Harman Spark User manual

Welcome to
QUICK START GUIDE
Create your account
Register your device
Plug in the device
Start your vehicle (stay parked)
Go to the App Store®or Google Play™on
your smartphone to download the HARMAN
Spark app.
The OBD-II port in your vehicle (in the shape shown below left) is
usually located under the dashboard of the driver’s seat. If you cannot
find it, check other locations highlighted in the image below right.
You can also refer to your vehicle owner's manual.
Congratulations on successfully activating
your HARMAN Spark device!
You can now start using HARMAN Spark
features in the app on your smartphone.
The HARMAN Spark device can take up to 5 minutes for initial activation.
If the device does not activate within 5 minutes, please drive the vehicle
for 15 minutes to complete the activation.
You will know your device has been activated when the 4G LTE/3G LED
light on the device turns solid green and the mobile app indicates
successful activation.
Launch the app, tap on “Sign Up” button and
enter the required information to create
your account.
If you already have an account tap on
“Sign In” button.
Using the HARMAN Spark app, scan the QR
code that is printed on the device to register
it. Alternatively, you can manually input the
IMEI number which is printed on the back of
the device and the box your HARMAN Spark
came in.
A rate plan is required for your HARMAN
Spark. If you have not already signed up for
one, go to att.com/activate.
Before continuing, make sure your vehicle is parked
If HARMAN Spark is used outside of a vehicle, it is in violation of the Terms and
Conditions, and service may be discontinued.
safely in an area with AT&T network coverage.
Download the HARMAN Spark app
This guide is applicable only for Spark experience. For AT&T Fleet Solution customers,
please visit https://www.welcometoattfleetcomplete.com/ to complete registration.
This guide is applicable only for Spark experience. For AT&T Fleet Solution
customers, please visit https://www.welcometoattfleetcomplete.com/
to complete registration.

Welcome to
QUICK START GUIDE
Create your account
Register your device
Plug in the device
Start your vehicle (stay parked)
Go to the App Store®or Google Play™on
your smartphone to download the HARMAN
Spark app.
The OBD-II port in your vehicle (in the shape shown below left) is
usually located under the dashboard of the driver’s seat. If you cannot
find it, check other locations highlighted in the image below right.
You can also refer to your vehicle owner's manual.
Congratulations on successfully activating
your HARMAN Spark device!
You can now start using HARMAN Spark
features in the app on your smartphone.
The HARMAN Spark device can take up to 5 minutes for initial activation.
If the device does not activate within 5 minutes, please drive the vehicle
for 15 minutes to complete the activation.
You will know your device has been activated when the 4G LTE/3G LED
light on the device turns solid green and the mobile app indicates
successful activation.
Launch the app, tap on “Sign Up” button and
enter the required information to create
your account.
If you already have an account tap on
“Sign In” button.
Using the HARMAN Spark app, scan the QR
code that is printed on the device to register
it. Alternatively, you can manually input the
IMEI number which is printed on the back of
the device and the box your HARMAN Spark
came in.
A rate plan is required for your HARMAN
Spark. If you have not already signed up for
one, go to att.com/activate.
Before continuing, make sure your vehicle is parked
If HARMAN Spark is used outside of a vehicle, it is in violation of the Terms and
Conditions, and service may be discontinued.
safely in an area with AT&T network coverage.
Download the HARMAN Spark app
This guide is applicable only for Spark experience. For AT&T Fleet Solution customers,
please visit https://www.welcometoattfleetcomplete.com/ to complete registration.
This guide is applicable only for Spark experience. For AT&T Fleet Solution
customers, please visit https://www.welcometoattfleetcomplete.com/
to complete registration.

Welcome to
QUICK START GUIDE
Create your account
Register your device
Plug in the device
Start your vehicle (stay parked)
Go to the App Store®or Google Play™on
your smartphone to download the HARMAN
Spark app.
The OBD-II port in your vehicle (in the shape shown below left) is
usually located under the dashboard of the driver’s seat. If you cannot
find it, check other locations highlighted in the image below right.
You can also refer to your vehicle owner's manual.
Congratulations on successfully activating
your HARMAN Spark device!
You can now start using HARMAN Spark
features in the app on your smartphone.
The HARMAN Spark device can take up to 5 minutes for initial activation.
If the device does not activate within 5 minutes, please drive the vehicle
for 15 minutes to complete the activation.
You will know your device has been activated when the 4G LTE/3G LED
light on the device turns solid green and the mobile app indicates
successful activation.
Launch the app, tap on “Sign Up” button and
enter the required information to create
your account.
If you already have an account tap on
“Sign In” button.
Using the HARMAN Spark app, scan the QR
code that is printed on the device to register
it. Alternatively, you can manually input the
IMEI number which is printed on the back of
the device and the box your HARMAN Spark
came in.
A rate plan is required for your HARMAN
Spark. If you have not already signed up for
one, go to att.com/activate.
Before continuing, make sure your vehicle is parked
If HARMAN Spark is used outside of a vehicle, it is in violation of the Terms and
Conditions, and service may be discontinued.
safely in an area with AT&T network coverage.
Download the HARMAN Spark app
This guide is applicable only for Spark experience. For AT&T Fleet Solution customers,
please visit https://www.welcometoattfleetcomplete.com/ to complete registration.
This guide is applicable only for Spark experience. For AT&T Fleet Solution
customers, please visit https://www.welcometoattfleetcomplete.com/
to complete registration.

Welcome to
QUICK START GUIDE
Create your account
Register your device
Plug in the device
Start your vehicle (stay parked)
Go to the App Store®or Google Play™on
your smartphone to download the HARMAN
Spark app.
The OBD-II port in your vehicle (in the shape shown below left) is
usually located under the dashboard of the driver’s seat. If you cannot
find it, check other locations highlighted in the image below right.
You can also refer to your vehicle owner's manual.
Congratulations on successfully activating
your HARMAN Spark device!
You can now start using HARMAN Spark
features in the app on your smartphone.
The HARMAN Spark device can take up to 5 minutes for initial activation.
If the device does not activate within 5 minutes, please drive the vehicle
for 15 minutes to complete the activation.
You will know your device has been activated when the 4G LTE/3G LED
light on the device turns solid green and the mobile app indicates
successful activation.
Launch the app, tap on “Sign Up” button and
enter the required information to create
your account.
If you already have an account tap on
“Sign In” button.
Using the HARMAN Spark app, scan the QR
code that is printed on the device to register
it. Alternatively, you can manually input the
IMEI number which is printed on the back of
the device and the box your HARMAN Spark
came in.
A rate plan is required for your HARMAN
Spark. If you have not already signed up for
one, go to att.com/activate.
Before continuing, make sure your vehicle is parked
If HARMAN Spark is used outside of a vehicle, it is in violation of the Terms and
Conditions, and service may be discontinued.
safely in an area with AT&T network coverage.
Download the HARMAN Spark app
This guide is applicable only for Spark experience. For AT&T Fleet Solution customers,
please visit https://www.welcometoattfleetcomplete.com/ to complete registration.
This guide is applicable only for Spark experience. For AT&T Fleet Solution
customers, please visit https://www.welcometoattfleetcomplete.com/
to complete registration.

©2018 HARMAN International.
All rights reserved.
HARMAN Spark App
Key features
Wi-Fi Hotspot
Connect up to 8 devices to the powerful Wi-Fi hotspot built into your
HARMAN Spark device and keep your passengers happy.
Note:
Default Wi-Fi hotspot credentials can be found under “WiFi Hotspot Settings”
of the HARMAN Spark app upon registering the device. Customer needs to
change the Wi-Fi password immediately after installation via the Spark app
to avoid unauthorized data usage.
Vehicle Tracking
View real-time location of your vehicle, receive notifications for towing
and parking disturbances.
Boundaries
Set boundaries on a map and receive updates on vehicle location.
Virtual Mechanic
Vehicle diagnostics for your safety and peace of mind.
Driving Score
Receive feedback on how to improve your driving.
Impact Detection
Send a notification if an impact is detected.
Trips
Record your daily trip history and events.
Fleet Service
Track status of multiple vehicles.
Warranty
The device warranty is one year from the date of purchase. Any
abnormal or unauthorized usage of the product, damage due to contact
with liquids or exposure to excessive heat can void the warranty.
Note: Device for in-vehicle use only. Eligible vehicle and AT&T rate plan required to
use features, including Wi-Fi hotspot.
Support
For customer care information, please go to att.com/harmanspark
or call +1-833-US-SPARK/[phone]
Regulatory Requirement
HARMAN Spark device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions: (1)The device
may not cause harmful interference, and (2)The device must accept
any interference received, including interference that may cause
undesired operation.
Caution: Changes or modifications not expressly approved by
HARMAN could void warranty and the user’s authority to operate the
equipment.
.
FCC Radiation Exposure Statement
This equipment should be installed and operated with a minimum
distance of 5 mm between the device and your body.








HARMAN Spark Indicators
Wi-Fi
GPS
The side with
Spark logo
4G LTE/3G
Connectivity
How do you know it is working?
Once the device is activated, you can check
its status lights for network connectivity and
other information.
GPS
LED off – Sleep Mode, GPS Inactive
Blinking Blue – GPS Lock in Progress
Solid Blue – GPS Lock Successful
Wi-Fi
LED off
Blinking Blue – Wi-Fi On
4G LTE/3G Connectivity
LED off
Blinking Red – Network connection in
progress
Solid Green – Network connection
successful
NOTE: Depending upon the location of your
OBD-II port, it may be difficult to see the LEDs
when the device is plugged in. In that case, try
to use a small mirror (not included) or use
your smartphone camera pointed at the device
in selfie mode to see the lights.
HARMAN Spark Operational States
Normal
When the vehicle engine is on, the device is active and all features are
enabled. In-vehicleWi-Fi is enabled if the service is activated. After the
Note:Wi-Fi is turned off automatically after the vehicle has been stationary for
30 minutes, even if the engine is on.
Sleep
Device is in a power saving mode. Wireless connectivity is not
active in this mode, but the device is still operational and can
detect any unexpected vehicle movements like bumping or towing.The
device will return to Normal mode only when ignition is turned
back on.
Shutdown
If the vehicle battery becomes weak, the device will send an alert to the
HARMAN Spark app and the device will automatically shut down.
Device will return to Normal mode only when ignition is turned back on
and the vehicle battery charges to a sucient level.
To learn more, go to att.com/harmanspark QSG Part Number - 4018310
App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc.
Warning: This product can expose you to chemicals including Lead,
which is known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov.
Solid Blue – Low signal

RESET Button

©2018 HARMAN International.
All rights reserved.
HARMAN Spark App
Key features
Wi-Fi Hotspot
Connect up to 8 devices to the powerful Wi-Fi hotspot built into your
HARMAN Spark device and keep your passengers happy.
Note:
Default Wi-Fi hotspot credentials can be found under “WiFi Hotspot Settings”
of the HARMAN Spark app upon registering the device. Customer needs to
change the Wi-Fi password immediately after installation via the Spark app
to avoid unauthorized data usage.
Vehicle Tracking
View real-time location of your vehicle, receive notifications for towing
and parking disturbances.
Boundaries
Set boundaries on a map and receive updates on vehicle location.
Virtual Mechanic
Vehicle diagnostics for your safety and peace of mind.
Driving Score
Receive feedback on how to improve your driving.
Impact Detection
Send a notification if an impact is detected.
Trips
Record your daily trip history and events.
Fleet Service
Track status of multiple vehicles.
Warranty
The device warranty is one year from the date of purchase. Any
abnormal or unauthorized usage of the product, damage due to contact
with liquids or exposure to excessive heat can void the warranty.
Note: Device for in-vehicle use only. Eligible vehicle and AT&T rate plan required to
use features, including Wi-Fi hotspot.
Support
For customer care information, please go to att.com/harmanspark
or call +1-833-US-SPARK/[phone]
Regulatory Requirement
HARMAN Spark device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions: (1) The device
may not cause harmful interference, and (2)The device must accept
any interference received, including interference that may cause
undesired operation.
Caution: Changes or modifications not expressly approved by
HARMAN could void warranty and the user’s authority to operate the
equipment.
.
FCC Radiation Exposure Statement
This equipment should be installed and operated with a minimum
distance of 5 mm between the device and your body.








HARMAN Spark Indicators
Wi-Fi
GPS
The side with
Spark logo
4G LTE/3G
Connectivity
How do you know it is working?
Once the device is activated, you can check
its status lights for network connectivity and
other information.
GPS
LED off – Sleep Mode, GPS Inactive
Blinking Blue – GPS Lock in Progress
Solid Blue – GPS Lock Successful
Wi-Fi
LED off
Blinking Blue – Wi-Fi On
4G LTE/3G Connectivity
LED off
Blinking Red – Network connection in
progress
Solid Green – Network connection
successful
NOTE: Depending upon the location of your
OBD-II port, it may be difficult to see the LEDs
when the device is plugged in. In that case, try
to use a small mirror (not included) or use
your smartphone camera pointed at the device
in selfie mode to see the lights.
HARMAN Spark Operational States
Normal
When the vehicle engine is on, the device is active and all features are
enabled. In-vehicleWi-Fi is enabled if the service is activated. After the
Note:Wi-Fi is turned off automatically after the vehicle has been stationary for
30 minutes, even if the engine is on.
Sleep
Device is in a power saving mode. Wireless connectivity is not
active in this mode, but the device is still operational and can
detect any unexpected vehicle movements like bumping or towing.The
device will return to Normal mode only when ignition is turned
back on.
Shutdown
If the vehicle battery becomes weak, the device will send an alert to the
HARMAN Spark app and the device will automatically shut down.
Device will return to Normal mode only when ignition is turned back on
and the vehicle battery charges to a sucient level.
To learn more, go to att.com/harmanspark QSG Part Number - 4018310
App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc.
Warning: This product can expose you to chemicals including Lead,
which is known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov.
Solid Blue – Low signal

RESET Button

©2018 HARMAN International.
All rights reserved.
HARMAN Spark App
Key features
Wi-Fi Hotspot
Connect up to 8 devices to the powerful Wi-Fi hotspot built into your
HARMAN Spark device and keep your passengers happy.
Note:
Default Wi-Fi hotspot credentials can be found under “WiFi Hotspot Settings”
of the HARMAN Spark app upon registering the device. Customer needs to
change the Wi-Fi password immediately after installation via the Spark app
to avoid unauthorized data usage.
Vehicle Tracking
View real-time location of your vehicle, receive notifications for towing
and parking disturbances.
Boundaries
Set boundaries on a map and receive updates on vehicle location.
Virtual Mechanic
Vehicle diagnostics for your safety and peace of mind.
Driving Score
Receive feedback on how to improve your driving.
Impact Detection
Send a notification if an impact is detected.
Trips
Record your daily trip history and events.
Fleet Service
Track status of multiple vehicles.
Warranty
The device warranty is one year from the date of purchase. Any
abnormal or unauthorized usage of the product, damage due to contact
with liquids or exposure to excessive heat can void the warranty.
Note: Device for in-vehicle use only. Eligible vehicle and AT&T rate plan required to
use features, including Wi-Fi hotspot.
Support
For customer care information, please go to att.com/harmanspark
or call +1-833-US-SPARK/[phone]
Regulatory Requirement
HARMAN Spark device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions: (1)The device
may not cause harmful interference, and (2) The device must accept
any interference received, including interference that may cause
undesired operation.
Caution: Changes or modifications not expressly approved by
HARMAN could void warranty and the user’s authority to operate the
equipment.
.
FCC Radiation Exposure Statement
This equipment should be installed and operated with a minimum
distance of 5 mm between the device and your body.








HARMAN Spark Indicators
Wi-Fi
GPS
The side with
Spark logo
4G LTE/3G
Connectivity
How do you know it is working?
Once the device is activated, you can check
its status lights for network connectivity and
other information.
GPS
LED off – Sleep Mode, GPS Inactive
Blinking Blue – GPS Lock in Progress
Solid Blue – GPS Lock Successful
Wi-Fi
LED off
Blinking Blue – Wi-Fi On
4G LTE/3G Connectivity
LED off
Blinking Red – Network connection in
progress
Solid Green – Network connection
successful
NOTE: Depending upon the location of your
OBD-II port, it may be difficult to see the LEDs
when the device is plugged in. In that case, try
to use a small mirror (not included) or use
your smartphone camera pointed at the device
in selfie mode to see the lights.
HARMAN Spark Operational States
Normal
When the vehicle engine is on, the device is active and all features are
enabled. In-vehicleWi-Fi is enabled if the service is activated. After the
Note:Wi-Fi is turned off automatically after the vehicle has been stationary for
30 minutes, even if the engine is on.
Sleep
Device is in a power saving mode. Wireless connectivity is not
active in this mode, but the device is still operational and can
detect any unexpected vehicle movements like bumping or towing.The
device will return to Normal mode only when ignition is turned
back on.
Shutdown
If the vehicle battery becomes weak, the device will send an alert to the
HARMAN Spark app and the device will automatically shut down.
Device will return to Normal mode only when ignition is turned back on
and the vehicle battery charges to a sucient level.
To learn more, go to att.com/harmanspark QSG Part Number - 4018310
App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc.
Warning: This product can expose you to chemicals including Lead,
which is known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov.
Solid Blue – Low signal

RESET Button

©2018 HARMAN International.
All rights reserved.
HARMAN Spark App
Key features
Wi-Fi Hotspot
Connect up to 8 devices to the powerful Wi-Fi hotspot built into your
HARMAN Spark device and keep your passengers happy.
Note:
Default Wi-Fi hotspot credentials can be found under “WiFi Hotspot Settings”
of the HARMAN Spark app upon registering the device. Customer needs to
change the Wi-Fi password immediately after installation via the Spark app
to avoid unauthorized data usage.
Vehicle Tracking
View real-time location of your vehicle, receive notifications for towing
and parking disturbances.
Boundaries
Set boundaries on a map and receive updates on vehicle location.
Virtual Mechanic
Vehicle diagnostics for your safety and peace of mind.
Driving Score
Receive feedback on how to improve your driving.
Impact Detection
Send a notification if an impact is detected.
Trips
Record your daily trip history and events.
Fleet Service
Track status of multiple vehicles.
Warranty
The device warranty is one year from the date of purchase. Any
abnormal or unauthorized usage of the product, damage due to contact
with liquids or exposure to excessive heat can void the warranty.
Note: Device for in-vehicle use only. Eligible vehicle and AT&T rate plan required to
use features, including Wi-Fi hotspot.
Support
For customer care information, please go to att.com/harmanspark
or call +1-833-US-SPARK/[phone]
Regulatory Requirement
HARMAN Spark device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions: (1)The device
may not cause harmful interference, and (2) The device must accept
any interference received, including interference that may cause
undesired operation.
Caution: Changes or modifications not expressly approved by
HARMAN could void warranty and the user’s authority to operate the
equipment.
.
FCC Radiation Exposure Statement
This equipment should be installed and operated with a minimum
distance of 5 mm between the device and your body.








HARMAN Spark Indicators
Wi-Fi
GPS
The side with
Spark logo
4G LTE/3G
Connectivity
How do you know it is working?
Once the device is activated, you can check
its status lights for network connectivity and
other information.
GPS
LED off – Sleep Mode, GPS Inactive
Blinking Blue – GPS Lock in Progress
Solid Blue – GPS Lock Successful
Wi-Fi
LED off
Blinking Blue – Wi-Fi On
4G LTE/3G Connectivity
LED off
Blinking Red – Network connection in
progress
Solid Green – Network connection
successful
NOTE: Depending upon the location of your
OBD-II port, it may be difficult to see the LEDs
when the device is plugged in. In that case, try
to use a small mirror (not included) or use
your smartphone camera pointed at the device
in selfie mode to see the lights.
HARMAN Spark Operational States
Normal
When the vehicle engine is on, the device is active and all features are
enabled. In-vehicle Wi-Fi is enabled if the service is activated. After the
Note:Wi-Fi is turned off automatically after the vehicle has been stationary for
30 minutes, even if the engine is on.
Sleep
Device is in a power saving mode. Wireless connectivity is not
active in this mode, but the device is still operational and can
detect any unexpected vehicle movements like bumping or towing.The
device will return to Normal mode only when ignition is turned
back on.
Shutdown
If the vehicle battery becomes weak, the device will send an alert to the
HARMAN Spark app and the device will automatically shut down.
Device will return to Normal mode only when ignition is turned back on
and the vehicle battery charges to a sucient level.
To learn more, go to att.com/harmanspark QSG Part Number - 4018310
App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc.
Warning: This product can expose you to chemicals including Lead,
which is known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov.
Solid Blue – Low signal

RESET Button