Signature Hardware COUNTRYVALE BENCH User manual

COUNTRYVALE BENCH ASSEMBLY
GETTING STARTED
BEFORE YOU BEGIN
We recommend consulting a professional if you are
unfamiliar with installing this type of product. Signature
Hardware accepts no liability for any damage encoun-
tered, or for personal injury during installation.
Observe all local building codes.
Unpack and inspect the bench for shipping damage. If
any damage is found, contact our Customer Relations
team at 1-866-855-2284.
Ensure that you have gathered all the required
materials that are needed for the installation.
Heavy peices of the bench require the assistance of
another person(s) to assemble.
TOOLS AND MATERIALS:
1Countryvale Granite Bench Assembly
Neutral Cure
Silicone Sealant Level Damp Cloth

COUNTRYVALE BENCH ASSEMBLY
Installation
3. Once the seat and ends are properly positioned,
remove the seat while keeping the ends in place. Apply
a generous amount of neutral cure silicone adhesive
where the seat rests on the ends.
4. Set the seat back onto ends, and press firmly into
place to ensure the adhesive properly bonds. Wipe
away any excess adhesive with a damp cloth.
1. Determine a location to place the bench. Ensure
that the ground is level.
2. With the assistance of others, hold each of the two
ends in place. Set the seat onto the ends, and make
any adjustments until properly positioned.
2Countryvale Granite Bench Assembly

COUNTRYVALE BENCH ASSEMBLY
6. Allow the bench to settle for 24 hours before use,
to allow the adhesive to fully dry.
5. Apply a generous amount of silicone adhesive
within the slots for the backrest. Lower the backrest
into position, and press firmly into place. Wipe away
any excess adhesive with a damp cloth.
3Countryvale Granite Bench Assembly
24 hr