Harman JBL CPi2000 User manual
Service Manual
CPi2000
Cinema Processor
Version A - 01/19
1
SAFETY INSTRUCTIONS
For your own safety and to avoid invalidation of the warranty please read this section carefully.
IMPORTANT SYMBOLS
Caution
Alerts the user to the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
Warning
Alerts the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of electric shock to persons.
Protect your ears
Alerts the user that the product is capability to produce sound which, when monitored through an amplifier
or headphones, can damage hearing over time.
SAFETY INSTRUCTIONS
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Clean the apparatus only with a dry cloth.
• Do not install near any heat sources such as radiators, heat resistors, stoves, or other apparatus (including
amplifiers) that produce heat.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not use this apparatus near water.
• Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and
the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
CPi2000 Service Manual
Version A - 01/19
3
Table of Contents
damaged in any way such as power-supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When the cart is used, use caution when moving the cart/apparatus combination to avoid injury
from tip-over.
• No naked flame sources, such as lighted candles or cigarettes etc., should be placed on the apparatus.
• No user serviceable parts. Refer all servicing to a qualified service engineer, through the appropriate JBL
dealer.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
THIS UNIT MUST BE EARTHED. Under no circumstances should the mains earth be disconnected from
the mains lead.
All maintenance and service on the product should be carried out by JBL or its authorized agents.
JBL cannot accept any liability whatsoever for any loss or damage caused by service, maintenance or
repair by unauthorized personnel.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Do not expose the apparatus to d ripping or splashing and do not place objects filled with liquids, such
as vases, on the apparatus. No naked flame sources, such as lighted candles, should be placed on the
apparatus.
Ventilation should not be impeded by covering the ventilation openings with items such as
newspapers, table cloths, curtains etc.
CPi2000 Service Manual
Version A - 01/19
4
Table of Contents
CPi2000
CINEMA PROCESSOR
www.jblpro.com
CPi2000 is a professional-grade processor developed by JBL to provide audio enhancement and volume control
for cinemas. It features DSP processing, room EQ tuning, volume control and system fault detection and can be
configured through a tailor-designed GUI software.
CPi2000 offers four input options – Analog Input, Digital Input, Non-Sync Input and mono Mic Input. The Analog
Input and Digital Input accept audio signal from any cinema server. Non-Sync Input receives line level stereo
signal from a CD or DVD player for background music playback. Mic Input normally connects to a RTA microphone
for room tuning.
CPi2000 installs ten (10) HD-15 Analog Output connectors for passive, bi-amp or tri-amp connection and a 25-
pin Analog Output connector for connection with a third-party audio system. Its Redundant Output (work together
with Analog Input) connector will bypass the CPi2000 system and directly output audio signals while power failure
occurs.
The large LCD display on the front panel is easy for
technicians to run a quick check of system status. To
make global output volume control easy and quick, the
volume knob is designed front accessible. Thanks to
the specially-designed GUI software, setting up cinema
audio system now becomes less demanding.
CPi2000 provides a 1/3 octave GEQ for room tuning
via the GUI software and is built-in with a list of variable
crossover presets to accept a wide range of cinema
speakers.
Designed to use with CROWN cinema amplifiers and
JBL cinema speakers, CPi2000 is able to detect faults
of amplifiers or speakers and send the fault information
to a TMS or a 3rd party control system via its RJ45 connector.
Built-in Crossover
Converts up to 7.1 channel audio to passive, bi-
amp or tri-amp
Supports TMS Communication
Convenient for remote control and saves system
operation cost
JBL Cinema Speaker Presets
Reduces tuning time
Specifically-designed GUI Software
Makes operation intuitive and simple
Large LCD Display
System status at one glance
USB Connector
For preset file import and export
DESCRIPTIONS
HIGHTLIGHTS
GUI software
CPi2000 Service Manual
Version A - 01/19
5
Table of Contents
CPi2000
CINEMA PROCESSOR
www.jblpro.com
REAR PANEL CONTROLS
FRONT PANEL CONTROLS
•LCD Display: The display is 320x160 pixels. When the
unit is powered on, the home screen shows the hall
name, IP address and the global output volume.
•Menu Button: By pressing the button, the LCD display
will navigate to the menu section. Using the Volume/Edit
Encoder, the following parameters can be checked or
edited: INPUT LEVEL, OUTPUT LEVEL, IP ADDRESS,
5.1/7.1 INPUT, FAULT DETECTION, USB IMPORT/
EXPORT, etc.
•Analog Input Button: Press the button to choose signal
from the Analog Input Connector.
•Mic Input Button: Press the button to choose signal
from the Mic Input Connector.
•Digital Input Button: Press the button to choose signal
from the Digital Input Connector.
•Music (Non-Sync) Input Button: Press the button to
choose signal from the Music (Non-Sync) Input.
•Power Button: Press the button to switch on or off the
unit.
•Mute Button: Press the button to mute or unmute the
global output.
•Volume/Edit Encoder: Supports long-press, short-
press and rotating actions and can be used to unlock
front panel controls, set the global output volume, and
navigate through menu screens or edit parameters.
•AC Power Input: Accepts mains power of 100-240 VAC,
50-60Hz, 20W.
•Mic Input: Uses a XLR connector to accept balanced or
unbalanced signal with adjustable gain of -fdB - 40 dB.
+12V phantom power is available. It normally connects to
a RTA microphone for room tuning.
•Music (Non-Sync) Input: Uses RCA L-R connectors to
accept stereo signal from a CD or DVD player.
•Digital Input: Uses a female HD-25 connector to
connect a cinema server. This input supports up to
7.1-channel audio input and accommodates PCM audio
at 96, 48, 44.1 kHz and 32 kHz (16, 20 and 24 bits) and
Dolby Digital at all data rates and sample rates.
•Analog Input: Uses a female HD-25 connector to
accept 8 channels of signals and is designed to receive
300mVRMS (ref) inputs from external sources.
•USB Connector: Type-A USB connector and can be
used for preset saving or loading.
•Redundant Output: Installs a male HD-25 connector
which will bypass the CPi2000 system and directly output
audio signals when power failure occures. It must work
together with Analog Input.
•LAN Port: Uses a RJ45 connector with activity LEDs.
Can be used for TMS (heatre Management System)
communication, GUI software operation and firmware
upgrade.
•Analog Output 1: The 8-channel output uses a male
HD-25 connector and is compatible with third party audio
systems.
•Backup DC Power Input: Uses a 4-pin female XLR
connector to connect a +12V 2A DC power adapter (sold
separately).
•Analog Output 2: Includes ten male HD-15 connectors
(Left 1, L/R 2, Center 1, Center 2, Right 1, LS/RS 1, LR/
RS 2, BLS/BRS, SW 1, SW 2) and connects to CROWN
cinema amplifiers for analog audio output and fault
detection signal input.
CPi2000 Service Manual
Version A - 01/19
6
Table of Contents
CPi2000
CINEMA PROCESSOR
www.jblpro.com
JBL 4181
100-240V 50/60Hz CD/DVD Player
Cinema Server Control PC
+12VDC 2A
（Optional）
CROWN
XLC2500
JBL 3252
XLC
2500
FAULT
CLIP
SIGNAL
CH2
CH1
CROWN
XLC2500
JBL 3252
XLC
2500
FAULT
CLIP
SIGNAL
CH2
CH1
CROWN
XLC2500
JBL 3252
XLC
2500
FAULT
CLIP
SIGNAL
CH2
CH1
CROWN
XLC2800
CROWN
XLC2500
XLC
2500
FAULT
CLIP
SIGNAL
CH2
CH1
JBL 9400 JBL 9400
XLC
2800
FAULT
CLIP
SIGNAL
CH2
CH 1
RTA Microphone
APPLICATION EXAMPLE
CPi2000 Service Manual
Version A - 01/19
7
Table of Contents
Table of Contents
CPi2000
CINEMA PROCESSOR
www.jblpro.com
INPUT
Digital Input
Connector Female HD-25 Balanced
Impedance 110 Ohms
Input level 0.5 - 10 Vpp
Analog Input
Connector Female HD-25 Balanced or Unbalanced
Impedance 50K Ohms (Balanced) or 25K Ohms (Unbalanced)
Max. input level +14.2 dBu
Mic Input
Connector Female XLR Balanced or Unbalanced
Impedance 660 Ohms (Balanced) or 330 Ohms (Unbalanced)
Total gain 40 dB
E.I.N. >113dB, 20K Hz Bandwidth
Music (Non-Sync)
Input
Connector RCA
Impedance 25K Ohms
Max. input level +14.2 dBu
OUTPUT
Analog Output 1 &
Redundant Output
Connector Male HD-25 Balanced or Unbalanced
Impedance 30 Ohms (Balanced) or 15 Ohms (Unbalanced)
Max. level +14.2 dBu
Frequency response 20 Hz - 20K Hz, Ref 1K Hz +/-1dB
THD + N <0.01%, 20 Hz - 20K Hz
Dynamic range >102 dB
Analog Output 2
Connector 10 x Female HD-15 Balanced or Unbalanced
Impedance 30 Ohms (Balanced) or 15 Ohms (Unbalanced)
Max. level +14.2 dBu
Frequency response 20 Hz - 20K Hz, Ref 1K Hz +/-1dB
THD + N <0.01%, 20 Hz - 20K Hz
Dynamic range >102 dB
POWER
AC Power Input 100-240VAC, 50-60Hz
DC Power Input +12VDC, 2A
GENERAL
Rack space 2U
Dimensions (W x H x D) 482 x 88 x 231 mm
Net Weight 4.0 kg
Shipping Weight 5.6 kg
© 2017 HARMAN International Industries, Incorporated. All rights reserved. JBL is a trademark of HARMAN International harmanpro, registered in the United States and /
or other countries. Features, specifications and appearance are subject to change without notice.
HARMAN PROFESSIONAL CHINA
Add.:!Rm. 3004, Chong Hing Finance Center, #288, West Nanjing Road, Shanghai
Website: www.harmanpro.com.cn
Tel.: 021-2306 0000
SPECIFICATIONS
Webchat Website
CPi2000 Service Manual
Version A - 01/19
8
Table of Contents
&
!$
"
%
%&
&
&
&
&
#%%
&
&
Board Layouts
CPi2000 Service Manual
Version A - 01/19
9
Table of Contents
•
" ■
�
PCB T NO:
5e69499
----------------
• ••
Vick� Gan 12-20-2017
CPi2000 Service Manual
Version A - 01/19
10
Table of Contents
1
D
C
B
A
234
REV BY APVDCHKDDATE DESCRIPTION
REVISION HISTORY
CAUTION:
DRAWN BY
ENGINEER
DATE
SCALE
ASY/SCH PART NO. REV
SHEET
SIZE
B
NONE
SEE CHANGE NOTICE FOR HISTORY
PCB SCH,
HARMAN
DATE
SHEET NAME
SCH DOC NO. PCB PART NO.
CONTAINS PARTS AND ASSEMBLIES
SUSCEPTIBLE TO DAMAGE BY
ELECTROSTATIC DISCHARGE (ESD).
PROPRIETARY AND CONFIDENTIAL PROPERTY OF
HARMAN. DO NOT DISCLOSE, REPRODUCE, OR
PUBLISH WITHOUT APPROVAL.
RoHS
RESTRICTION OF HAZARDOUS SUBSTANCES
ALL MATERIALS USED IN THIS PART MUST BE
RoHS COMPLIANT.
SUPPLIER SHALL PROVIDE A CERTIFICATE OF
RoHS COMPLIANCE WITH THE FIRST ARTICLE.
TITLE
REVISE STAMP
-
Log Li 20DEC2017 F
20/12/2017:13:57
1_TITLE_PAGE
20DEC2017 PCB,ASY,CPi2000,AV1
5069499
Log Li
1000237999
5069500
PAGE 2
TITLE PAGE
PAGE 1 PAGE 3 PAGE 8
PAGE 11PAGE 10 PAGE 12
PAGE 5 PAGE 9PAGE 6
PAGE 15 PAGE 18PAGE 17
PAGE 19
PAGE 16PAGE 14
PAGE 7
ANALOG_INPUT
DB25_OUTPUT
L/R CODEC C/SW CODEC BLS/BRS CODEC LEFT1 OUTPUT
LEFT2 OUTPUT CENTER2 OUTPUT SW1/2 OUTPUT
POWER SUPPLY
CPi2000
11 111
FID2 FID4 FID5FID1 FID6
FID8
FID7
FID9
LABEL BARCODE
LBL1
PCB,RAW,CPi2000,BDB
PCB1
MH4
MP300H156
MH3
MP300H156 MP300H156
MH6
1
MH5
MP300H156
MP300H156
MH2
MP300H156
MH1
Main Board Tooling Holes
1
MH15
MP300H156
1
MP300H156
MH16
MP300H156
MH17
1
AGND_S
AGND
RTC_INTERFACEBLS/BRS OUTPUT
FAULT DETECT
RIGHT1 OUTPUTCENTER1 OUTPUT
AGND AGND
1 of 19
SWITCH
AGND_S
MP300H156
MH18
1
MP300H156
MH19
1
ANALOG_GAIN
PAGE 4
LS/RS CODEC
PAGE 13
LS/RS1 OUTPUT LS/RS2 OUTPUT
Small Board Tooling Holes SW Board Tooling Holes
AI Fiducials Xray Fiducials
AGND_S
AGND AGND AGND
Schematics
CPi2000 Service Manual
Version A - 01/19
11
Table of Contents
1
D
C
B
A
234
SCALE
ASY/SCH PART NO. REV
SHEET
SIZE
B
NONE
SCH DOC NO. PCB PART NO.
SHEET NAME REVISE STAMP
F
2_S_ANALOG_INPUT
5069499
20/12/2017:13:57
5069500
1000237999
1 2
1 2
1 2
1 2
1 2
1 2
1 2
1 2
1 2
1 2
1 2
1 2
1 2
1 2
1 2
1 2
R+_IN
L-_IN
L+_IN
BLS-_IN
C+_IN
BRS-_IN
LS-_IN
RS-_IN
SW-_IN
BLS+_IN
C-_IN
BRS+_IN
R-_IN
LS+_IN
RS+_IN
SW+_IN
L-_IN
L+_IN
L-_RELAY_IN
L+_RELAY_IN
R-_IN
R+_IN
R-_RELAY_IN
R+_RELAY_IN
C-_IN
C+_IN
C-_RELAY_IN
C+_RELAY_IN
L-_RELAY_IN
L+_RELAY_IN
R-_RELAY_IN
R+_RELAY_IN
C-_RELAY_IN
C+_RELAY_INL+_IN
L-_IN
R+_IN
R-_IN
C+_IN
C-_IN
SW-_IN
SW+_IN
SW-_RELAY_IN
SW+_RELAY_IN
SW-_RELAY_IN
SW+_RELAY_INSW+_IN
SW-_IN
LS-_IN
LS+_IN
LS-_RELAY_IN
LS+_RELAY_IN
LS-_RELAY_IN
LS+_RELAY_INLS+_IN
LS-_IN
RS-_IN
RS+_IN
RS-_RELAY_IN
RS+_RELAY_IN
RS-_RELAY_IN
RS+_RELAY_INRS+_IN
RS-_IN
BLS-_IN
BLS+_IN
BLS-_RELAY_IN
BLS+_RELAY_IN
BRS-_IN
BRS+_IN
BRS-_RELAY_IN
BRS+_RELAY_IN
BLS-_RELAY_IN
BLS+_RELAY_INBLS+_IN
BLS-_IN
BRS-_RELAY_IN
BRS+_RELAY_INBRS+_IN
BRS-_IN
ANALOG_CINEMA_INPUT
CLOSE TO SOCKET
CLOSE TO SOCKET
SG301
SPARK GAP SPARK GAP
SG302
SPARK GAP
SG401 SG402
SPARK GAP
SPARK GAP
SG501
SPARK GAP
SG502
SPARK GAP
SG601
SPARK GAP
SG602
SG701
SPARK GAP SPARK GAP
SG702
SPARK GAP
SG101
SPARK GAP
SG102
SPARK GAP
SG801 SG802
SPARK GAP
SG201
SPARK GAP SPARK GAP
SG202
2.5K
L103
L104 2.5K
L101 2.5K
2.5K
L102
L203 2.5K
2.5K
L204
2.5K
L201
L202 2.5K
2.5K
L803
L804 2.5K
2.5K
L801
2.5K
L802
L703 2.5K
2.5K
L704
L701 2.5K
L702 2.5K
2.5K
L603
L604 2.5K
L601 2.5K
2.5K
L602
L503 2.5K
2.5K
L504
2.5K
L501
2.5K
L502
L403 2.5K
L404 2.5K
L401 2.5K
2.5K
L402
L303 2.5K
L304 2.5K
L301 2.5K
2.5K
L302
26
13
25
12
24
11
23
10
22
9
21
8
20
7
19
6
18
5
17
4
16
3
15
2
14
1
27
J13
DR-B25SB-NJ-001
120pF
C101 C102
120pF 120pF
C103 C104
120pF
120pF
C201 C202
120pF
C203
120pF 120pF
C204
120pF
C301 C302
120pF 120pF
C303 C304
120pF
120pF
C401 C402
120pF
C403
120pF 120pF
C404
120pF
C501 C502
120pF 120pF
C503 C504
120pF
C601
120pF 120pF
C602 C603
120pF 120pF
C604
120pF
C701
120pF
C702
C801
120pF
C802
120pF 120pF
C803 C804
120pF
2 of 19
120pF
C925
C926
120pF
1 2
1 2
1 2
1 2
WHITE
GND
RED
SHLD_1
SHLD_2
MIC+_S
MIC-_S
NONSYNC_L_S
NONSYNC_R_S
SG5
SPARK GAP SPARK GAP
SG6
L43 2.5K
2.5K
L44
2.5K
L45
2.5K
L46
L47 2.5K2.5K
L48
2.5K
L49L50 2.5K
SPARK GAP
SG7 SG8
SPARK GAP
C392
120pF 120pF
C393 C394
120pF
C395
120pF
120pF
C396 C397
120pF 120pF
C398
120pF
C399
MIC+_IN
MIC-_IN
MIC+_S
MIC-_S
MIC_INPUT
ANALOG_LINE_INPUT
NONSYNC_L_S
NONSYNC_R_SNONSYNC_R_IN
NONSYNC_L_IN
2
1
3
4
5
LPA0860-32-23
J8
3
4
12
NC3FAAH2
P13
CLOSE TO SOCKET
AGND_S
AGND_S AGND_S AGND_S AGND_S AGND_S AGND_S
AGND_S AGND_S AGND_S AGND_S AGND_S AGND_S
AGND_S AGND_S AGND_S AGND_S AGND_SAGND_SAGND_S
AGND_S AGND_S AGND_S AGND_S AGND_S AGND_S
AGND_S
AGND_S AGND_S AGND_S AGND_S AGND_S AGND_S
AGND_S AGND_S AGND_S AGND_S AGND_S AGND_S
AGND_S AGND_S AGND_S AGND_S AGND_S AGND_S
AGND_S AGND_S AGND_S AGND_S AGND_S AGND_S
AGND_S AGND_S AGND_S AGND_S AGND_S AGND_S
AGND_S AGND_S AGND_S AGND_S AGND_S AGND_S
CPi2000 Service Manual
Version A - 01/19
12
Table of Contents
1
D
C
B
A
234
SCALE
ASY/SCH PART NO. REV
SHEET
SIZE
B
NONE
SCH DOC NO. PCB PART NO.
SHEET NAME REVISE STAMP
F
3_S_ANALOG_GAIN
5069499
5069500
1000237999
20/12/2017:13:57
++++++++
++ ++ ++ ++
L+_S
L-_S
R+_S
R-_S
C_L_IN_S
C_R_IN_S
C-_S
C+_S
SW-_S
SW+_S
C_IN_S
SW_IN_S
LS-_S
LS+_S
RS-_S
RS+_S
LS_IN_S
RS_IN_S
BLS-_S
BLS+_S
BRS-_S
BRS+_S
BLS_IN_S
BRS_IN_S
100K
R101 R102
100K
47uF
25V
C105
25V
47uF
C106
100K
R201 R202
100K
47uF
25V
C205
47uF
25V
C206
100K
R301 R302
100K
47uF
C305
25V
25V
47uF
C306
R401
100K 100K
R402
C405
47uF
25V
C406
25V
47uF
100K
R801 R802
100K
C805
47uF
25V
25V
47uF
C806
100K
R701 R702
100K
C705
47uF
25V
C706
25V
47uF
R601
100K
R602
100K
25V
47uF
C605
25V
47uF
C606
100K
R501 R502
100K
C505
25V
47uF
C506
47uF
25V
5
6
7
NJM4580CG
U7
5
6
7
U8
NJM4580CG
3
2
1
U9
NJM4580CG
5
6
7
U10
NJM4580CG
3
2
1
NJM4580CG
U8 3
2
1
NJM4580CG
U10
5
6
7
NJM4580CG
U9
3
2
1
NJM4580CG
U7
C_R_IN_S
L+_S
L-_S
C_L_IN_S
R+_S
R-_S
SW_IN_S
C-_S
C+_S
C_IN_S
SW-_S
SW+_S
RS_IN_S
LS-_S
LS+_S
LS_IN_S
RS-_S
RS+_S
BRS_IN_S
BLS-_S
BLS+_S
BLS_IN_S
BRS-_S
BRS+_S
CLOSE TO SOCKETCLOSE TO SOCKET
8
P
N
8
P
N
8
P
N
8
P
N
C276
0.1uF 0.1uF
C277
0.1uF
C278
C279
0.1uF
C280
0.1uF 0.1uF
C281
0.1uF
C282
0.1uF
C285
U7
NJM4580CG
4
88
4
U8
NJM4580CG
8
4
NJM4580CG
U9
4
8
U10
NJM4580CG
+12V_S
-12V_S
AGND_S AGND_S
AGND_S
3 of 19
AGND_S AGND_S
AGND_S
AGND_S AGND_S
AGND_S
AGND_S AGND_S
AGND_S
AGND_S AGND_S
AGND_S
AGND_S AGND_S
AGND_S
AGND_S AGND_S
AGND_S
AGND_S AGND_S
AGND_S
AGND_S AGND_S AGND_S
AGND_S
+12V_S
-12V_S
+12V_S
-12V_S
+12V_S
-12V_S
GND2
+
+
+
MIC-_S
MIC+_S
3
2
1
4
5GND1
10K
VR1 MIC_IN_S
100K
R187 R188
100K
C182
47uF
25V
R579 10K
R580 10K
R687
332
R688
332
0.1uF
C274 C275
0.1uF
R600 6.81K
R619 6.81K
R650 6.81K
R651 6.81K
R652 6.81K
R653 6.81K
R654 6.81K
R655 6.81K C573
10uF
16V
3
2
1
NJM4580CG
U12
5
6
7
U12
NJM4580CG
C453
120pF
120pF
C456
C457 120pF
C458 120pF
+12V_MIC
MIC-_S
MIC+_S
MIC GAIN CONTROL
CLOSE TO VR
CLOSE TO SOCKET
CLOSE TO MIC SIGNAL
MIC_IN_S
25V
47uF
C927
C928
47uF
25V
R577 6.81K
6.81K
R578
2K
R475
R476 2K
R597
00
R643
AGND_S
AGND_S AGND_S
AGND_S
+ +
NONSYNC_L_S
NONSYNC_L_IN_S
NONSYNC_R_S
NONSYNC_R_IN_S
100K
R185
24.9K
R598
R699
2.21K
R186
100K
24.9K
R599 4.02K
R696
2.21K
R700
5
6
7
U11
NJM4580CG
NJM4580CG
U11
2
1
3
120pF
C454
120pF
C455
NONSYNC_L_S
NONSYNC_R_S 25V
47uF
C929
C930
47uF
25V
4.02K
R1177
AGND_S AGND_S
AGND_S AGND_S
8
P
N
8
P
N
0.1uF
C283
0.1uF
C284
C286
0.1uF
C287
0.1uF
4
NJM4580CG
8
U11
4
8
U12
NJM4580CG
+12V_S
-12V_S
+12V_S
-12V_S
AGND_SAGND_S
PHANTUM POWER SWITCH
+12V_S
100K
R781
PHANTUM_PWR_N_S
Q65
FDN308P
Imax=14mA
2
3
1Q64
MMBT3904
+12V_MIC
10K
R646
10K
R669
AGND_S
CLOSE TO SOCKET
AGND_SAGND_S
AGND_S
19
24.9K
R103
R104
24.9K
R203
24.9K
R204
24.9K
24.9K
R303
24.9K
R304
R403
24.9K
R404
24.9K
24.9K
R803
24.9K
R804
R1157
24.9K
R704
24.9K
24.9K
R603
24.9K
R604
R1159
24.9K
R1158
24.9K
C107 120pF
C108 120pF
C207 120pF
C208 120pF
C307 120pF
C308 120pF
C407 120pF
C408 120pF
C807 120pF
C808 120pF
C707 120pF
C708 120pF
C507 120pF
C508 120pF
C607 120pF
C608 120pF
R106
2.21K4.02K
R105
2.21K
R108
R107
4.02K
2.21K
R206
R205
4.02K
R208
2.21K4.02K
R207
R306
2.21K4.02K
R305
2.21K
R308
R307
4.02K
2.21K
R406
R405
4.02K
R408
2.21K4.02K
R407
R1180
2.21K4.02K
R805
2.21K
R1179
R1174
4.02K
2.21K
R706
R705
4.02K
R1178
2.21K4.02K
R1163
R606
2.21K4.02K
R605
2.21K
R608
R607
4.02K
2.21K
R506
R505
4.02K
R508
2.21K4.02K
R507
CPi2000 Service Manual
Version A - 01/19
13
Table of Contents
182-025-113R561
5
17
4
25
16
3
15
2
12
24
11
23
14
1
10
22
9
21
8
26
27
20
7
13
19
P6
6
18
L-_OUT1
L+_OUT1
BLS-_OUT1
BLS+_OUT1
C-_OUT1
C+_OUT1
BRS-_OUT1
BRS+_OUT1
R-_OUT1
R+_OUT1
LS-_OUT1
LS+_OUT1
RS-_OUT1
RS+_OUT1
SW-_OUT1
SW+_OUT1
1
D
C
B
A
234
SCALE
ASY/SCH PART NO. REV
SHEET
SIZE
B
NONE
SCH DOC NO. PCB PART NO.
SHEET NAME REVISE STAMP
20/12/2017:13:57
1000237999
5069500
5069499
4_S_SWITCH_DB25_OUTPUT
F
P5
182-025-113R561
27
1
14
2
15
3
16
4
17
5
18
6
19
7
20
8
21
9
22
10
23
11
24
12
25
13
26
L-_OUT2
L+_OUT2
BLS-_OUT2
BLS+_OUT2
C-_OUT2
C+_OUT2
BRS-_OUT2
BRS+_OUT2
R-_OUT2
R+_OUT2
LS-_OUT2
LS+_OUT2
RS-_OUT2
RS+_OUT2
SW-_OUT2
SW+_OUT2
L-_OUT2
L+_OUT2
R-_OUT2
R+_OUT2
C-_OUT2
C+_OUT2
SW-_OUT2
SW+_OUT2
LS-_OUT2
LS+_OUT2
RS-_OUT2
RS+_OUT2
L-_OUT1
L+_OUT1
BLS-_OUT1
BLS+_OUT1
C-_OUT1
C+_OUT1
BRS-_OUT1
BRS+_OUT1
R-_OUT1
R+_OUT1
LS-_OUT1
LS+_OUT1
RS-_OUT1
RS+_OUT1
SW-_OUT1
SW+_OUT1
BLS-_OUT2
BLS+_OUT2
BRS-_OUT2
BRS+_OUT2
ANALOG_CINEMA_OUTPUT
REDUNDANT_ANALOG_CINEMA_OUTPUT
4 of 19
INH
A
B
VSS
VEE
VDD
I/0_2
OUT
I/O_1
I/O_0
I/O_3
I/0_2
OUT
I/O_1
I/O_0
I/O_3
C_R_IN_S
NONSYNC_R_IN_S
NONSYNC_L_IN_S
R_IN_S
L_IN_S
SOURCE_SEL0
SOURCE_SEL1
C_L_IN_S
0.1uF
C194 C571
10uF
16V
C195
0.1uF
16V
10uF
C572
21
D2
EDZTE615.6B
21
EDZTE615.6B
D3
9
6
10
U19
MC14052BDR2G
8
7
16
U19
MC14052BDR2G
2
31
5
4
U19
MC14052BDR2G
15
13
14
12
11
U19
MC14052BDR2G
MIC_IN_S
+12V_S
-12V_S
+7.5V
NONSYNC_L_IN_S
R_IN_S
L_IN_S
SOURCE_SEL0
SOURCE_SEL1
C_L_IN_S
C_R_IN_S
NONSYNC_R_IN_S
MIC_IN_S
R952
10K
INPUT_SOURCE_SEL0_S
2
3
1
MMBT3904
Q25
1K
R926
SOURCE_SEL0
+7.5V
10K
R953
INPUT_SOURCE_SEL1_S
2
3
1
Q26
MMBT3904
R927 1K
SOURCE_SEL1
+7.5V
AGND_S
AGND_S AGND_S
AGND_S
AGND_S
1
3
2
D8
AGND_S
+12V_PSU_S
1 2
1 2
1 2
1 2
1 2
1 2
1 2
1 2
1 2
1 2
1 2
1 2
1 2
1 2
1 2
1 2
SG76 SPARK GAP
L-_OUT1
L+_OUT1
SG77 SPARK GAP
SG78 SPARK GAP
R-_OUT1
R+_OUT1
SG79 SPARK GAP
SG87 SPARK GAP
C-_OUT1
C+_OUT1
SG88 SPARK GAP
SG89 SPARK GAP
SW-_OUT1
SW+_OUT1
SG90 SPARK GAP
SG91 SPARK GAP
LS-_OUT1
LS+_OUT1
SG92 SPARK GAP
SG93 SPARK GAP
RS-_OUT1
RS+_OUT1
SG94 SPARK GAP
SG95 SPARK GAP
BLS-_OUT1
BLS+_OUT1
SG96 SPARK GAP
SG97 SPARK GAP
BRS-_OUT1
BRS+_OUT1
SG98 SPARK GAP
12
SG64 SPARK GAP
L-_OUT2
L+_OUT2
12
SG65 SPARK GAP
12
SG54 SPARK GAP
R-_OUT2
R+_OUT2
12
SG55 SPARK GAP
12
SG58 SPARK GAP
C-_OUT2
C+_OUT2
12
SG59 SPARK GAP
12
SG66 SPARK GAP
SW-_OUT2
SW+_OUT2
12
SG67 SPARK GAP
12
SG68 SPARK GAP
LS-_OUT2
LS+_OUT2
12
SG69 SPARK GAP
12
SG70 SPARK GAP
RS-_OUT2
RS+_OUT2
12
SG71 SPARK GAP
12
SG72 SPARK GAP
BLS-_OUT2
BLS+_OUT2
12
SG73 SPARK GAP
12
SG74 SPARK GAP
BRS-_OUT2
BRS+_OUT2
12
SG75 SPARK GAP
K7
1
8
2-1462037-3
BLS-_RELAY_IN
BLS+_RELAY_IN
BLS-_OUT2
BLS-_S
BLS+_OUT2
BLS+_S
D11
2
3
1
AGND_S
+12V_PSU_S
2-1462037-3
8
1
K1
L-_RELAY_IN
L+_RELAY_IN
L-_OUT2
L-_S
L+_OUT2
L+_S
1
3
2
D14
AGND_S
+12V_PSU_S
K2
1
8
2-1462037-3
R-_RELAY_IN
R+_RELAY_IN
R-_OUT2
R-_S
R+_OUT2
R+_S
1
3
2
D15
AGND_S
+12V_PSU_S
K3
1
8
2-1462037-3
C-_RELAY_IN
C+_RELAY_IN
C-_OUT2
C-_S
C+_OUT2
C+_S
D16
2
3
1
AGND_S
+12V_PSU_S
2-1462037-3
8
1
K4
SW-_RELAY_IN
SW+_RELAY_IN
SW-_OUT2
SW-_S
SW+_OUT2
SW+_S
1
3
2
D17
AGND_S
+12V_PSU_S
K5
1
8
2-1462037-3
LS-_RELAY_IN
LS+_RELAY_IN
LS-_OUT2
LS-_S
LS+_OUT2
LS+_S
D18
2
3
1
AGND_S
+12V_PSU_S
2-1462037-3
8
1
K6
RS-_RELAY_IN
RS+_RELAY_IN
RS-_OUT2
RS-_S
RS+_OUT2
RS+_S
D19
2
3
1
AGND_S
+12V_PSU_S
2-1462037-3
8
1
K8
BRS-_RELAY_IN
BRS+_RELAY_IN
BRS-_OUT2
BRS-_S
BRS+_OUT2
BRS+_S
K1
3
2
4
2-1462037-3
K1
6
7
5
2-1462037-3
2-1462037-3
4
2
3
K2
2-1462037-3
5
7
6
K2
2-1462037-3
4
2
3
K3
2-1462037-3
5
7
6
K3
K4
3
2
4
2-1462037-3
K4
6
7
5
2-1462037-3
K5
3
2
4
2-1462037-3
K5
6
7
5
2-1462037-3
2-1462037-3
4
2
3
K6
2-1462037-3
5
7
6
K6
K7
3
2
4
2-1462037-3
K7
6
7
5
2-1462037-3
2-1462037-3
4
2
3
K8
2-1462037-3
5
7
6
K8
AGND_S
AGND_S
AGND_S AGND_S AGND_S AGND_S
AGND_S AGND_S AGND_S AGND_S
AGND_S AGND_S AGND_S AGND_S
AGND_S AGND_S AGND_S AGND_S
AGND_S AGND_S AGND_S AGND_S
AGND_S AGND_S AGND_S AGND_S
AGND_S AGND_S AGND_S AGND_S
AGND_S AGND_S AGND_S AGND_S
19
CPi2000 Service Manual
Version A - 01/19
14
Table of Contents
1
D
C
B
A
234
SCALE
ASY/SCH PART NO. REV
SHEET
SIZE
B
NONE
SCH DOC NO. PCB PART NO.
SHEET NAME REVISE STAMP
20/12/2017:13:57
1000237999
5069500
5069499
5_L/R_CODEC
F
AGND
AGND
VDD-1
VDD-2
VLC
VLS
VQ
VARX
VA
DGND-2
DGND-1
FILT+
LPFLT
REFGND
AGND-1
AGND-2
AINL+
AINL-
AINR+
AINR-
OMCK
ADCIN1
ADCIN2
RMCK
SAI_LRCK
SAI_SCLK
CX_LRCK
CX_SCLK
CX_SDIN1
CX_SDIN2
CX_SDIN3
AOUTA1+
AOUTA1-
AOUTB1+
AOUTB1-
AOUTA2+
AOUTA2-
AOUTB2+
AOUTB2-
AOUTA3+
AOUTA3-
AOUTB3+
AOUTB3-
MUTEC
CX_SDOUT
RXP1/GPO1
RXP2/GPO2
RXP3/GPO3
RXP4/GPO4
RXP5/GPO5
RXP6/GPO6
RXP7/GPO7
AOUTB4-
AOUTB4+
AOUTA4+
AOUTA4-
RXP0
TXP
SAI_SDOUT
CX_SDIN4
+3.3V
AGND
AGND
AGND
AGND
AGND
AGND AGND
AGND
AGND
AGND
AGND
+ +
+
+
++
8
P
N
8
P
N
U22
CS42528
25
40
19
39
18
52
5
24
41
17
53
6
51
4
CODEC0_SDIN2_M
CODEC0_SDIN1_M
BICK_M
LRCK_M
MCLK_M
U22
CS42528
62
54
50
49
23
22
21
20
42
43
44
45
46
47
48
56
38
26
27
29
28
30
31
33
32
34
35
37
36
11
INT
12
7 RST
10
8
9
AD0/CS
AD1/CDIN
SCL/CCLK
SDA/CDOUT
63
64
3
2
1
61
60
55
57
58
59
13
14
16
15
CODEC0_SDOUT_M
LRCK_M
MCLK_M
BICK_M
CODEC0_SDIN1_M
CODEC0_SDIN2_M
VQ12
VQ11
R_AD_IN-
L_AD_IN+
L_AD_IN-
R_AD_IN+
R_IN_M
L_IN_M L_IN_M
R_IN_M
+12V_2
-12V_2
VQ11 VQ12
PIN6
PIN53
CLOSE TO CODEC
SURROUND WITH GND
+12V_2
-12V_2
CODEC_RESET_M CODEC_RESET_M
CODEC0_CS_M
SPI1_MOSI_M
SPI1_SPCK_M
SPI1_MISO_M SPI1_MISO_M
SPI1_SPCK_M
SPI1_MOSI_M
CODEC0_CS_M
C190
0.1uF
0.1uF
C191
0.1uF
C192
0.1uF
C193 C114
0.1uF 0.1uF
C214
C113
100uF
25V 25V
100uF
C213
R117
2.67K
R118
3.16K
2.67K
R217
3.16K
R218
600
L24
C196
0.1uF
C498
10uF
C548
0.01uF 0.1uF
C197
0.1uF
C198C499
10uF
C549
0.01uF
C199
0.1uF
C500
10uF
C200
0.1uF
0.1uF
C215
10uF
C515
0.01uF
C550
C216
0.1uF
C516
10uF
C551
0.01uF
0.1uF
C217 C599
100uF
25V
0.0022uF
C1 C579
0.047uF
R656 2.49K
C575
220uF
16V
33
R76
0
R458
0
R459
R460 0
0
R463
R464 0
0
R465
R77 33
33
R78
R109
100K
C109
47uF
25V
R114 332
R113 634
634
R115
R111 634
R116
100
100
R112
R110
10K
100K
R209 25V
47uF
C209
332
R214
634
R213
R215 634
634
R211
100
R216
R212
100
10K
R210
C590 0.001uF
C112
0.0027uF
0.0027uF
C212
U20
NJM4580CG
1
2
3
U21
NJM4580CG
1
2
3
NJM4580CG
U20
4
8
NJM4580CG
U21
8
4
NJM4580CG
U21
7
6
5
5
6
7
U20
NJM4580CG
C110 120pF
120pF
C111
120pF
C210
C211 120pF
L_HF+
L_HF-
R_LF+
R_LF-
L_LF+
L_LF-
L_MF+
L_MF-
L_HF-
L_HF+
R_LF+
R_LF-
L_LF+
L_LF-
L_MF-
L_MF+
5 of 19
PIN51PIN51
PIN4 PIN4
L134
600
600
L135
R827 10K
+5.0VA +5.0VA
+5.0VA
I=51mA
I=75mA
AGND
AGND
AGND
AGND
AGND
AGND
19
CPi2000 Service Manual
Version A - 01/19
15
Table of Contents
1
D
C
B
A
234
SCALE
ASY/SCH PART NO. REV
SHEET
SIZE
B
NONE
SCH DOC NO. PCB PART NO.
SHEET NAME REVISE STAMP
20/12/2017:13:57
1000237999
5069500
5069499
6_C/SW_CODEC
F
AGND
AGND
VDD-1
VDD-2
VLC
VLS
VQ
VARX
VA
DGND-2
DGND-1
FILT+
LPFLT
REFGND
AGND-1
AGND-2
AINL+
AINL-
AINR+
AINR-
OMCK
ADCIN1
ADCIN2
RMCK
SAI_LRCK
SAI_SCLK
CX_LRCK
CX_SCLK
CX_SDIN1
CX_SDIN2
CX_SDIN3
INT
RST
SCL/CCLK
SDA/CDOUT
AD1/CDIN
AD0/CS
AOUTA1+
AOUTA1-
AOUTB1+
AOUTB1-
AOUTA2+
AOUTA2-
AOUTB2+
AOUTB2-
AOUTA3+
AOUTA3-
AOUTB3+
AOUTB3-
MUTEC
CX_SDOUT
RXP1/GPO1
RXP2/GPO2
RXP3/GPO3
RXP4/GPO4
RXP5/GPO5
RXP6/GPO6
RXP7/GPO7
AOUTB4-
AOUTB4+
AOUTA4+
AOUTA4-
RXP0
TXP
SAI_SDOUT
CX_SDIN4
+3.3V
AGND
AGND
AGND
AGND
AGND AGND
AGND AGND
AGND
AGND
AGND
+ +
+ +
+
+
8
P
N
8
P
N
CS42528
U25
25
40
19
39
18
52
5
24
41
17
53
6
51
4
CODEC1_SDIN2_M
CODEC1_SDIN1_M
BICK_M
LRCK_M
MCLK_M
CS42528
U25
62
54
50
49
23
22
21
20
42
43
44
45
46
47
48
56
38
26
27
29
28
30
31
33
32
34
35
37
36
10
7
8
9
12
11
63
64
3
2
1
61
60
55
57
58
59
13
14
16
15
CODEC1_SDOUT_M
VQ22
VQ21
SW_IN_M
C_IN_M
-12V_2
+12V_2 +12V_2
-12V_2
VQ21 VQ22
LRCK_M
MCLK_M
BICK_M
CODEC1_SDIN1_M
CODEC1_SDIN2_M
SW_AD_IN+
C_AD_IN-
C_AD_IN+
SW_AD_IN-
C_IN_M
SW_IN_M
PIN6
PIN53
CLOSE TO CODEC
SURROUND WITH GND
CODEC_RESET_M CODEC_RESET_M
CODEC1_CS_M
SPI1_MOSI_M
SPI1_SPCK_M
SPI1_MISO_M SPI1_MISO_M
SPI1_SPCK_M
SPI1_MOSI_M
CODEC1_CS_M
C218
0.1uF
0.1uF
C219
0.1uF
C236
C237
0.1uF
C314
0.1uF 0.1uF
C414
C313
100uF
25V 25V
100uF
C413
R317
2.67K
R318
3.16K
2.67K
R417
3.16K
R418
100K
R409 25V
47uF
C409
332
R414
634
R413
R415 634
634
R411
100
R416
R412
100
10K
R410
R309
100K
C309
47uF
25V
R314 332
R313 634
634
R315
R311 634
R316
100
100
R312
R310
10K
C312
0.0027uF
0.0027uF
C412
33
R79
R467 0
0
R468
R469 0
0
R472
R473 033
R80
C591 0.001uF
0
R474
R81 33
600
L32
L33
600
600
L34
C238
0.1uF
C517
10uF
C552
0.01uF 0.1uF
C239
0.1uF
C240
10uF
C518
0.01uF
C553 C241
0.1uF
C519
10uF 0.1uF
C242
0.1uF
C243
10uF
C536
0.01uF
C554
C244
0.1uF
C537
10uF
C555
0.01uF
C576
220uF
16V
0.1uF
C245 C600
100uF
25V
C2
0.0022uF
C580
0.047uF
R657 2.49K
U23
NJM4580CG
1
2
3
U23
NJM4580CG
4
8
NJM4580CG
U23
7
6
5
NJM4580CG
U24
4
8
NJM4580CG
U24
1
2
3
U24
NJM4580CG
7
6
5
120pF
C310
C311 120pF
C410 120pF
120pF
C411
R_MF+
R_MF-
R_MF+
R_MF-
C_HF+
C_HF-
C_LF+
C_LF-
C_MF+
C_MF-
C_HF-
C_HF+
C_LF+
C_LF-
C_MF-
C_MF+
6 of 19
PIN51PIN51
PIN4 PIN4
+5.0VA +5.0VA
+5.0VA
AGND
AGND
AGND
AGND
AGND
AGND
19
CPi2000 Service Manual
Version A - 01/19
16
Table of Contents
634
R1185 LS+
LS-
CODEC2_SDIN2_M
BLS+
BLS-
RS+
RS-
R_HF+
R_HF-
1
D
C
B
A
234
SCALE
ASY/SCH PART NO. REV
SHEET
SIZE
B
NONE
SCH DOC NO. PCB PART NO.
SHEET NAME REVISE STAMP
5069499
5069500
1000237999
20/12/2017:13:57
F
7_LS/RS_CODEC
AGND
AGND
VDD-1
VDD-2
VLC
VLS
VQ
VARX
VA
DGND-2
DGND-1
FILT+
LPFLT
REFGND
AGND-1
AGND-2
U28
CS42528
4
51
6
53
17
41
24
5
52
18
39
19
40
25
CODEC2_SDIN1_M
BICK_M
LRCK_M
MCLK_M
AINL+
AINL-
AINR+
AINR-
OMCK
ADCIN1
ADCIN2
RMCK
SAI_LRCK
SAI_SCLK
CX_LRCK
CX_SCLK
CX_SDIN1
CX_SDIN2
CX_SDIN3
INT
RST
SCL/CCLK
SDA/CDOUT
AD1/CDIN
AD0/CS
AOUTA1+
AOUTA1-
AOUTB1+
AOUTB1-
AOUTA2+
AOUTA2-
AOUTB2+
AOUTB2-
AOUTA3+
AOUTA3-
AOUTB3+
AOUTB3-
MUTEC
CX_SDOUT
RXP1/GPO1
RXP2/GPO2
RXP3/GPO3
RXP4/GPO4
RXP5/GPO5
RXP6/GPO6
RXP7/GPO7
AOUTB4-
AOUTB4+
AOUTA4+
AOUTA4-
RXP0
TXP
SAI_SDOUT
CX_SDIN4 47
46
45
44
57
36
43
42
CS42528
55
60
61
3
20
2
1
64
63
37
35
34
32
33
31
30
28
29
21
22
23
49
50
54
11
62
12
7
8
9
10
U28
15
16
27
26
38
56
14
13
59
48
58
CODEC2_SDOUT_M
+3.3V
AGND
AGND
+5.0VA
VQ32
VQ31
AGND
AGND
RS_IN_M
LS_IN_M
-12V_2
+12V_2
AGND AGND
+12V_2
-12V_2
VQ31
+5.0VA
AGND
VQ32
+5.0VA
AGND
AGND
AGND
AGND
CODEC_RESET_M
CODEC2_CS_M
SPI1_MOSI_M
SPI1_SPCK_M
SPI1_MISO_M
0.1uF
C317
C318
0.1uF
C319
0.1uF
0.1uF
C336 C514
0.1uF
C614
0.1uF
+
100uF
C513
25V
+ C613
100uF
25V
2.67K
R517
3.16K
R518
2.67K
R1192
3.16K
R618
100K
+
R509 25V
47uF
C509
332
R514
R515 634
R511 634
R516
100
100
R1195
10K
R510
0.0027uF
C512
100K
R609
+
C609
47uF
25V
R614 332
R613 634
R615 634
634
R611
100
R616
R612
100
R610
10K
0.0027uF
C612
33
R84
0
R478
0
R479
R480 0
0
R482
0
R483
0.001uFC592
0
R484
R85 33
R86 33
600
L35
L36
600
600
L37
C337
0.1uF
C538
10uF
C556
0.01uF 0.1uF
C338
0.1uF
C339
10uF
C539
0.01uF
C557 C340
0.1uF
C540
10uF
C341
0.1uF
0.1uF
C342 C558
0.01uF
0.1uF
C343
C541
10uF 0.01uF
C559
+ C577
220uF
16V
0.1uF
C344 + C617
100uF
25V
C3
0.0022uF
C581
0.047uF
R658 2.49K
NJM4580CG
U27
1
2
3
U26
NJM4580CG
7
6
5
8
P
N
NJM4580CG
U26
8
4
8
P
N
8
NJM4580CG
U27
4
U26
NJM4580CG
1
2
3
NJM4580CG
U27
7
6
5
10uF
C542
120pF
C510
C511 120pF
120pF
C610
C611 120pF
R_HF-
R_HF+
LS+
LS-
RS-
RS+
RS_AD_IN+
LS_AD_IN-
LS_AD_IN+
RS_AD_IN-
BLS-
BLS+
RS_IN_M
LS_IN_M
SPI1_MOSI_M
MCLK_M
LRCK_M
BICK_M
CODEC_RESET_M
SPI1_SPCK_M
SPI1_MISO_M
CODEC2_SDIN1_M
CODEC2_SDIN2_M
CODEC2_CS_M
PIN6
PIN53
CLOSE TO CODEC
SURROUND WITH GND
7 of 19
PIN51PIN51
PIN4 PIN4
AGND
AGND
AGND
AGND
AGND
AGND
19
CPi2000 Service Manual
Version A - 01/19
17
Table of Contents
1
D
C
B
A
234
SCALE
ASY/SCH PART NO. REV
SHEET
SIZE
B
NONE
SCH DOC NO. PCB PART NO.
SHEET NAME REVISE STAMP
F
8_BLS/BRS_CODEC
5069499
5069500
1000237999
20/12/2017:13:57
AGND
AGND
VDD-1
VDD-2
VLC
VLS
VQ
VARX
VA
DGND-2
DGND-1
FILT+
LPFLT
REFGND
AGND-1
AGND-2
AINL+
AINL-
AINR+
AINR-
OMCK
ADCIN1
ADCIN2
RMCK
SAI_LRCK
SAI_SCLK
CX_LRCK
CX_SCLK
CX_SDIN1
CX_SDIN2
CX_SDIN3
INT
RST
SCL/CCLK
SDA/CDOUT
AD1/CDIN
AD0/CS
AOUTA1+
AOUTA1-
AOUTB1+
AOUTB1-
AOUTA2+
AOUTA2-
AOUTB2+
AOUTB2-
AOUTA3+
AOUTA3-
AOUTB3+
AOUTB3-
MUTEC
CX_SDOUT
RXP1/GPO1
RXP2/GPO2
RXP3/GPO3
RXP4/GPO4
RXP5/GPO5
RXP6/GPO6
RXP7/GPO7
AOUTB4-
AOUTB4+
AOUTA4+
AOUTA4-
RXP0
TXP
SAI_SDOUT
CX_SDIN4
+3.3V
AGND
AGND
AGND
AGND
AGND AGND
AGND AGND
AGND
AGND
AGND
+ +
++
+
+
8
P
N
8
P
N
U31
18
39
19
40
25
CS42528
4
51
6
53
17
41
24
5
52
CODEC3_SDIN1_M
BICK_M
LRCK_M
MCLK_M 54
62
CS42528
U31
15
16
14
13
59
58
57
55
60
61
3
2
1
64
63
11
12
7
8
9
10
36
37
35
34
32
33
31
30
28
29
27
26
38
56
48
47
46
45
44
43
42
20
21
22
23
49
50
CODEC3_SDOUT_M
VQ42
VQ41
BRS_IN_M
BLS_IN_M
-12V_2
+12V_2 +12V_2
-12V_2
VQ41 VQ42
LRCK_M
MCLK_M
BICK_M
CODEC3_SDIN1_M
BRS_AD_IN+
BLS_AD_IN-
BRS_AD_IN-
BLS_IN_M
BRS_IN_M
PIN6
PIN53
CLOSE TO CODEC
SURROUND WITH GND
CODEC_RESET_M CODEC_RESET_M
CODEC3_CS_M
SPI1_MOSI_M
SPI1_SPCK_M
SPI1_MISO_M SPI1_MISO_M
SPI1_SPCK_M
SPI1_MOSI_M
CODEC3_CS_M
C345
0.1uF
0.1uF
C346
0.1uF
C348
C349
0.1uF
C714
0.1uF 0.1uF
C814
25V
C713
100uF
25V
100uF
C813
2.67K
R717
R718
3.16K
2.67K
R817
R709
100K
25V
47uF
C709
332
R714
634
R713
R715 634
R711 634
100
R716
R712
100
R710
10K
C712
0.0027uF
25V
47uF
C809
100
R816
C812
0.0027uF
33
R87
R486 0
0
R487
R488 0
0
R490
R491 0
C593 0.001uF
0
R492
R88 33
R89 33
L38
600
600
L39
600
L42
0.1uF
C366C543
10uF
C560
0.01uF 0.1uF
C367
0.1uF
C368C544
10uF 0.01uF
C561 C369
0.1uF
10uF
C545
0.1uF
C370
0.1uF
C371
10uF
C546
0.01uF
C562
0.1uF
C372
10uF
C547 C563
0.01uF
16V
220uF
C578
C373
0.1uF
C618
100uF
25V
C4
0.0022uF
C582
0.047uF
R659 2.49K
NJM4580CG
U29
7
6
5
U29
NJM4580CG
4
8NJM4580CG
U29
1
2
3
8
4
U30
NJM4580CG
U30
NJM4580CG
2
1
3
6
7
5U30
NJM4580CG
BLS_AD_IN+
120pF
C710
C711 120pF
120pF
C811
C810 120pF
BRS+
BRS-
BRS-
BRS+
SW+
SW-
SW+
SW-
8 of 19
PIN51PIN51
PIN4 PIN4
3.16K
R1193
634
R1182
332
R1181
R1183 634
100K
R1155 R1146
10K
634
R1184
R1194
100
+5.0VA +5.0VA
+5.0VA
AGND
AGND
AGND
AGND
AGND
AGND
19
CPi2000 Service Manual
Version A - 01/19
18
Table of Contents
R126 2K
2K
R124
1
D
C
B
A
234
SCALE
ASY/SCH PART NO. REV
SHEET
SIZE
B
NONE
SCH DOC NO. PCB PART NO.
SHEET NAME REVISE STAMP
F
5069500
20/12/2017:13:57
1000237999
9_LEFT1_OUTPUT
5069499
L_MF-_OUT_M
LEFT1_CH1_LOAD_STA
LEFT1_CH1_AMP_STA
L_MF+_OUT_M
L_HF+_OUT_M
L_HF-_OUT_M
LEFT1_CH2_AMP_STA
LEFT1_CH2_LOAD_STA
L_MF-_OUT_M
AGND
AGND
AGND
L_MF+
L_MF-
AGND
AGND
AGND
AGND
AGND
L_MF+_OUT_M
AGND
AGND
OUTPUT_MUTE
OUTPUT_MUTE
AGND
AGND
L_HF-_OUT_M
AGND
AGND
AGND
L_HF+
L_HF-
AGND
AGND
AGND
AGND
AGND
L_HF+_OUT_M
AGND
AGND
OUTPUT_MUTE
OUTPUT_MUTE
AGND
AGND
-12V
+12V
AGND
-12V
+12V
AGND
-12V_2
+12V_2
AGND
1K
R121
1K
R120
R123 5.49K
5.49K
R122
2K
R156
R154
2K
R125
14K
14K
R129
R127 3.32K
R128 3.32K
10K
R130
R135 10K
10K
R136
R131 10K
R137 10K
10K
R134
10K
R133
10K
R132
R138 15.4 15.4
R140
2K
R142
2K
R148
MMBF170
2
3
1
Q103
2
3
1
Q101
MMBF170
2
3
1
MMBF170
Q104
2
3
1
Q102
MMBF170
1 2
SG103
SPARK GAP
2.5K
L107
2.5K
L105
475K
R144 R146
475K
R145
475K 475K
R147
R143
2K
R149
2K
1 2
SPARK GAP
SG104
2.5K
L108
2.5K
L106
C120
0.0033uF
0.0027uF
C121
0.0027uF
C122
C127 47pF
C131
22pF
22pF
C130
+
C125
22uF
16V
+
16V
220uF
C128
+
C129
220uF
16V
1K
R151
1K
R150
R153 5.49K
5.49K
R152
R155
14K
R534 14K
R157 3.32K
3.32K
R158
C150
0.0033uF
0.0027uF
C151
C152
0.0027uF
15.4
R139 15.4
R141
10K
R160
10K
R165
R166 10K
R161 10K
R167 10K
10K
R164
R163
10K
R162
10K
15.4
R168 15.4
R170
R172
2K
R178
2K
MMBF170
Q107
1
3
2
Q105
MMBF170
1
3
2
Q108
MMBF170
1
3
2
MMBF170
Q106
1
3
2
12
SPARK GAP
SG105
2.5K
L111
2.5K
L109
475K
R174
475K
R176
475K
R175
475K
R177
2K
R173 R179
2K
1 2
SPARK GAP
SG106
2.5K
L25
2.5K
L110
C157 47pF 22pF
C161
C160
22pF
+
16V
22uF
C155
+
220uF
16V
C158
+
16V
220uF
C159
R169 15.4 15.4
R171
C126 22pF
C156 22pF
4.99K
R679
R680 4.99K
R583
10K
R191
100K 120pF
C463
1 2
SPARK GAP
SG32
120pF
C464
1 2
SPARK GAP
SG33
1 2
SPARK GAP
SG34
1 2
SG35
SPARK GAP 120pF
C465 C466
120pF
R584
10K 100K
R192
R681 4.99K
4.99K
R682
0.1uF
C374
C375
0.1uF
C376
0.1uF
0.1uF
C377
0.1uF
C378
0.1uF
C379
J6
DRH-E15SB-NJ-101
16
17
15
14
12
11
13
5
6
1
7
2
8
3
9
4
10
NJM4580CG
U32
7
6
5
NJM4580CG
U33
7
6
5
8
P
N
NJM4580CG
U32
8
4
8
P
N
U33
NJM4580CG
8
4
8
P
N
NJM4580CG
U34
8
4
NJM4580CG
U33
1
2
3
U34
NJM4580CG
1
2
3
NJM4580CG
U34
7
6
5
NJM4580CG
U32
1
2
3
C124
120pF
C123 120pF
120pF
C132
C133
120pF
C134
120pF
120pF
C135
C154
120pF
C153 120pF
120pF
C162
C163
120pF
120pF
C164
C165
120pF
L_HF-
L_HF+
OUTPUT_MUTE
OUTPUT_MUTE
OUTPUT_MUTE
OUTPUT_MUTE
L_MF-
L_MF+
LEFT1_CH1_AMP_STA
LEFT1_CH1_LOAD_STA LEFT1_CH2_LOAD_STA
LEFT1_CH2_AMP_STA
L_MF-_OUT_M
L_MF-_OUT_M
L_MF+_OUT_M
L_MF+_OUT_M
L_HF-_OUT_M
L_HF-_OUT_M
L_HF+_OUT_M
L_HF+_OUT_M
L_LF&L_HF-Bi-amp
L&R-Passive
CLOSE TO CODEC
CLOSE TO CODEC
CLOSE TO SOCKET
CLOSE TO SOCKET
CLOSE TO SOCKET CLOSE TO SOCKET
L_MF&L_HF-Tri-amp
9 of 19
AGNDAGND AGND AGND AGND AGND AGND AGND AGND AGND AGND AGND AGND
AGND AGND AGND
AGND AGND AGND
AGND AGND AGND
AGND AGND AGND
19
CPi2000 Service Manual
Version A - 01/19
19
Table of Contents
2K
R971
R970
2K
1
D
C
B
A
234
SCALE
ASY/SCH PART NO. REV
SHEET
SIZE
B
NONE
SCH DOC NO. PCB PART NO.
SHEET NAME REVISE STAMP
F
10_LEFT2_OUTPUT
5069499
5069500
1000237999
20/12/2017:13:57
L_LF-_OUT
LEFT2_CH1_LOAD_STA
LEFT2_CH1_AMP_STA
L_LF+_OUT
R_LF+_OUT
R_LF-_OUT
LEFT2_CH2_AMP_STA
LEFT2_CH2_LOAD_STA
L_LF-_OUT
AGND
AGND
AGND
L_LF+
L_LF-
AGND
AGND
AGND
AGND
AGND
L_LF+_OUT
AGND
AGND
OUTPUT_MUTE
OUTPUT_MUTE
AGND
AGND
R_LF-_OUT
AGND
AGND
AGND
R_LF+
R_LF-
AGND
AGND
AGND
AGND
AGND
R_LF+_OUT
AGND
AGND
OUTPUT_MUTE
OUTPUT_MUTE
AGND
AGND
-12V
+12V
AGND
-12V
+12V
AGND
-12V_2
+12V_2
AGND
R886 1K
1K
R887
5.49K
R986
R987 5.49K
R998
14K
R999 14K
3.32K
R1010
R1011 3.32K
R1147 10K
10K
R782
10K
R783
R784 10K
10K
R785
10K
R786
10K
R787
R788
10K
15.4
R905 15.4
R906
2K
R930 R931
2K
3
1
2
MMBF170
Q3
1
Q4
MMBF170
2
3
Q5
MMBF170
2
3
1
MMBF170
2
3
1
Q6
1 2
SG14
SPARK GAP
120pF
C904
L59 2.5K
L60 2.5K
120pF
C180
475K
R1212
475K
R1023
R1024
475K 475K
R1025
R932
2K 2K
R933
1 2
SPARK GAP
SG15
C903
120pF
2.5K
L61
L62 2.5K
120pF
C660
C859
0.0033uF
C865
0.0027uF
C866
0.0027uF
120pF
C902
C899 120pF
C847 47pF
C783
22pF
22pF
C784
+
C853
22uF
16V
+
16V
220uF
C771
+
C772
220uF
16V
R888 1K
R889 1K
5.49K
R988
R989 5.49K
14K
R1000
14K
R1001
3.32K
R1012
3.32K
R1013
0.0033uF
C860 0.0027uF
C867
C868
0.0027uF
C663
120pF
120pF
C758
15.4
R907 R908 15.4
10K
R789
10K
R790
R791 10K
10K
R792
R793 10K
10K
R794
R795
10K
R796
10K
15.4
R909 15.4
R910
2K
R934 R935
2K
MMBF170
Q7
1
3
2
Q8
MMBF170
1
3
2
Q9
MMBF170
1
3
2
MMBF170
Q11
1
3
2
12
SG42
SPARK GAP
C757
120pF
L67 2.5K
2.5K
L68
120pF
C496
475K
R1026
475K
R1210
475K
R1211
475K
R1029
2K
R936 R937
2K
1 2
SG43
SPARK GAP
C667
120pF
L69 2.5K
2.5K
L70
C495
120pF
C848 47pF 22pF
C785
C786
22pF
+
16V
22uF
C854
+
C773
220uF
16V
+
16V
220uF
C774
R911 15.4 15.4
R912
C787 22pF
C788 22pF
R1078 4.99K
4.99K
R1079
R797
10K 100K
R899 C494
120pF
1 2
SPARK GAP
SG44
120pF
C447
1 2
SG45
SPARK GAP
1 2
SG46
1 2
SPARK GAP SPARK GAP
SG47 C671
120pF
C181
120pF 10K
R798 R900
100K
4.99K
R1080
R1081 4.99K
C296
0.1uF
C297
0.1uF
0.1uF
C298
C439
0.1uF
C440
0.1uF
0.1uF
C441
DRH-E15SB-NJ-101
J15
16
17
15
14
12
11
13
5
6
1
7
2
8
3
9
4
10
NJM4580CG
U61
7
6
5
8
P
N
U61
NJM4580CG
8
4
8
P
N
NJM4580CG
U62
4
8
8
P
N
U63
NJM4580CG
8
4
NJM4580CG
U62
1
2
3
NJM4580CG
U63
1
2
3
NJM4580CG
U62
7
6
5
U61
NJM4580CG
1
2
3
NJM4580CG
U63
7
6
5
2K
R973
2K
R972
L_LF+
L_LF-
R_LF+
R_LF-
OUTPUT_MUTE
OUTPUT_MUTE
OUTPUT_MUTE
OUTPUT_MUTE
L_LF-_OUT
L_LF-_OUT
L_LF+_OUT
L_LF+_OUT
R_LF-_OUT
R_LF-_OUT
R_LF+_OUT
R_LF+_OUT
LEFT2_CH1_AMP_STA
LEFT2_CH1_LOAD_STA
LEFT2_CH2_AMP_STA
LEFT2_CH2_LOAD_STA
L_LF&R_LF-Tri-amp
Null-Passive
CLOSE TO CODEC
CLOSE TO CODEC
CLOSE TO SOCKET
CLOSE TO SOCKET
CLOSE TO SOCKET CLOSE TO SOCKET
Null-Bi-amp
10 of 19
AGND AGND AGND
AGND AGND AGND
AGND AGND AGND
AGND AGND AGND
AGND AGNDAGNDAGNDAGNDAGNDAGNDAGNDAGNDAGNDAGNDAGND AGND
19
CPi2000 Service Manual
Version A - 01/19
20
Table of Contents
Other manuals for JBL CPi2000
1
Table of contents
Other Harman Processor manuals
