domi LYFT0524 User manual

[e-mail]

Baseboard Supporting tube Baseboard
Supporting tube
Base support tube Base support tube Plastic sleeve
Aluminum
base frame
Aluminum
base frame Aluminum base frame Steel triangle
bracket Plastic triangle bracket
Table Leg Table support
tube Table top Arm Arm
Chair support
tube Chair support tube Chair Support arm Support arm
Roof connect tube Roof connect tube Steel bracket Roof connect tube
Roof support tube Connecting
rod roller Canopy Steel flat washer
Plastic pipe Plastic pipe Rubber pipe Steel flat washer Netting

Steel nut Plastic cap Plastic cap

Connect baseboard A and A3 using bolt 7, steel flat washer Z and nut 17.

Place the supporting tube A1 and A2
on the baseboard A and A3.Then, fix
them with bolt 1 and steel flat washer Z.

(1) Connect base support tube B with
plastic sleeve D and insert them
into base support tube C.
(2) Fix the connection of base
support tube B, plastic sleeve D
and base support tube C with
steel flat washer V, bolt 6 and nut 17.
(3) Fix base support tube B and base
support tube C with bolt 1 and nut 17.

(1) Use bolt 11, plastic pipe W, steel flat
washer V and nut 17 to connect the base
frame with middle supporting tube A1.
(2) Use bolt 5, steel flat washer V,
nut 17 to connect the base frame
to the supporting tube A1 and A2 .
Plastic pipe W is placed between
supporting tube A1 and base support tube B.
A2

(1) Screw out the nut and install steel bracket Q1,
then screw back the nut and tighten.
(2) Align the holes on steel bracket Q1 and fixing bar.
(3) Align the holes on Aluminum base frame R with
fixing bar and steel bracket Q1.
(4) Screw them with bolt 2 and nut 17.

Attach steel and plastic triangle bracket together.
Fix them on Aluminum base frame F with bolt 1
and steel flat washer V.
G1: Plastic triangle bracket
G: Steel triangle bracket.

Assemble table legs H on Aluminum base frame E
using bolt 8, nut 17 and steel flat washer V.

Place the connecting rod roller 7 onto the base frame,
then put the aluminum base frame on the top.
Base Frame
Aluminum Base Frame
Brake rod
The brake rod can be turned to
stop the connecting rod roller T
from rolling.

(1) Install the table J onto the table legs H.
Screw the table and fixing bar with steel
flat washer V, bolt 2 and nut 17.
(2) Connect the table with table
legs with bolt 1 and steel flat
washer V.

Strengthen the table legs with table support tube,
using steel flat washer V, bolt 2 and nut 17.

(1) Assemble the chair arms using chair support
tube L and M. Align the holes and connect with
bolt 18 as shown.
(2) Place the chairs N onto the chair frame.
Don't fully tighten the bolts!

Fix the chair and chair frame with plastic pipe X,
steel flat washer V, bolt 9&13 and nut 17.
Plastic pipe X is between the chair and arm.
Don't fully tighten the bolts!

Tighten the bolts on the chairs,
then put the chairs onto the aluminum base frame.

(1) Attach the rubber strip Y on the aluminum base frame E as shown.
(2) Install chairs onto aluminum base frame.
(3) Align the holes and tighten with steel flat washer V, bolt 10 and nut 17.
Aluminum Base Frame