) 00200-0087
......6 R955 CRJ10DJ101T RES, CHIP(1608/5%/100ohm) 00200-0100
......6 ZD451 HVDUDZS5.6BSR DIODE , ZENER(CHIP,5.6V) UDZSTE-175.6B
......6 ZD452 HVDUDZS5.6BSR DIODE , ZENER(CHIP,5.6V) UDZSTE-175.6B
......6 ZD453 HVDUDZS5.6BSR DIODE , ZENER(CHIP,5.6V) UDZSTE-175.6B
.....5 C108 CCEA1AH471TC CAP, ELECT(10V/470uF)
.....5 C122 CCEA1AKS331TC CAP, ELECT(10V/330uF)-S
.....5 C152 CCEA1HH100TC CAP, ELECT(50V/10uF)
.....5 C251 CCEA1CH101TC CAP, ELECT(16V/100uF)
.....5 C252 CCEA1HKS2R2TC CAP, ELECT(50V/2.2uF)-S
.....5 C401 CCEA1HH470TC CAP , ELECT (50V/47uF)
.....5 C424 CCEA1AH471TC CAP, ELECT(10V/470uF)
.....5 C425 CCEA1HH100TC CAP, ELECT(50V/10uF)
.....5 C426 CCEA1HH100TC CAP, ELECT(50V/10uF)
.....5 C452 CCEA1CH101TC CAP, ELECT(16V/100uF)
.....5 C453 CCEA1JH470TCS CAP , ELECT(63V/47uF),105'C
.....5 C454 CCME2E273JX14T CAP , POLYESTER FILM(250V/0.027UF, 5%)
.....5 C455 CCEA1CH101TC CAP, ELECT(16V/100uF)
.....5 C556 CCEA1AKS331TC CAP, ELECT(10V/330uF)-S
.....5 C559 CCEA1AKS331TC CAP, ELECT(10V/330uF)-S
Harman Kardon
AVR 171 Service Manual
Page 17 of 174

...3 COP12502B AVR1710 FRONT PCB ASS'Y
Level Ref# Component Description Drawing No
.....5 C721 CCEA1HKS2R2TC CAP, ELECT(50V/2.2uF)-S
.....5 C731 CCEA1AH471TC CAP, ELECT(10V/470uF)
.....5 C811 CCEA1HH100TC CAP, ELECT(50V/10uF)
.....5 C823 CCEA1HH100TC CAP, ELECT(50V/10uF)
.....5 C901 CCEA1HH100TC CAP, ELECT(50V/10uF)
.....5 C902 CCEA1HH100TC CAP, ELECT(50V/10uF)
.....5 C931 CCEA1CH331TC CAP, ELECT(16V/330uF)
.....5 C932 CCEA1CH331TC CAP, ELECT(16V/330uF)
.....5 C933 CCEA1VKS470TCS CAP, ELECT(35V/47uF, 105'C)-S
.....5 C944 CCEA1VKS470TCS CAP, ELECT(35V/47uF, 105'C)-S
.....5 ET90 CJT1A026 PLATE , EARTH(TRONIC ELECTRONICS)
.....5 L452 CLZ9Z112Z COIL , CHOKE ( 220uH )
.....5 Q251 HVTKTA1271YT T.R KTA1271-Y-AT/P
.....5 Q361 HVTKTA1266YT T.R KTA1266-Y-AT/PJ
.....5 Q451 CVTKTC1027YT T.R KTC1027Y
.....5 Q452 CVTKTC1027YT T.R KTC1027Y
.....5 S311 CST1A024ZT SW , TACT
.....5 S312 CST1A024ZT SW , TACT
.....5 S313 CST1A024ZT SW , TACT
.....5 S314 CST1A024ZT SW , TACT
.....5 S315 CST1A024ZT SW , TACT
.....5 S316 CST1A024ZT SW , TACT
.....5 S317 CST1A024ZT SW , TACT
.....5 S318 CST1A024ZT SW , TACT
.....5 S319 CST1A024ZT SW , TACT
.....5 S320 CST1A024ZT SW , TACT
.....5 S321 CST1A024ZT SW , TACT
.....5 S322 CST1A024ZT SW , TACT
.....5 S323 CST1A024ZT SW , TACT
.....5 S330 CST1A024ZT SW , TACT
....4 BK71 CMD1A572-V1 BRACKET , FIP
....4 BK72 CMD1A572-V1 BRACKET , FIP
....4 BN71 CWB1B007150HC WIRE ASS'Y Locking (YH) (7P,2MM,150MM,#26)
....4 BN72 CWB1B005100HC WIRE ASS'Y Locking (YH) (5P,2MM,100MM,26#)
....4 BN73 CJP06GB142ZB PIN HEADER(6P, 2.54mm)
....4 BN76 CWB1C207380H6001 WIRE ASS'Y (7P,2.0mm,380mm,Shield_ANGLE)_usb
....4 BN78 CWB1B005100HC WIRE ASS'Y Locking (YH) (5P,2MM,100MM,26#)
....4 CN72 CJP05GJ288ZY LOCK-WAFER/ANGLE/2MM PITCH/5PIN
....4 CN73 CJP06GB143ZB FEMALE HEADER(6P, 2.54mm)
....4 CN78 CJP05GI236ZW LOCKING TYPE , STRAIGHT WAFER , 2mm A2008WV0-5P
....4 D101 CVD1L0345W31BOCT201V L.E.D , WHITE
....4 D102 CVD30ASOGCAA-S7 L.E.D , ORANGE
....4 D201 CVD1L0345W31BOCT201V L.E.D , WHITE
....4 D202 CVD1L0345W31BOCT201V L.E.D , WHITE
....4 D203 CVD1L0345W31BOCT201V L.E.D , WHITE
....4 FIP1 CFL162SD19GINK V.F.D , (FUTABA, 162-SD-19GINK) 162SD19GINK
....4 IC12 CRVKSM603TE5B SENSOR , REMOCON
....4 IC15 HVINJM4556AL I.C , HEADPHONE (JRC) NJM4556AL
....4 IC371 BVIKP1010B IC, PHOTO COUPLER (COSMO)
....4 IC372 BVIKP1010B IC, PHOTO COUPLER (COSMO)
....4 JK351 CJJ4M044X JACK , RCA (1P,RCA-115A-04) RCA-115A-04
....4 JK352 CJSJSR1124 MODULE , OPTICAL(RX 16MHz)
....4 JK353 CJSJSR1124 MODULE , OPTICAL(RX 16MHz)
....4 JK401 CJJ4S010Z JACK , BOARD RCA-325A-02
....4 JK402 CJJ2D008Z JACK, STEREO (BLK MOLD) PJ-308-02
....4 JK403 CJJ2D008Z JACK, STEREO (BLK MOLD) PJ-308-02
....4 JK404 CJJ2D008Z JACK, STEREO (BLK MOLD) PJ-308-02
....4 JK53 CJJ9X012Z JACK , USB (ANGLE TYPE)
....4 JK64 CJJ2E026Z JACK, PHONES(6.35mm,SILVER) PJ-612A-51
....4 JW19 CWE8202150RV WIRE ASS'Y HTS-5000
....4 JW20 CWE8202120RV WIRE ASS'Y PM-4200
....4 RL91 CSL4A016ZU RELAY,BC3-12H,DC12V,2C2P BC3-12H
....4 TF94 CLT9Z092ZE TRANS , DC-AC (AVR1X1)
....4 VR74 CSR2A037Z ENCODER
....4 WF31 CJP13GA285ZN WAFER, FFC(13P-1.25mm, STRAIGHT)
....4 WF70 CJP23GA285ZN WAFER,FPC 1.25mm,stright
...3 COP12510B AVR1710 BT PCB ASS'Y
Level Ref# Component Description Drawing No
.......7 AN1101 CLA9V003Z BLUETOOTH ANT , CHIP(3.0*1.5) 2.425MHz
.......7 C1101 CCUS1A105KC CAP, CHIP(1608, 10V/1uF)
.......7 C1109 CCUI1H101JA CAP, CHIP(1005, 50V/100pF) 0402N101J500HI
.......7 C1111 CCUI1H101JA CAP, CHIP(1005, 50V/100pF) 0402N101J500HI
.......7 C1112 CCUI1H1R2CA CAP, CHIP(1005, 50V/1.2pF)
.......7 C1134 CCUS0J225KC CAP, CHIP(1608, 6.3V/2.2uF)
.......7 C1135 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
Harman Kardon
AVR 171 Service Manual
Page 18 of 174

...3 COP12510B AVR1710 BT PCB ASS'Y
Level Ref# Component Description Drawing No
.......7 C1136 CCUC0J106KC CAP, CHIP(2012, 6.3V/10uF, X7R) LAO-63V103MS56PW#
.......7 D1100 CVD1SS355T DIODE , CHIP , SWITCHING 1SS355(T/B)
.......7 D1101 CVD1SS355T DIODE , CHIP , SWITCHING 1SS355(T/B)
.......7 IC1101 CVIMX25L8006EM2I-12G I.C , SERIAL FLASH(8M)
.......7 R1113 CRJ10DJ473T RES, CHIP(1608/5%/47Kohm) 00200-0185
.......7 R1119 CRJ10DJ102T RES, CHIP(1608/5%/1Kohm) 00200-0094
.......7 R1120 CRJ10DJ102T RES, CHIP(1608/5%/1Kohm) 00200-0094
.......7 R1121 CRJ10DJ102T RES, CHIP(1608/5%/1Kohm) 00200-0094
.......7 R1122 CRJ10DJ102T RES, CHIP(1608/5%/1Kohm) 00200-0094
......6 CIP12510BTSMD AVR1710 BT PCB TOP SMD ASS'Y
.......7 CUP12510Z PCB,AVR1710 BT(FR-4/2L/293X181)
.......7 CN1101 CJP17GB210ZY WAFER, (CARD CABLE,ANGLE, SMT, 1MM,10008HR-17L(P)
.......7 CN1102 CJP07GA193ZY WAFER, FFC, SMD(07P-1mm, STRAIGHT)
.......7 C1100 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1102 CCUC0J106KC CAP, CHIP(2012, 6.3V/10uF, X7R) LAO-63V103MS56PW#
.......7 C1103 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
.......7 C1104 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
.......7 C1130 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1131 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1132 CCUS0J225KC CAP, CHIP(1608, 6.3V/2.2uF)
.......7 C1133 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
.......7 C1137 CCUS1H222KC CAP, CHIP(1608, 50V/2200pF)
.......7 C1138 CCUS1H222KC CAP, CHIP(1608, 50V/2200pF)
.......7 C1139 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
.......7 C1140 CCUC0J106KC CAP, CHIP(2012, 6.3V/10uF, X7R) LAO-63V103MS56PW#
.......7 C1141 CCEC1CMVG100T CAP,ALUMINUM ELECTROLYTIC (16V/10uF)
.......7 C1142 CCEC1CMVG100T CAP,ALUMINUM ELECTROLYTIC (16V/10uF)
.......7 IC1100 CNVBM840-AVR171 MODULE, BLUETOOTH SPEC 4.0
.......7 IC1102 CVIPCM5100PWR I.C , 2CH DAC(32BIT,384KHZ,TSSOP-20P)
.......7 L1130 CLZ9R005V FERRITE CHIP BEAD(1608/60R, CB03YTYH600)
.......7 RN1100 CRJ104DJ330T RES, CHIP(1608/5%/33ohm*4)
.......7 R1100 CRJ06IJ332T RES, CHIP(1005/5%/3.3Kohm) RM04JC3K3
.......7 R1101 CRJ06IJ103T RES, CHIP(1005/5%/10Kohm) RM04JC10K
.......7 R1102 CRJ06IJ103T RES, CHIP(1005/5%/10Kohm) RM04JC10K
.......7 R1103 CRJ06IJ332T RES, CHIP(1005/5%/3.3Kohm) RM04JC3K3
.......7 R1104 CRJ06IJ103T RES, CHIP(1005/5%/10Kohm) RM04JC10K
.......7 R1105 CRJ10DJ0R0T RES, CHIP(1608/5%/0ohm) 00200-0090
.......7 R1106 CRJ10DJ0R0T RES, CHIP(1608/5%/0ohm) 00200-0090
.......7 R1107 CRJ10DJ0R0T RES, CHIP(1608/5%/0ohm) 00200-0090
.......7 R1108 CRJ10DJ0R0T RES, CHIP(1608/5%/0ohm) 00200-0090
.......7 R1114 CRJ10DJ103T RES, CHIP(1608/5%/10Kohm) 00200-0096
.......7 R1115 CRJ10DJ102T RES, CHIP(1608/5%/1Kohm) 00200-0094
.......7 R1116 CRJ10DJ102T RES, CHIP(1608/5%/1Kohm) 00200-0094
.......7 R1117 CRJ10DJ104T RES, CHIP(1608/5%/100Kohm) 00200-0097
.......7 R1118 CRJ10DJ0R0T RES, CHIP(1608/5%/0ohm) 00200-0090
.......7 R1129 CRJ06IJ103T RES, CHIP(1005/5%/10Kohm) RM04JC10K
.......7 R1130 CRJ06IJ103T RES, CHIP(1005/5%/10Kohm) RM04JC10K
.......7 R1132 CRJ10DJ103T RES, CHIP(1608/5%/10Kohm) 00200-0096
.......7 R1133 CRJ10DJ103T RES, CHIP(1608/5%/10Kohm) 00200-0096
.......7 R1134 CRJ10DJ471T RES, CHIP(1608/5%/470ohm) 00200-0088
.......7 R1135 CRJ10DJ471T RES, CHIP(1608/5%/470ohm) 00200-0088
.......7 R1136 CRJ10DJ104T RES, CHIP(1608/5%/100Kohm) 00200-0097
.......7 R1137 CRJ10DJ104T RES, CHIP(1608/5%/100Kohm) 00200-0097
....4 BK21 CMD1A629 BRACKET , PCB
....4 BK22 CMD1A629 BRACKET , PCB
...3 CPE1A009 SHEET , BLIND
...3 CTB3+10JR SCREW
...3 CTWS3+10GR SCREW
...3 CWC4F2A17A180B10 CARD , CABLE (17P,1.0mm,180mm,B,10mm)
...3 CWC6C4A23B220B10 CARD , CABLE (23P,1.25mm,220mm,B,10mm)
..2 CKC1A219B64 CABINET, TOP AVR1510
..2 CQB1A549Y LABEL , ATTENTION DVD48
..2 CQB1A622 LABEL , SERIAL NO DVD-310
..2 CTB3+8JFZR SCREW
..2 CTB4+10JFZR SCREW
..2 CTB4+6FFZR SCREW
..2 CUAAVR171/230 BOTTOM CHASSIS ASS'Y
...3 CFNRDM6025S-150 MOTOR , FAN (60X60X25, 150mm)12V, 0.1A
...3 CHD1A036FZR SCREW , SPECIAL
...3 CHD4A012R SCREW , SPECIAL
...3 CHE170 HOLDER , PCB ALL MODEL
...3 CHG1A160Z CUSHION , RUBBER
...3 CHG1A373 CUSHION , FOOT AVR350
...3 CHS1A032 TAPE , HEMELON
...3 CKF6A463Z PANEL , REAR AVR171
...3 CKL1A094 FOOT , A AVR350
...3 CKL1A095 FOOT , B AVR350
Harman Kardon
AVR 171 Service Manual
Page 19 of 174

...3 COP12510B AVR1710 BT PCB ASS'Y
Level Ref# Component Description Drawing No
...3 CMD1A809 BRACKET , HDMI
...3 CMD1A815 COVER , SCREW
...3 CMD2A506 BRACKET , FAN
...3 COP12505C AVR171/230 DIGITAL PCB ASS'Y (EUR)
Level Ref# Component Description Drawing No
.......7 C1002 CCUC1A226KC CAP, CHIP(2012, 10V/22uF)
.......7 C1003 CCUS1H104KC CAP, CHIP(1608, 50V/0.1uF)
.......7 C1008 CCUS1A105KC CAP, CHIP(1608, 10V/1uF)
.......7 C1010 CCUS1A105KC CAP, CHIP(1608, 10V/1uF)
.......7 C1012 CCUS1A105KC CAP, CHIP(1608, 10V/1uF)
.......7 C1014 CCUS1A105KC CAP, CHIP(1608, 10V/1uF)
.......7 C1016 CCUS1A105KC CAP, CHIP(1608, 10V/1uF)
.......7 C1017 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1018 CCUS0J475KC CAP, CHIP(1608, 6.3V/4.7uF, MURATA GRM18) GRM188R60J475KE19D
.......7 C1019 CCUS0J475KC CAP, CHIP(1608, 6.3V/4.7uF, MURATA GRM18) GRM188R60J475KE19D
.......7 C1022 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1023 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1024 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1025 CCUS0J475KC CAP, CHIP(1608, 6.3V/4.7uF, MURATA GRM18) GRM188R60J475KE19D
.......7 C1027 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1028 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1029 CCUS0J475KC CAP, CHIP(1608, 6.3V/4.7uF, MURATA GRM18) GRM188R60J475KE19D
.......7 C1030 CCUS0J475KC CAP, CHIP(1608, 6.3V/4.7uF, MURATA GRM18) GRM188R60J475KE19D
.......7 C1031 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1032 CCUS0J475KC CAP, CHIP(1608, 6.3V/4.7uF, MURATA GRM18) GRM188R60J475KE19D
.......7 C1033 CCUS0J475KC CAP, CHIP(1608, 6.3V/4.7uF, MURATA GRM18) GRM188R60J475KE19D
.......7 C1034 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1035 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1036 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1037 CCUS0J475KC CAP, CHIP(1608, 6.3V/4.7uF, MURATA GRM18) GRM188R60J475KE19D
.......7 C1038 CCUS0J475KC CAP, CHIP(1608, 6.3V/4.7uF, MURATA GRM18) GRM188R60J475KE19D
.......7 C1039 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1040 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1041 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1042 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1043 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1044 CCUS0J475KC CAP, CHIP(1608, 6.3V/4.7uF, MURATA GRM18) GRM188R60J475KE19D
.......7 C1045 CCUS0J475KC CAP, CHIP(1608, 6.3V/4.7uF, MURATA GRM18) GRM188R60J475KE19D
.......7 C1046 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1047 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1048 CCUS0J475KC CAP, CHIP(1608, 6.3V/4.7uF, MURATA GRM18) GRM188R60J475KE19D
.......7 C1049 CCUS0J475KC CAP, CHIP(1608, 6.3V/4.7uF, MURATA GRM18) GRM188R60J475KE19D
.......7 C1050 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1051 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1052 CCUS0J475KC CAP, CHIP(1608, 6.3V/4.7uF, MURATA GRM18) GRM188R60J475KE19D
.......7 C1053 CCUS0J475KC CAP, CHIP(1608, 6.3V/4.7uF, MURATA GRM18) GRM188R60J475KE19D
.......7 C1054 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1061 CCUS1A105KC CAP, CHIP(1608, 10V/1uF)
.......7 C1062 CCUS1A105KC CAP, CHIP(1608, 10V/1uF)
.......7 C1063 CCUS1A105KC CAP, CHIP(1608, 10V/1uF)
.......7 C1064 CCUS1A105KC CAP, CHIP(1608, 10V/1uF)
.......7 C1068 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1069 CCUC0J106KC CAP, CHIP(2012, 6.3V/10uF, X7R) LAO-63V103MS56PW#
.......7 C1104 CCUI1H102KC CAP, CHIP(1005, 50V/1000pF) 0402B102K500HI
.......7 C1110 CCUI1H100JA CAP, CHIP(1005, 50V/10pF) 0402N100J500HI
.......7 C1112 CCUS0J475KC CAP, CHIP(1608, 6.3V/4.7uF, MURATA GRM18) GRM188R60J475KE19D
.......7 C1113 CCUS0J475KC CAP, CHIP(1608, 6.3V/4.7uF, MURATA GRM18) GRM188R60J475KE19D
.......7 C1114 CCUS0J475KC CAP, CHIP(1608, 6.3V/4.7uF, MURATA GRM18) GRM188R60J475KE19D
.......7 C1119 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1120 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1121 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1122 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1123 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1124 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1125 CCUI1C104KC CAP, CHIP(1005, 16V/0.1uF)
.......7 C1126 CCUI1H100JA CAP, CHIP(1005, 50V/10pF) 0402N100J500HI
.......7 C1127 CCUI1H100JA CAP, CHIP(1005, 50V/10pF) 0402N100J500HI
.......7 C1128 CCUI1H100JA CAP, CHIP(1005, 50V/10pF) 0402N100J500HI
.......7 C1129 CCUI1H100JA CAP, CHIP(1005, 50V/10pF) 0402N100J500HI
.......7 C1130 CCUS0J475KC CAP, CHIP(1608, 6.3V/4.7uF, MURATA GRM18) GRM188R60J475KE19D
.......7 C1131 CCUI1H100JA CAP, CHIP(1005, 50V/10pF) 0402N100J500HI
.......7 C1132 CCUI1H100JA CAP, CHIP(1005, 50V/10pF) 0402N100J500HI
.......7 C1133 CCUS0J475KC CAP, CHIP(1608, 6.3V/4.7uF, MURATA GRM18) GRM188R60J475KE19D
.......7 C1134 CCUS0J475KC CAP, CHIP(1608, 6.3V/4.7uF, MURATA GRM18) GRM188R60J475KE19D
.......7 C1135 CCUS0J475KC CAP, CHIP(1608, 6.3V/4.7uF, MURATA GRM18) GRM188R60J475KE19D
Harman Kardon
AVR 171 Service Manual
Page 20 of 174