Harper & Bright Designs BARTHOLDI SOFA SET WF190610AAC User manual

ASSEMBLY INSTRUCTION
BARTHOLDI SOFA SET
WF190610AAC
WF190610AAA

Notice:
1. 50% Tighten before fixing all screws, Allen wrench is
recommended instead of an electric drill.
2. Place the item on a flat ground to adjust and make sure
it remains stable.
3. Tighten up all screws with tools gradually.
4. If the screws are not aligned with holes during asembly,
please loosen all the other screws to 50% and continue
the assembly process.
5. If the item is not stable, please loosen all the screws,
adjust it on a flat ground and tighten up all screws again.
6. Note: If one or some screws are fully tightened during
assembly, chances are the others will not be aligned with
holes. In addition, all the holes are designed to be relatively
larger to provide more space for the adjustment of the screws.
A
B
C
D
I
F
A
B
J
E
G
H
K
L
M

Part list
A B C
D E F
G H I
JK L
M
Right frame (3 pcs) Left frame (3 pcs) Seat frame (2 pcs)
Back frame (2 pcs) Bench seat frame (1 pc) Bench back frame (1 pc)
Table right frame (1 pc) Table left frame (1 pc) Seat cushion (2 pcs)
Back cushion (1 pc) Table top frame (1 pc) Table shelf frame (1 pc)
Table glass (1 pc)

1 2
Bolt M6 x 25 mm (4 pcs) Bolt M6 x 35 mm (23 pcs)
Hardware list
3
4 5
Bolt M6 x 40 mm (16 pcs)
Bolt M6 x 60 mm (6 pcs) Allen key M4 (1 pc)

STEP 1 (Chair assembly)
C
D
Connect Back frame (D) & Seat frame (C)
with Bolt (3)
3
STEP 2
Connect part from Step 1 & Right frame (A)
with Bolt (3) & Bolt (4)
A
STEP 3
4
3
3
3
Connect part from Step 2 & Left frame (B)
with Bolt (2), Bolt (3) & Bolt (4)
I
STEP 4
Put on Seat cushion (I) to complete single chair
4
3
3
3
B

STEP 5 (Bench assembly)
Connect Bench seat frame (F) & Bench back frame (E) with Bolt (3)
3
3
3
F
E
STEP 6
Connect part from Step 5 & Right frame (A) with Bolt (2), Bolt (3) & Bolt (4)
A
43
3

STEP 7
Connect part from Step 6 & Left frame (B) with Bolt (2), Bolt (3) & Bolt (4)
4
3
3
STEP 8
Put on Bench cushion (J) to complete Bench
J
B

STEP 9 (Table assembly)
Connect Table left frame (H) & Table top
frame (K) with Bolt (1)
H
K
1
1
STEP 10
Connect part from Step 9 & Table right
frame (G) with Bolt (1)
G
11
STEP 11
Connect part from Step 10 & Table shelf
frame (L) with Bolt (2)
L
22
STEP 12
Put on Table glass (M) to complete the Table
M