Harrod FBL-699 User manual

A minimum of 2 people are required for this assembly
Estimated 60 minutes assembly time
INS696
Revision 0
17/10/2017
FBL-699
3G Weighted UEFA Portagoal
60
mins
iIMPORTANT: Please read these assembly instructions carefully
before starting to assemble your Goal
ASSEMBLY INSTRUCTIONS
net sold separately

Pack Contents
H
K
U
D
O
R
R
A
Code
Product
FBL-699
3G Weighted UEFA Portagoal
Wtd UEFA Portagoal
1. Crossbar
2. L/H Upright
3. R/H Upright
4. Sidebar
5. Backbar
6. L/H Net Support Bracket
7. R/H Net Support Bracket
8. Net Support
9. Solid Ballast
1.
x2
FEP360
*parts are not to scale
ode in brackets
refers to packed parts
**c
Page 1
2.
x2
FEP945
4.
x4
PEP947 (FEP947)
Tools Required
17mm
6mm
1x 17mm Spanner
1x 6mm Key (supplied)Hex
5.
x2
FEP951
4mm
1x 4mm Hex Key (supplied)
8mm
1x 8mm Key (supplied)Hex
Optional Extras
FBL-689:
FBL-698:
Box Net
Bottom Hinged Net Support
3.
x2
FEP946
6.
x2
FEP949
7.
x2
FEP950
9.
x4
FEP070
8.
x4
PEP639(FEP639)

Code
Product
FBL-699
3G Weighted UEFA Portagoal
Pack Contents
Wtd UEFA Portagoal
10. Ballast Tube
11. R/H Hi-Raise Wheel
12. L/H Hi-Raise Wheel
13. R/H CAM Raise Wheel
14. L/H CAM Raise Wheel
11.
x2
FPK282
*parts are not to scale
ode in brackets
refers to packed parts
**c
Page 2
14.
x2
FPK321
13.
x2
FPK321
12.
x2
FEP282
10.
x2
FEP551

B.
x4
PEP844
L.
x20
BOL709
Code
Product
FBL-699
3G Weighted UEFA Portagoal
FPK699: Weighted UEFA
Portagoal Fittings
A. L Plate
B. Strap Bracket
C. Top Bracket
D. Net Holder Clip
E. M10 Handwheel
H. M10x40mm Button Screw
I. M10x50mm Button Screw
J. M10x25mm Square Screw
K. M6x10mm Button Screw
L. M10 Washer
M. M10 Nyloc Nut
F. M10 Spacer
G. M10x30mm Cap Screw
Fittings Pack Contents
A.
x4
PEP062
C.
x4
PEP328
D.
x4
CLP055
E.
x4
BOL399
F.
x4
BOL739
G.
x16
BOL333
J.
x28
BOL336
I.
x12
BOL308
H.
x4
BOL321
Page 3
K.
x4
BOL672
M.
x24
BOL202

Code
Product
FBL-699
3G Weighted UEFA Portagoal
P.
x200
HKS029 (FPK369)
FPK699: Weighted UEFA
Portagoal Fittings
N. M10 Nord-Lock Washer
O. Net Strap
P. Net Hook
Q. 8mm Key
R. 6mm Key
S. 4mm Key
Hex
Hex
Hex
Fittings Pack Contents
N.
x12
BOL714
Q.
x1
BOL790
R.
x1
BOL791
Page 4
Code
Product
FBL-699
3G Weighted UEFA Portagoal
S.
x1
BOL793
O.
x4
STR110

Code
Product
FBL-699
3G Weighted UEFA Portagoal
Assembly Instructions
1Slide two M10x25mm Square Screws (J) into the Crossbar (1) channel and two into each
Upright (2,3). Slide the Uprights over the plate in the Crossbar, leaving no gap. Place an L Plate
(A) over the Square Screws, locating it in the channel of the Crossbar and Upright. Secure the
Uprights to the Crossbar using four M10 Nyloc Nuts (M), three M10 Washers (L) and a Net Holder
Clip (D) per Upright. Leave the top of the Net Holder Clip open for fitting the net at a later stage.
Page 5
1
17mm
2Slide the Ballast Tube (10) into the Backbar (5), ensuring the Ballast tube sits centrally in the
Backbar. Slide one Solid Ballast (9) into each end of the Ballast Tube within the Backbar.
3
M
A
D
L
J
2
1
3
8
9
5

Code
Product
FBL-699
3G Weighted UEFA Portagoal
Page 6
4Slide two M10x25mm Square Screws (supplied with the CAM Raise Wheels (13,14)) into each
Sidebar, positioning one behind both fixing holes and one in between the fixing holes. Slide
the Crossbar and Upright assembly into the Sidebar and fix in place using two M10x30mm Cap
Screws per Sidebar.
8mm
iINFO: The uprights will have approximately 1° of forward lean at
this point. This will be counteracted by net tension when fully
assembled.
4
3
G
J
3Slide the Net Support Brackets (6,7) into the Backbar (5) and Sidebar (4), secure in place
using a hand tightened M10x30mm Cap Screw (G) in the hole farthest from the bracket tube.
Repeat this step for the Sidebars, again hand tightening the M10 Cap Screw in the hole farthest
from the bracket tube. Leave the remaining holes free of bolts.
4
7
5
4
6
6
G
5
4

Code
Product
FBL-699
3G Weighted UEFA Portagoal
Page 7
5Fix the CAM Wheels (13, 14) to the Sidebars using two M10 Square Screws (fitted in step 4),
two Aluminium Spacers and two M10 Binx Nuts (supplied with FPK321). Fix the Hi-Raise
Wheels (11, 12) to the Backbar and Sidebar using three M10x50mm Button Head Screws (I), three
M10 Nord-Lock Washers (N) and an Aluminium Spacer and Spacer Plate (both supplied with
FPK282). The remaining M10x25 Square Screws and M10 Binx Nuts supplied with FPK282 are not
required with this product, please keep for spares. Tighten the M10x30mm Socket Screws
previously fitted in step 3.
13
3
4
Aluminium
Spacer
M10 Binx
Nut
11
I
N
Aluminium
Spacer
Spacer
Plate
17mm
iINFO: Twelve M10x25mm Square Screws and twelve M10 Binx
Nuts will remain unused upon completion of the goal assembly.
They are not required for this product when fitting wheels,
please keep for spares.
6mm

Code
Product
FBL-699
3G Weighted UEFA Portagoal
7Slide three M10 Square Screws into the channel in each Net Support (8). From the covered
end of the Net Support, slide one M10 Square Screw around a third of the way down and
position the remaining two near the plate. Affix the M10 Spacer (F) to the Strap Bracket (B) using
an M10x40mm Button Screw (H). Place the Strap Bracket assembly over the M10 Square Screw
placed a third of the way down the Net Support and fix in place with an M10 Handwheel (E). To
move the bracket, loosen the handwheel and slide along the section, tighten to fix the position.
Place the Top Bracket (C) over the two M10 Square Screws near the top of the Net Support and fix
in place using two M10 Nyloc Nuts and two M10 Washers.
Page 8
M
C
L
J
8
H
F
B
E
J
8
8
17mm
6mm
8Place the Net Supports in the Net Support Brackets in the rear of the goal.
8

Code
Product
FBL-699
3G Weighted UEFA Portagoal
Page 9
9To attach the Net, hook the top corners over the Net Holder Clips and secure with an
M6x10mm Button Screw (K). Attach a Net Hook (P) to every other mesh on the Net, insert
the Net Hook into the channel in the back of the goal and twist to lock. Repeat all the way around
the net.
4mm
K
Net
P
P
1Remove the carbine clip from the single end of the Net Strap (O). Feed it through the Top
Bracket and reattach the carbine clip and clip the Net Strap onto the Strap Bracket. Clip the
shorter strap onto the rear corner mesh of the Net, take the longer strap and count 18 meshes into
the Net and clip on. Repeat for both sides. Loosen the Handwheel on the Strap Bracket and slide it
down the Net Support until the net is tensioned. Tighten the Handwheel to fix the net in place.
Repeat for the opposite side.
mn
mn
O
O
Net Assembly