Harman AXYS TUNNEL Intellivox ADC-V90 User manual

Installation Manual
Intellivox ADC-V90 & ADC-H90 models
(Part Nos. 576125, 577125, 577135, 576126, 577126 and 577136)
EN54-24

AXYS®Intellivox ADC Installation Manual
2201509/ADCIM
EC DECLARATION OF CONFORMITY
13
This document confirms that the product manufactured by Duran Audio BV and described hereafter is in conformity with
the following directive(s) and meets the requirements of the following standard(s):
Applicable directive(s) LVD 2006/95/EC (see note 1)
Applicable standard(s) Not applicable Provided options Not applicable
Product details:
Construction product description Loudspeaker for voice alarm systems for fire detection and fire alarm systems for
buildings
Product model/type ADC-V90
ADC-H90
Document references:
Datasheet(s) 201509/V90_2.3 (ADC-V90 datasheet)
201509/H90_2.3 (ADC-H90 datasheet)
Other references Not applicable
Manufacturer:
Name Duran Audio BV
Address
Koxkampseweg 10
5301 KK Zaltbommel
The Netherlands
Web www.duran-audio.com
Authorized by G. Duran - General manager
Place and date of issue Zaltbommel – September 25, 2015
Signature
Notes:
1. Only if connected in accordance with the manufacturer’s instructions to mains operated audio equipment with safety
properties according to the relevant harmonized standards.

AXYS®Intellivox ADC Installation Manual
3
201509/ADCIM
Declaration of Performance
According to Construction Products Regulation (CPR) 305/2011
No: 2014-001
1. Unique identification code of the product-type:
ADC-V90
ADC-H90
2. Type, batch or serial number or any other element allowing identification of the construction product
as required pursuant to Article 11(4):
Each product has a unique serial number specified on the product label
3. Intended use or uses of the construction product, in accordance with the applicable harmonised
technical specification, as foreseen by the manufacturer:
Construction product Loudspeaker for voice alarm systems for fire detection and fire
alarm systems for buildings
Intended use Fire safety
Harmonised technical specification EN 54-24:2008
Fire detection and fire alarm systems
Part 24: Components of voice alarm systems - Loudspeakers
Provided options Type B
4. Name, registered trade name or registered trade mark and contact address of the manufacturer as
required pursuant to Article 11(5):
Name Duran Audio BV
Address Koxkampseweg 10
5301 KK Zaltbommel
The Netherlands
Web www.duran-audio.com
Branding/Trade name Models are sold under both AXYS & JBL brand names

AXYS®Intellivox ADC Installation Manual
4201509/ADCIM
5. Where applicable, name and contact address of the authorised representative whose mandate covers
the tasks specified in Article 12(2):
Not applicable
6. System or systems of assessment and verification of constancy of performance of the construction
product as set out in Annex V:
System 1
7. Declaration of performance concerning a construction product covered by a harmonised standard:
Notified body details:
Name Scientific and Research Centre for Fire Protection
named after Józef Tuliszkowski - National Research Institute
Identification CNBOP-PIB-1438
Address
Nadwislanska 213 Street
05-420 Józefów
Poland
Web
www.cnbop.pl
EC certificate of conformity 1438/CPD/0306
ITT report No. 5136/BA/11
8. Declaration of performance concerning a construction product for which a European Technical
Assessment has been issued:
Not applicable

AXYS®Intellivox ADC Installation Manual
5
201509/ADCIM
9. Declared performance:
Essential characteristics Performance Harmonised technical
specification
EN 54-24:2008 - Type B
Frequency response limit Passed Section 4.2
Reproducibility Passed Section 5.2
Rated impedance Passed Section 5.3
Horizontal and vertical coverage angles
Passed Section 5.4
Maximum sound pressure level
Passed Section 5.5
Durability Passed Section 4.3
Construction Passed Section 4.4
Marking and data Passed Section 4.5
Rated noise power (durability) Passed Section 5.6
Enclosure protection Passed Section 5.18
Dry heat (operational) Passed Section 5.7
Dry heat (endurance) Passed Section 5.8
Cold (operational) Passed Section 5.9
Damp heat, cyclic (operational) Passed Section 5.10
Damp heat, steady state (endurance) Passed Section 5.11
Damp heat, cyclic (endurance) Passed Section 5.12
Sulfur dioxide corrosion (endurance) Passed Section 5.13
Shock (operational) Not applicable Section 5.14
Impact (operational) Passed Section 5.15
Vibration, sinusoidal (operational) Passed Section 5.16
Vibration, sinusoidal (endurance) Passed Section 5.17

AXYS®Intellivox ADC Installation Manual
6201509/ADCIM
10. The performance of the product identified in points 1 and 2 is in conformity with the declared
performance in point 9.
This declaration of performance is issued under the sole responsibility of the manufacturer identified
in point 4.
Signed for and on behalf of the manufacturer by:
Name and function G. Duran - General manager
Place and date of issue Zaltbommel - September 25, 2015
Signature

AXYS®Intellivox ADC Installation Manual
7
201509/ADCIM
USER’S NOTICE AND DISCLAIMER
No part of this manual including the software
described in it may be reproduced, transmitted,
transcribed, stored in a database system or
translated without the express written permission
of Duran Audio BV.
Documentation kept by the end user for back-up
purposes is excluded from the above.
All products and corporate names mentioned
in this manual may be registered trademarks or
copyrights of their respective companies. They
are used here for indicative purposes only.
The information contained in this manual has
been carefully checked for accuracy; however no
guarantee is given with respect to its correctness.
Duran Audio BV accepts no responsibility or
liability for any errors or inaccuracies that may
appear in this manual or the products and
software described in it.
Specifications and information contained in
this manual are subject to change at any time
without notice.
© 2015 Duran Audio BV. All rights reserved.

AXYS®Intellivox ADC Installation Manual
8201509/ADCIM
This page has been left blank intentionally

AXYS®Intellivox ADC Installation Manual
9
201509/ADCIM
EC declaration of conformity............................2
Declaration of Performance ..........................3-6
User’s Notice and disclaimer............................7
1. Important Safety Instructions ....................... 10
2. Introduction ..................................... 11
Applicable models and variants....................11
What’s in the packaging .........................12
3. Installation Guide................................. 13
Preparing For Installation ........................13
Intellivox ADC Connections .......................13
Mechanical Installation ..........................14
Acoustic Centre ................................14
Mounting Options ...........................15-16
Mounting Procedure ............................17
Wiring Details .................................18
Tap Setting ...................................18
Correction EQ and High-Pass Filter .................19
Securing The Front Grill ..........................19
Pilot Tone Indicator .............................20
Speaker Protection .............................20
4. Appendices ......................................21
Appendix 1 - Optional Accessories .................21
TABLE OF CONTENTS

AXYS®Intellivox ADC Installation Manual
10 201509/ADCIM
This symbol is intended to alert you to the presence
of uninsulated dangerous voltages within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
This symbol is used throughout this manual and is
intended to alert you to the presence of important
instructions.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Only use attachments/accessories specified by the
manufacturer.
10) Use only with the cart, stand, tripod, bracket or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid
injury from tip-over.
11) Refer servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, liquid has been spilled or objects have fallen into the
apparatus, the apparatus does not operate normally, or has
been dropped.
Warning -The installer should ensure that the
mechanical mounting method employed should
be capable of supporting four times the weight of the
unit (i.e., with a safety factor of 4). Always use both of
the brackets provided with the unit.
1. IMPORTANT SAFETY INSTRUCTIONS