Harper PGC NYLON HAND TRUCK Series User manual

HARPER TRUCKS INC.
INSTRUCTIONS
1
1. INSERT CROSSMEMBERS (A), WITH NAME
TAP DOWNWARD LIGHTLY TO SECURE TABS.
FORWARD, INTO THE SIDEFRAME (B).
B
A
A
A
A 3 PGBLK-5 CROSSMEMBER
B 2 PGBLK-2 SIDE FRAME
D 4 HDBC.375X1.500 CARRIAGE BOLT
E 4 HDNFL.375 NUT 3/8"-16
F
G
H
FRAME ASSEMBLY
PARTS LISTING
2. INSERT THE HANDLE (F) INTO THE SIDE-
FRAME (B) SOCKET AND SECURE WITH
FASTENERS (G&H).
HANDLE ASSEMBLY
H 4 HDNFL.250 NUT 1/4"-20
G 4 HDS.250X2 PHILLIPS HEAD SCREW
F 1 PCSBLK HANDLE
PGC NYLON HAND TRUCK SERIES
QTY PART NUMBER DESCRIPTION

FORM AIPGCSD
E
D
QTY PART NUMBER DESCRIPTION
I 1 PBSABLK-1 BASE PLATE
L 1 AX N225 AXLE
M 2 WHK17 WHEEL
N 6 HDW.625X1.125 WASHER
P 4 HDPH.375X1.500 COTTER PIN
I
L
M
N
P
3. FASTEN THE BASE PLATE (I) TO THE FRAME
WITH 4 BOLTS (D) AND NUTS (E).
4. SLIDE AXLE (L) THROUGH SIDEFRAME (B)
AXLE HOLE AS SHOWN. INSERT 2 WASHERS (N)
ON THE AXLE BETWEEN THE FRAMES.
5. INSTALL 2 COTTER PINS (P) IN THE AXLE BETWEEN
THE SIDEFRAMES WITH THE WASHER BETWEEN THE
COTTER PIN AND SIDEFRAME.
6. ASSEMBLE THE WHEELS ONTO THE AXLE WITH 1
WASHER (N) ON THE INSIDE AND 1 WASHER (N) ON THE
OUTSIDE OF THE WHEEL. SECURE WITH A COTTER PIN (P)
THROUGH EACH END OF THE AXLE (L). BEND LONG END
BASE/AXLE ASSEMBLY
PARTS LISTING
HARPER TRUCKS INC.
2
TRUCKS Inc.
Harper
PROUDLY MADE IN WICHITA, KANSAS
HARPER
TM
OF COTTER PIN.
OR VISIT WWW.HARPERTRUCKS.COM
FOR ASSISTANCE CALL 1-800-835-4099